







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Ventura Owner’s Guide
If you’re searching for KraftMaid bathroom remodeling in Ventura, you’re likely dealing with a cabinet door that won’t stay shut, a vanity front that’s warped from coastal moisture, or a drawer glide that’s given up after years of daily use. Here’s the straight answer: a full KraftMaid bathroom remodel in Ventura typically runs $9,000 to $28,000 installed, and we can usually begin sourcing parts within a day or two of your call. We’re an independent Ventura contractor, not a KraftMaid dealer, which means we don’t push you toward replacing everything just because one component failed. Most owners discover the problem the way you did: a hinge pops, a soft-close mechanism stops catching, or a drawer front starts pulling away from the box. The good news is KraftMaid cabinetry is built for repair, not just replacement, and we stock the common failure parts on hand.
The Relay Standard applies here like every job we run in Ventura: written price before work starts, live arrival time, and photo updates so you’re never guessing what’s happening in your own bathroom. Call (831) 604-3426 and you’ll get a real person, not a voicemail tree.
Which KraftMaid Models This Applies To

KraftMaid bathroom lines break down into a few series families, and compatibility matters more than most homeowners expect. The big three you’ll see in Ventura homes are KraftMaid Vantage, KraftMaid Venicia, and the newer KraftMaid Core line. Vantage and Core use framed construction with standard 3/4-inch plywood boxes; Venicia is the frameless, full-overlay European-style line with different hinge geometry entirely. A Vantage hinge will not work on a Venicia door, period. We’ve seen homeowners buy parts online and discover this the hard way.
To identify what you have, open a door and look at the hinge cup. KraftMaid stamps part numbers on the hinge arm or the inside of the drawer box. The measurement that matters most is the overlay: Vantage typically runs 1/2-inch overlay, Venicia runs full overlay at 1-1/4 inches. If you can’t find the stamp, measure the overlay and we can match it. OEM KraftMaid parts are worth the extra cost on hinges and soft-close mechanisms because the mounting hole patterns are proprietary. For drawer glides, a quality aftermarket Blum or Salice unit often works if the specs line up, and we tell you honestly which route saves money without compromising the fit.
One compatibility gotcha specific to KraftMaid in coastal Ventura climate: the melamine-covered drawer boxes from the Core line are more susceptible to humidity swelling than the solid-wood dovetail boxes in Vantage. If your bathroom doesn’t have a working exhaust fan, that’s the first thing we’ll check, because the cabinetry failure you’re seeing now is often the first symptom of a ventilation problem that will take out new parts the same way.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Key Takeaways
- Full KraftMaid bathroom remodel in Ventura: $9,000 – $28,000 installed.
- We stock common KraftMaid drawer glides, soft-close hinges, and touch-latch catches on hand.
- Hinge replacement and door re-alignment are usually same-day jobs given parts availability.
- The Relay Visibility Guarantee covers every repair: written price first, live arrival time, before-and-after photos.
- Coastal humidity failure modes in Ventura differ from inland CA; ventilation check is included.
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Door won’t stay shut or won’t self-close: The soft-close mechanism inside the hinge has worn out or the spring clip has cracked. KraftMaid hinges from the Vantage line typically last 8 to 12 years with daily use; in a humid Ventura bathroom without good ventilation, that drops to 5 or 7.
- Drawer front pulled away from the box: The front screws have stripped in the particleboard or the locking clip has failed. We see this more often on Core line drawers where the material density is lower than the dovetail Vantage boxes.
- Drawer sticks, scrapes, or falls off the track: The nylon rollers on the glide have worn flat or the track itself has bent. Replacing a glide is straightforward; the trick is matching the slide length and extension rating to KraftMaid’s original spec.
- Warped door or drawer front near a shower or tub: Moisture swelling, not a part failure. In Ventura homes where bathroom fans are undersized or never upgraded, we see veneer delamination on the bottom rail across Vantage and Core alike.
- Hinge cup holes stripped or cracked: This typically happens after a prior hinge replacement used longer screws than the cabinet material could handle. We repair the cup with epoxy fill or fresh dowels, then remount with the correct length.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full KraftMaid bathroom remodel in Ventura, plan on broad installed range of $9,000 to $28,000. That spread depends on bathroom size, whether you’re reconfiguring the vanity footprint or keeping the same layout, and how much of the existing KraftMaid cabinetry can be salvaged versus replaced. A partial refresh, like new doors, drawer fronts, and hardware on existing boxes, lands toward the low end. A full gut with new KraftMaid Vantage cabinets, countertops, sink, faucet, and shower surround pushes toward the high end.
To isolate just the vanities: cabinet work alone usually runs $4,000 to $13,000 installed in Ventura, and countertop installation adds another $2,000 to $6,500 depending on material. Every quote is written and line-itemed before we touch a tool: parts, labor, disposal, and the wrap-up walkthrough all spelled out. The number on the invoice is the number you approved, because that’s the whole point of The Relay Standard. If something we repair fails inside a year, the Done Right Promise means we come back and make it right, no debate and no charge.
DIY or Call Us?

Here’s where we draw the line. Adjusting a door, tightening hinge screws, and cleaning glide tracks are all things a careful Ventura homeowner can do in an afternoon. Those don’t require tools beyond a Phillips head and patience. What goes wrong is when someone tries to replace a soft-close hinge without matching the overlay spec, or drills new hinge cup holes into a door that’s already structurally compromised. We’ve walked into bathrooms where a homeowner tried an aftermarket hinge on a Venicia door and split the stile. That repair ended up costing more than the hinge would have, and it cost a door that KraftMaid no longer produces in that exact finish.
If the work involves drawer box replacement, veneer repair, or anything requiring a router and a jig, call us. No part on this page involves high-tension springs or electrical work, so this is a rare area where DIY mistakes are more about expense than injury. Still, if you want it done once, with the right parts and a written warranty, call (831) 604-3426. That’s the test we use before we call a job done.
FAQs
KraftMaid bathroom cabinets typically last 15 to 25 years in Ventura homes with adequate ventilation, though hardware like hinges and glides generally needs replacement every 8 to 12 years. Coastal moisture cuts both numbers if the bathroom fan isn’t moving enough air. Call (831) 604-3426 for an honest assessment, not a sales pitch.
Yes, most single-part failures, like a soft-close hinge or drawer glide, can be repaired by replacing just that part with a KraftMaid OEM unit, often for under $300 installed. The decision to repair versus replace depends on the cabinet material around it; if the hinge cup has cracked through, the repair gets more involved. We’ll tell you which route makes sense for your bathroom before any work starts.
Hinge and glide replacement on one or two drawers typically takes 1 to 2 hours once the OEM parts are in hand. A full vanity rebuild with new doors and drawer fronts takes 1 to 3 days depending on whether we’re refinishing or ordering finished components. Every job includes a written timeline before we schedule.
We stock common KraftMaid-branded soft-close hinges, drawer glides, and touch-latch hardware on hand, and we can order the Vantage, Venicia, or Core-specific part you need with a typical 2 to 5 day turnaround. If the part number is still stamped on your hinge or glide, that cuts the lead time. We also stock compatible fixtures and surfaces from Cambria, Silestone, and Kohler for full bathroom projects.
No. The written quote you approve is the price you pay, and The Relay Visibility Guarantee puts that in writing before a single tool is picked up. If we find hidden damage during the repair, we stop, show you photos, and get your sign-off on a written change order, never a surprise at the invoice.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


