







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Driveway & Pavers: The Ventura Owner’s Guide
We stock and install Tamko-compatible driveway pavers and replacement parts throughout Ventura, with installed paver driveway work typically running $7,000 – $18,000 depending on square footage, base condition, and paver style. Most paver repairs and section replacements can be scheduled within a few days, not weeks. Homeowners usually find us the same way: a section of pavers has shifted after winter rain, a vehicle left a low spot that now pools water, or the original install used a base that’s slowly failing under Ventura’s clay-heavy soil.
Tamko’s paver lines aren’t just one product. The brand shifted over the years from roofing-dominant into composite decking and hardscape-adjacent materials, and the driveway and paver category is where model identification matters most. If you’ve got a failing section, the first thing we do is identify exactly what’s underfoot so the replacement matches, drains, and doesn’t telegraph the patch job.
Which Tamko Models This Applies To

Tamko’s hardscape and paver offerings run narrower than their roofing catalog, which works in your favor when matching. Most Ventura driveways we service fall into Tamko’s interlocking concrete paver series or their permeable paver line. The permeable models are increasingly common in Ventura because the city’s stormwater requirements push new driveway installs toward surfaces that let water through rather than sending it all to the gutter. That’s a compatibility gotcha most homeowners don’t know: if your original pavers were permeable and you swap in standard pavers, you can run into drainage code issues on replacement inspections. We verify the paver type before quoting.
Identification is straightforward. Pull one paver from an edge and check the underside for a molded stamp. Tamko stamps model codes on most units. Measure the paver face, thickness, and the spacing lugs. If the stamp is worn or missing, thickness is the next best tell: most Tamko driveway pavers run 60mm or 80mm thick, while patio-grade units run 45 – 60mm. Driveway traffic needs the thicker units. Aftermarket equivalents exist and we’ll quote them when OEM matching isn’t practical, but Tamko’s color blends are distinct enough that mixing brands mid-driveway usually looks worse than waiting a few extra days for a proper match.
We also stock parts for KraftMaid, Cambria, and Silestone products, but this page is about getting your Tamko surface right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Driveway & Pavers Is Failing
- Paver shifting or spreading at the edges. This usually means the edge restraint failed or was never installed properly. Ventura’s rainy winters soften the soil at the perimeter, and without a solid edge, the whole field starts to creep.
- Low spots that hold water after rain. The base is settling unevenly, often because the original install skimped on compaction or used too thin a base layer for Ventura’s expansive clay. Standing water accelerates freeze-thaw and paver degradation.
- Cracked or chipped pavers in the wheel track. Traffic load plus a thin base equals point-load cracking. We see this most on driveways where the original install used patio-grade pavers instead of the 80mm driveway units.
- Weeds or grass pushing up between joints. The joint sand has washed out and the polymeric binder (the sand-and-polymer mix that locks joints) has failed. Once that happens, pavers start moving independently and the damage compounds.
- White haze or surface flaking on the pavers. Efflorescence on newer pavers or face delamination on older ones. Coastal air in Ventura accelerates surface wear on pavers that weren’t sealed or have outlived their sealant.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Tamko driveway and paver work costs in Ventura, installed:
- Paver driveway installation (new): $7,000 – $18,000
- Paver driveway section repair: $1,200 – $4,500 depending on section size and base rebuild
- Paver patio installation (new): $3,500 – $11,000
- Driveway replacement (full tear-out and install): $5,000 – $14,000
- Driveway sealing (paver-specific sealant): $250 – $700
The range comes down to three things: how much base work the existing surface needs, whether we’re doing a full replacement or section work, and the specific Tamko paver line you’re matching. Every quote from Sawyer Remodel Ventura includes a written price before we touch a single paver, and the number you approve is the number you pay. The Done Right Promise covers the install: if the pavers shift, sink, or the joint sand fails inside a year, we come back and fix it. Written guarantee, included, no argument.
The work says it. We just show up and cut straight.
DIY or Call Us?
Some of this you can check yourself. Pull a paver, photograph the stamp or measure the thickness, and check your joint sand. If you want to re-sand joints with polymeric sand, that’s a reasonable weekend job for a patio. Driveway pavers are a different animal. The risk isn’t just physical, it’s the base. A homeowner replacing pavers without rebuilding the base gets the same failure again in 12 months, except now they’ve spent money twice. Tamko driveway pavers are heavy, the base needs mechanical compaction in lifts, and getting the drainage fall wrong sends water toward your foundation, not away from it.
If the base is intact and you’re doing a small patch, we’ll tell you how over the phone. If you want it to stay fixed, call us at (831) 604-3426 and we’ll give you a straight answer and a written quote.
FAQs

With proper base prep and periodic re-sanding of joints, Tamko driveway pavers last 25 – 40 years in Ventura’s climate. The pavers themselves rarely fail; what fails is the base or the joint sand. Coastal air and the clay-heavy soil here mean the base and drainage matter more than the paver brand for lifespan.
No. A cracked paver keeps cracking, and once the face is compromised, water intrusion makes it worse. The repair is replacing the paver, which is a fast job if we have a matching unit or can pull from an inconspicuous area of your own driveway. Call (831) 604-3426 and we’ll match what you have.
Most section replacements are done in one to two days. Full driveway tear-outs run three to five days depending on base rebuild. We schedule a specific day, show up in uniform, and send photo updates before and after so you know exactly what happened under the surface.
We source Tamko and quality aftermarket pavers directly for every Ventura job. We don’t ask homeowners to order materials. We verify the model match, handle the order, and deliver the pavers with the crew. If you need help identifying what you have, send us a photo or call (831) 604-3426 and we’ll walk you through it.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


