







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Ventura Homeowners Choose KraftMaid Construction
We provide independent Ventura Kraftmaid service for cabinet repair, installation, and refacing throughout the area. If you own KraftMaid cabinets and something’s loose, peeling, or pulling away from the wall, we fix it using exact-match hardware and finish-matching techniques that most general contractors don’t bother with. We’re not affiliated with or authorized by KraftMaid. We’re a local Ventura cabinet crew that has worked on enough of their product lines to know what holds up and what fails in coastal air. Call (831) 604-3426 for a free estimate on any KraftMaid repair or kitchen remodel.
Kraftmaid in Oak View and throughout Ventura shows up in a lot of kitchens, from Pierpont beach cottages to mid-century ranches in Midtown. What most homeowners don’t realize until something breaks is that KraftMaid has changed how they build cabinets over the decades, and each generation has its own weak points. We know those weak points because we’ve opened enough of them up. The salt-laden fog that rolls through Ventura accelerates what would be a slow cosmetic issue inland. Door edges peel faster. Screw holes strip sooner. Particleboard boxes swell where pinhole leaks go unnoticed. That’s the reality of owning KraftMaid cabinets near the coast, and it’s exactly the kind of work we handle.
Why Trust Sawyer Remodel Ventura for Your KraftMaid Construction?

That means we catch a hinge plate that’s starting to back out before the door sags onto the counter.
Every KraftMaid job we take runs under The Relay Visibility Guarantee: a written price before work starts, a live arrival time, and before-and-after photo updates. You know who is walking into your home, when they’ll arrive, and what the invoice will say before a single tool comes off the truck. If something isn’t done right, the Done Right Promise means we make it right, in writing, for a full year after the project closes. For a homeowner with KraftMaid cabinets that are starting to show their age in Ventura’s marine air, that guarantee matters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Ventura
- Delaminating thermafoil doors on older KraftMaid lines. We see the vinyl peel starting at inside corners within 6 to 10 years in Ventura’s salt air, especially on kitchens that face the ocean. Once moisture gets behind the thermafoil, the door can’t be glued back. The fix is refacing with new doors or replacing the worst sections before the peeling spreads.
- Adjustable shelf clips snapping under heavy dish loads. This shows up on 3/4-inch side panels where KraftMaid drilled the shelf-pin holes slightly off-center. The clip bears uneven weight and pops. Owners tell us they hear a crack, then find a shelf of plates tipped into the cabinet. We replace the clips with cabinet-grade pins and often re-drill or sleeve the holes so the new clips seat properly.
- Drawer glide screws pulling out of the particleboard box sides. Older KraftMaid boxes used particleboard that doesn’t hold threads well after repeated opening and closing. The glide wobbles, the drawer starts to catch, and eventually the screw strips completely. We drill the stripped holes, set threaded inserts, and re-mount the glides so the drawer moves like it should.
- Hinge plate screws stripping in the face frame. Mid-2000s KraftMaid cabinets often had undersized pilot holes for hinge plates. After a decade of use, the screws lose their grip and the door hangs crooked. We re-bore and set the plates with proper cabinet-grade fasteners, not drywall screws.
- Swollen bottom panels from sink drain leaks. A pinhole leak under the sink goes unnoticed, the bottom panel of a base cabinet absorbs water, and the particleboard swells. Once that happens, the panel is done. We replace the cabinet section or plan a reface rather than patching water-swollen material that will keep degrading.
On a 1970s beachside bungalow near Ventura Harbor, we pulled out a KraftMaid Benton wall cabinet with a swollen bottom panel from a pinhole sink drain leak. Our tech matched the existing maple finish with a current Benton door, reused the original hinge plates, and reinforced the side panel screw holes with threaded inserts so the new cabinet hung solid without needing full refacing.
KraftMaid Parts & Our Repair-vs-Replace Approach

We use genuine leftover OEM parts when we can salvage them from demo or from hardware you’ve already got on hand. That’s the best case for finish matching and original fit. For faster turnarounds, we source exact-match cabinet-grade hinges, glides, and shelf pins from local Ventura suppliers. We don’t hand you big-box generic hardware unless you specifically ask for it. The difference matters: a cabinet-grade full-extension glide lasts years longer than a hardware-store version, and the factory-matched finish on a hinge hides the repair.
We’re straight about repair versus replace. If the cabinet box is delaminating or water-swollen, we won’t sell you new doors and call it fixed. The box is what anchors everything, and once it’s compromised, you’re throwing money at the face. In that case, we plan cabinet refacing or a full pull-and-replace for those sections. If it’s a hinge, a glide, a shelf clip, or a door panel, that’s a repair, and we’ll tell you so. Call (831) 604-3426 and we’ll give you an honest read before any work is scheduled.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open every affected cabinet, remove the door or drawer, and look at how the hardware failed. Is the screw stripped, the hole wallowed out, the panel swollen, or the thermafoil lifting? KraftMaid issues have patterns, and we identify which one you’re dealing with before touching anything further.
- 2
Repair or install. If it’s a fix, we use OEM-salvaged or exact-match cabinet-grade parts. If it’s a reface or new install, we measure each cabinet opening individually because KraftMaid boxes from different years don’t always share identical dimensions, even within the same model line.
- 3
Test. Every door and drawer gets opened and closed repeatedly. We check alignment, clearances, soft-close action where applicable, and make sure the finish matches the surrounding cabinets under real kitchen lighting, not just shop light.
- 4
Warranty. The work is covered under our Done Right Promise. If something that was repaired or installed doesn’t hold up within a year, we come back and make it right. That’s in writing on every KraftMaid job, no exceptions.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Ventura
We work on KraftMaid’s current and legacy lines: Vantage, PureStyle, Hudson, and Benton. That covers framed and frameless construction, thermafoil and painted finishes, and full-overlay door styles. On the installation side, we handle cabinet installation and refacing, kitchen design and layout for remodels that keep existing KraftMaid boxes, and small or partial kitchen remodels where you’re adding a run of cabinets or reconfiguring what’s already there. We keep common hinge plates, glide sets, shelf clips, and touch-up kits in our on-hand inventory so we’re not making a second trip for a basic repair.
We Also Service These Brands
KraftMaid is one line we know well, but it’s not the only one. We also install and service cabinets and countertops from Cambria, Silestone, Kohler, and Toto. If your Ventura kitchen mixes cabinet brands or you’re planning a remodel that pairs KraftMaid boxes with Cambria countertops, we can handle the whole scope as your General Contractor without splitting the job between crews.
FAQs – KraftMaid Construction Service in Ventura

Yes, in most cases. We match discontinued KraftMaid finishes by pulling sample doors from your existing cabinets and working with local Ventura finishing suppliers to blend a custom match. The result isn’t always factory-identical, especially on older thermafoil lines that have yellowed with age, but we can usually get close enough that the eye doesn’t catch it. Call (831) 604-3426 and we’ll tell you whether your specific finish is matchable before you spend anything.
Yes. If the cabinet boxes are solid, we reface just the doors and drawer fronts. The peeling you’re seeing is thermafoil delamination, and once it starts, it doesn’t stop. New doors with a painted or laminate finish solve it for good. If the boxes show any swelling or separation, we’ll tell you honestly that refacing the doors alone won’t hold up. Estimates are free, so call (831) 604-3426 to find out which camp your cabinets fall into.
We do. KraftMaid cabinets sold through Home Depot are the same product lines we service with Kraftmaid service in Camarillo and everywhere else in Ventura. The boxes, hinges, glides, and door styles are identical to what you’d order through a kitchen designer. We don’t care where the cabinets came from; we care about what’s failing and how to fix it properly. Call (831) 604-3426 if yours came from a big-box store and you’re wondering whether they’re worth repairing.
The most common cause is the particleboard screw holes in the cabinet box losing their grip. KraftMaid boxes from the 1990s and 2000s used particleboard that simply doesn’t hold screws forever, especially in Ventura’s humidity swings. The glide screws work loose, the drawer starts to bind, and eventually the glide pops off its track or the screw pulls out entirely. The fix is threaded inserts and properly sized cabinet-grade screws, not just cranking the old screws back in.
In many cases, yes. If the boxes are sound, we can rework the layout by moving cabinet runs, adding or removing sections, converting a base cabinet to drawers, or rebuilding the sink base if it’s water-damaged. This works best on KraftMaid’s framed lines, where the face frames give us more structural flexibility. We’ll tell you up front if your specific layout has a dealbreaker. Call (831) 604-3426 for a free assessment.
KraftMaid cabinet installation in Ventura typically runs $4,000 to $13,000 depending on the number of cabinets and whether it’s new construction or replacement. A full kitchen remodel with KraftMaid cabinets lands between $14,000 and $45,000, while a small or partial kitchen remodel runs $9,000 to $20,000. Those are real Ventura market ranges, not national averages. Here’s the breakdown:
| Service | Ventura Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
Your exact number depends on how many cabinets, the condition of what’s staying, and whether you’re refacing or replacing. Call (831) 604-3426 for a written estimate, no phone tag.
Book Your KraftMaid Service in Ventura, CA
If your KraftMaid cabinets are peeling, sagging, or pulling away from the wall, we’ll give you a straight answer and a written price before any work starts. Call (831) 604-3426 to schedule your free estimate. The work says it. We just show up and cut straight.
Written by the team at Sawyer Remodel Ventura.


