A Sawyer company - serving Ventura, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Cambria Home Additions & ADU Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
A remodeled kitchen with painted cabinets and a farmhouse sink
An open kitchen and dining area after a remodel
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambria Home Additions & ADU: The Ventura Owner’s Guide

A Cambria home addition or ADU in Ventura typically costs $45,000 to $130,000 when built by a licensed contractor, and the timeline runs 10 to 16 weeks depending on permitting and site conditions. If you’re reading this because a planned addition stalled, a permit got flagged, or an old Cambria quartz countertop from a previous remodel needs to come out before walls move, we handle the whole sequence, including removal and reinstallation of existing Cambria surfaces so they survive the construction process. Most Ventura owners discover a problem at two points: when the city pulls up setback or flood-plain requirements on their lot, or when someone lifts an old Cambria slab the wrong way and it cracks at the edge.

Call (831) 604-3426

Which Cambria Models This Applies To

Cambria doesn’t make home additions or ADUs as a product, but Cambria quartz appears in nearly every Ventura addition and ADU we build because it holds up to coastal humidity and kitchen abuse better than most natural stone. The relevant compatibility question is your existing slab: Cambria’s standard thicknesses are 2 cm and 3 cm. The 3 cm slabs carry their own edge profile and don’t need plywood underlayment, while 2 cm slabs do. If you’re adding a wet bar or outdoor kitchen to the ADU and want the new Cambria to match old counters in the main house, you’ll need the color name and lot number from the original install, we can read it off the slab back if you still have a remnant. Knot an issue for walls and roofs, but it matters the day cabinets go in and the counter has to land on them. We’re an independent Ventura contractor, not a Cambria affiliate, so we’ll tell you plainly when an aftermarket edge profile or seam placement will save you money without showing in the finished room.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambria Home Additions & ADU Is Failing

  • Cracks at inside corners. When the foundation of a newer ADU settles, the countertop doesn’t flex with it. Cambria is quartz polymer, so stress concentrates at the sink cutout or the corner where an L-shape turns, and you’ll see a hairline crack there first.
  • Seam separation on a long run. In a Ventura room addition with a 10-foot-plus island, slabs are joined at a seam. If the cabinet level drifts even 1/8 inch, the seam opens and the fill color shows against the pattern, a dead giveaway the subfloor wasn’t flat.
  • Drawers that drag or stick under the weight. A Cambria top adds real load. Soft-close hardware that worked under laminate sometimes binds under quartz, especially when an addition’s floor framing runs parallel to the cabinet run and deflects.
  • Water staining at the backsplash joint. Cambria itself won’t stain, but the silicone joint where slab meets tile breaks down in about 5 to 8 years of Ventura sun and steam. Once water gets behind, the wall below starts to swell and the top begins to look like it’s pulling away.
  • A 2 cm top that’s been extended over a dishwasher gap unsupported. Some owners save money with 2 cm Cambria on a remodel, then a dishwasher gets swapped and the new unit needs more clearance. Without the right support bracket, the overhang flexes and eventually snaps at the appliance cutout.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For an addition or ADU in Ventura, a full build with Cambria countertops included runs $45,000 to $130,000, while the strip-and-replace of Cambria surfaces alone inside that project falls in the $2,000 to $6,500 range depending on square footage and edge profile. What drives the spread on the big number is foundation type, permit fees, and whether your lot triggers coastal or seismic requirements. On the countertop side, the spread comes down to thickness, color tier, and how many seams the layout forces. Our written quote separates demolition, disposal, framing, drywall, plumbing rough-in, electrical, cabinet install, countertop install, and finish work so you see the price of each piece before we start.

DIY or Call Us?

If you’re planning an ADU or addition in Ventura, the DIY line isn’t about the Cambria top, it’s about the permit set and the structural work under it. You can safely handle paint color selection, fixture shopping, and keeping the job site clean. You should not be cutting roof framing, moving a load-bearing wall, or running a new subpanel without a licensed contractor who carries the right coverage. This is where electrical panels and tall ladder work come in, and both are genuinely dangerous when rushed by someone on their third YouTube tutorial. And a cracked Cambria slab at an inside corner is not something you glue back together, the material is too rigid and the repair will read from across the room. Call (831) 604-3426 if you want us to walk the site first.

FAQs

Installers leveling a new base cabinet during a kitchen remodel

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch