A Sawyer company - serving Ventura, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

IKO Kitchen Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A remodeled kitchen with painted cabinets and a farmhouse sink
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A wood double vanity with two mirrors after a bathroom remodel
An open living space after a whole-home remodel
A finished backyard cottage with a small covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

IKO Kitchen Remodeling: The Ventura Owner’s Guide

If you’ve got an IKO kitchen and a part that’s failed or worn out, we can match it and install the replacement. A full IKO kitchen remodel in Ventura typically runs $14,000 – $45,000, but a single part swap, like a cabinet door, drawer glide, or trim piece, is often a few hundred dollars installed. Most Ventura homeowners discover the problem the same way: a drawer that won’t close, a hinge that’s sagging, or a finish that’s peeling along the toe kick where water pooled from the sink.

Call (831) 604-3426

Sawyer Remodel Ventura is an independent remodeling contractor in Ventura, not an IKO dealer or affiliate. That matters because we’re not tied to a single parts pipeline. If the OEM part is backordered or overpriced, we’ll tell you, and we’ll show you a quality equivalent that fits the same cabinet box and door profile.

Which IKO Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

IKO manufactures several kitchen cabinet and millwork lines, and the parts aren’t always interchangeable across them. The two most common in Ventura homes are the IKO Classic line and the IKO Cambridge series. Classic uses 3/4-inch face-frame construction with standard 35mm cup hinges. Cambridge is a frameless line with 18mm panel construction and soft-close hardware from the factory. A hinge from one will not mount correctly to the other without adapter plates, and in some cases the door bore pattern is off by 2mm.

Here’s the compatibility gotcha we see constantly in Ventura: even within the same line, IKO changed drawer glide mounting positions between production years. A 2016 Cambridge drawer box won’t accept a 2021 glide without new pre-drilled holes and a spacer block. Our field techs carry both mounting patterns on hand so we’re not making a second trip.

For Ventura homeowners, cabinet finish and hinge wear also differ from other climates. Coastal humidity near Ventura Harbor accelerates hinge corrosion and cabinet swelling, especially on unsealed edges. If your kitchen is within a mile of the water, we recommend sealed or upgraded hardware.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your IKO Kitchen Remodeling Is Failing

  • Drawer or cabinet door rubs the frame when opening or closing. This usually means hinge screws have stripped or the box has shifted from high summer humidity, common in Ventura’s Midtown and College Area homes where kitchens sit against exterior walls.
  • Soft-close mechanism slams shut or catches mid-close. The internal damper wears out. On IKO Cambridge units, the damper is integrated into the hinge cup and can’t be lubricated. Replacement is the only real fix.
  • Finish peeling or bubbling on lower cabinet doors. Water gets past the sink’s drip edge and wicks into the door’s bottom rail. Once MDF core swells, sanding won’t save it. The door is done.
  • Toe kick separating from the cabinet base. Dishwasher steam and floor mopping both attack that seam. On older IKO Classic installs in Ventura, the toe kick was often attached with staples rather than mechanical fasteners. Once it separates, the whole run needs re-securing.
  • Adjustable shelf brackets slipping or popping out. The plastic clips deform after repeated loading. It’s an inexpensive part, but if you ignore it, the shelf drops and cracks the cabinet side panel. That becomes a cabinet replacement instead of a five-dollar clip.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A wide opening with a new beam where the kitchen wall was removed

Here’s the honest range for Ventura, because you shouldn’t have to call just to know if it’s in your ballpark:

  • Single hinge or glide replacement: $45 – $120 installed (part plus labor)
  • Drawer box rebuild or replacement: $180 – $400 per drawer
  • Cabinet door replacement (matched finish): $150 – $450 per door
  • Full cabinet refacing compatible with IKO boxes: $8,000 – $18,000
  • Complete IKO-style kitchen remodel in Ventura: $14,000 – $45,000

The big range on full remodels comes down to cabinet count, countertop material, and whether you’re moving plumbing or electrical. What’s always included from us: a written price before any work starts, the exact part or replacement material specified on the invoice, and our Done Right Promise. If something that was serviced fails within a year, we come back and make it right. Covered, no argument.

DIY or Call Us?

For a single hinge or shelf clip, a comfortable homeowner can handle it yourself. You’ll need a Phillips screwdriver, the right hinge, and patience to align the door so it doesn’t bind. The mistake we see most in Ventura: installing a hinge from the wrong IKO line because the online listing said “compatible.” If the screw holes don’t line up, don’t force it. Stripped cabinet panels are harder to fix than a hinge swap.

For anything involving gas, electrical, or structural cabinet removal, call a pro. Removing an upper cabinet that holds a range hood or wiring without proper support is a fast way to damage drywall, or worse. The Sawyer crew have been pulling cabinets in Ventura for years. If you’re not sure, call (831) 604-3426 and describe the part. We’ll tell you over the phone if it’s a DIY fix or worth booking a service call.

FAQs

A remodeled hall bathroom with subway tile and a floating vanity

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch