







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The Ventura Owner’s Guide
A full Tamko bathroom remodel in Ventura typically runs $9,000 to $28,000 installed, depending on the size of the space, the scope of the tear-out, and the fixtures you choose. Sawyer Remodel Ventura is an independent contractor, not a Tamko dealer, but we work with Tamko waterproofing, backer board, and membrane systems regularly, and we know what holds up in coastal Ventura humidity and what fails first.
Most Ventura homeowners don’t find us because they’re comparing Tamko products on a spec sheet. They find us because the shower pan leaked, the tile started lifting, or the grout turned to chalk two years after the original install. By then, the framing behind the wall has usually been sitting wet for months. That’s the project we’re quoting, and it’s almost never just a surface fix.
Which Tamko Models This Applies To

Tamko makes a range of building products, but in bathroom work we’re dealing almost entirely with their waterproofing and underlayment lines: Tamko’s Proline backer board, their masonry and tile waterproofing membranes, and the Tamko shower pan and moisture barrier systems used under tile and stone.
The compatibility gotcha most owners miss: Tamko’s waterproofing membranes and backer boards are spec’d for specific thin-set mortars and specific tile weights. If the original installer grabbed whatever mortar was on sale at the big-box store, the bond fails early even when the Tamko product itself is fine. When we open up a failed Ventura shower, we’re checking the Tamko label code against the mortar residue, because mismatched materials are the leading cause of premature failure we see in four out of five tear-outs.
On the OEM-versus-aftermarket question for Tamko bathroom systems: Tamko’s waterproofing and backer board products are the OEM, and in a wet-area application there’s no good reason to substitute a no-name membrane to save $40 on a $12,000 remodel. The aftermarket equivalents worth using are things like higher-end grouts, silicone sealants, and edge trims, where a brand like Laticrete or Schluter is genuinely better for coastal Ventura conditions. For the Tamko membrane itself, stick with Tamko or a manufacturer-approved equivalent the first time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
- Grout cracking or falling out along the shower floor perimeter. This means the shower pan or substrate has movement under the tile, and water has been working into the mortar bed or the Tamko membrane below. Once that membrane is compromised, the fix is a full pan replacement, not re-grouting.
- A persistent musty odor that won’t leave the bathroom. Water is trapped in the wall cavity or under the floor. By the time you can smell it through the grout lines, the bottom plates and studs have been wicking moisture for weeks or months in Ventura’s humid spring months.
- Tiles that sound hollow when tapped. The thin-set bond has released from the Tamko backer board or membrane, usually from movement or from the wrong mortar being used originally. Hollow-sounding tiles are already loose, and tile doesn’t heal itself.
- Dark staining or soft drywall at the base of an adjoining wall. Water has escaped the wet area entirely and is traveling into framing outside the shower footprint. This is a structural issue now, not a cosmetic one.
- Public water pressure drops or a spinning toilet flange. It means the subfloor around the toilet has rotted, and the flange bolts have nothing to bite into. That rot usually traces back to a failed shower or tub waterproofing detail nearby.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Ventura, a full bathroom remodel involving Tamko waterproofing replacement lands between $9,000 and $28,000. A small hall bath with a tub-to-shower conversion and new Tamko pan starts around $9,000. A primary bath with a walk-in shower, body sprays, custom tile, and a new vanity can push toward $28,000.
What moves the number: whether framing needs to be repaired or replaced after a leak, the square footage of tile and waterproofing surface, whether we’re moving plumbing, and the fixture finishes you choose. Kohler and Moen hardware, Cambria or Caesarstone tops, KraftMaid cabinetry if you go that route, all of it changes the line items.
Every estimate from Sawyer Remodel Ventura comes as a written price before any work starts, and that’s the number on the invoice, not a starting point. Our Done Right Promise covers the workmanship and waterproofing install for a full year, in writing.
DIY or Call Us?
Here’s the honest split. You can safely check the caulk lines, see if tiles are loose, and look for discolored drywall at the shower base. That tells you what you already suspect: there’s a problem.
What you shouldn’t do is start pulling tile to “take a look” behind the wall. In a Ventura bathroom that’s been leaking, the framing you expose may be carrying mold, and you’ll also break whatever waterproofing membrane is still working. Worse, the first tile you pull from a shower wall can release a panel of wet, heavy backer board onto you. The right move is to stop using the shower, point a fan at it, and call us at (831) 604-3426. We’ll cut a clean inspection opening, show you photos of what’s behind the wall, and give you a written price to fix it right.
FAQs

A properly installed Tamko membrane and pan in a Ventura home should last 20 to 30 years, with coastal humidity being the main wear factor. But a single bad mortar choice at install can cut that to under five. When we inspect, we’re looking at how the original installer matched the Tamko product to the setting materials, not just the age of the tile.
Sometimes, if the leak is caught very early and confined to one corner of the shower pan. But waterproofing is only as good as the seam where the patch meets the existing membrane, so most failed-pan situations in Ventura mean replacing the pan and lower wall tile. Call (831) 604-3426 and we’ll tell you straight after an inspection, with a written quote either way.
A shower pan and lower tile replacement can run three to five working days including dry time. A full bathroom tear-out and remodel runs two to four weeks depending on framing repair and custom tile. We give you a schedule up front and photo updates before and after each phase, so you’re not calling to ask where we are.
We keep Tamko-compatible membranes, pans, edge trims, and setting materials stocked for common Ventura tear-out scenarios. If your job needs a specific Tamko SKU we don’t have on hand, we source it from a local Ventura supplier, usually same day or next day, and that lead time is in the written estimate.
If your Ventura bathroom is showing signs of a failed Tamko waterproofing system, call Sawyer Remodel Ventura at (831) 604-3426 for a free inspection and a written price. We also work with KraftMaid cabinetry, Cambria countertops, and Silestone surfaces if your remodel goes beyond the tile and the pan.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


