A Sawyer company - serving Ventura, CA
An open living room and dining area after a whole-home remodel

Boral Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A remodeled kitchen with painted cabinets and a farmhouse sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Roofing: The Ventura Owner’s Guide

A Boral roof replacement in Ventura typically runs $15,000 to $40,000 installed, depending on the profile and square footage. If you’re looking at a repair rather than a full reroof, tile roof repair on Boral systems lands between $600 and $2,500. Most Ventura homeowners discover they need Boral-specific work after a Santa Ana wind event knocks tiles loose, or after a rainy winter exposes a cracked underlayment that’s been quietly letting moisture through for months.

Call (831) 604-3426

Here’s what matters: Boral isn’t just a brand name stamped on a tile. It’s a concrete roof tile system with specific profiles, weights, and installation requirements that differ from clay, slate, and other concrete tile manufacturers. Matching the wrong part or profile creates more than an eyesore. It creates leak paths. We stock Boral-compatible parts in our Ventura trucks, and we know which profiles are still in production and which ones need matched aftermarket sourcing.

Which Boral Models This Applies To

A remodeled staircase with wood treads and a slim metal railing

Boral’s US concrete tile lines include several profiles you’ll see across Ventura rooftops: Boral Flat, Boral Shake, Boral Slate, Boral Mission (barrel profile), and the Boral Country Shingle. Each has a different interlocking geometry. Boral Flat tiles from a 2005 build in Midtown will not lock correctly with Boral Flat tiles manufactured in 2023 without checking the mold run. The profile name is the starting point, not the finish line.

Here’s the compatibility gotcha that costs Ventura homeowners real money: Boral changed the lugs and interlock dimensions on several profiles around 2010, and again on select lines after the Westlake Royal acquisition. Two tiles can say “Boral Slate” on the invoice and still not seat together. We measure the tile width, the water channel depth, and the lug position before ordering anything. When we match a tile, we’re matching the mold, not the marketing name.

On OEM vs aftermarket: Boral (now under Westlake Royal) still manufactures many of its core profiles, so OEM sourcing is often possible for current-production tiles. For discontinued profiles, quality aftermarket tiles from other concrete tile manufacturers can work, but the color and texture match requires a physical sample against the existing roof. We’ve watched homeowners order tiles online from a photo and end up with a patch that looks like a different roof entirely. On a Boral roof, the color is baked into the concrete with iron oxide pigments, so matching means daylight comparison, not screen comparison. We do not guess on this.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Roofing Is Failing

  • Cracked or chipped tiles, usually at the corners or the interlock points. Concrete tile is strong, but a tile that’s not properly bedded flexes under foot traffic and cracks at the weak point where the water channel meets the lug. Most of the cracked Boral tiles we find in Ventura are on the lower courses, where roofers walked the eave line.
  • Displaced tiles after a Santa Ana wind event. The wind itself doesn’t always break the tile. What happens is the tile was nailed incorrectly during the original install or a reinstall from an earlier repair. Over time the nail backs out and the tile shifts. We repair these and the tile often goes right back on, properly fastened this time.
  • Granules or concrete dust building up in gutters and downspouts. A little surface wear is normal on concrete tile. Accumulation that’s consistent and heavy is not. It means the tile body is spalling, usually from freeze-thaw moisture cycles or a manufacturing flaw. Ventura’s coastal fog can accelerate this on north-facing slopes.
  • Leaks that appear not at the roof edge but in the middle of the field. Concrete tile isn’t the waterproof layer. The underlayment is. A leak in the middle of the roof often means the underlayment has failed under an intact-looking tile. We see this on Boral roofs in Ventura that were installed before synthetic underlayments became standard; the old felt has just given up.
  • Visible water staining on eaves, rafter tails, or fascia boards. This is the symptom that finally gets the call. By this point, water has been travelling under the tiles and over the underlayment for a while. The fix is more than replacing a few tiles; it’s tracing the path and repairing the underlayment at the source.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with subway tile and a floating vanity

For a full Boral roof replacement in Ventura, budget $15,000 to $40,000. That range spans a modest single-story home with a simple roof plane at the low end, up to a larger two-story home with hips, valleys, and a steep pitch at the high end. The tile profile matters too: Boral Flat and Mission profiles price differently than the heavier, more complex Shake profiles.

For a Boral tile roof repair, you’re at $600 to $2,500 installed. The range comes down to how many tiles are involved, whether we’re also repairing or replacing underlayment, and whether the damage is on a walkable low-slope section or a cut-up area that needs staging and safety setup.

Our pricing always includes the parts and labor as one written number, delivered before work starts. You’ll see the tile cost, the underlayment cost if applicable, the labor, and the disposal. No change orders mid-job. Every Boral repair we do carries our Done Right Promise in writing: if it fails within a year, we make it right. And if a repair we installed fails, the second visit is free. No argument, no re-quote.

DIY or Call Us?

There’s a lot on a roof you shouldn’t do yourself, and for good reason. Walking on concrete tile without pads breaks tiles. Working near the rake or eave on a two-story Ventura home without fall protection is exactly how people get hurt. We run safety lines, we know where the load-bearing points are, and we don’t ask you to get on a ladder.

What you can do safely from the ground: photograph the damage, note whether you see displaced tiles or missing ones, and check your gutters for tile dust and granules. That information helps us bring the right parts on the first trip. What we’d rather you not do: climb up with a bundle of roof cement and a caulking gun, because we have pulled gallons of the wrong sealant off Boral tiles that would have been a clean repair the first time. If you’re in Ventura and you’re not sure, call (831) 604-3426 and describe what you see. We’ll tell you whether it needs a service call or just a photo.

FAQs

A garage converted into a guest room and home office

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch