







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Ventura Owner’s Guide
We stock and install Boral-compatible driveway pavers throughout Ventura, with most replacements priced between $7,000 and $18,000 for a full paver driveway installation, and smaller repairs landing in the $500 – $2,500 range. You’ll typically see us on-site within a few days of your call, not weeks.
Most owners figure out something’s wrong when a paver sinks, shifts, or cracks after a rain. In Ventura, the marine air and clay-heavy soils mean water finds its way under pavers faster than people expect. Once the base layer starts moving, you get uneven surfaces, loose pavers, and edges that pull away from the driveway border. We see it in Midtown, East Ventura, and up toward the hills where drainage runs heavy.
Key Takeaways:
- Full Boral paver driveway install in Ventura: $7,000 – $18,000 depending on square footage and base condition.
- Individual Boral paver replacement or spot repair: $500 – $2,500.
- We carry Boral-compatible pavers and match existing patterns, colors, and thickness on-site.
- Written price before any work starts. Always.
- Call (831) 604-3426 for a free estimate.
Which Boral Models This Applies To

Boral paver lines that we work with most in Ventura include the Boral Clay Paver series, Boral Concrete Paver lines, and their Permeable Paver systems. Each series uses different thicknesses and joint spacing, and matching them wrong looks bad and fails faster. A Boral clay paver is typically 1-1/2 inches thick for residential driveways, while concrete pavers run 2-3/8 inches for vehicle traffic. If you’ve got a mixed install, don’t guess. The pavers are usually stamped on the underside with a series code. We match by thickness, color, and texture, not by a name on a box.
OEM Boral pavers are still the cleanest match when you’re replacing sections. Aftermarket equivalents exist, and we’ve used good ones, but the color variance on second-run concrete is real. Under Ventura sun, a slightly-off paver turns obvious within a year. For clay pavers, aftermarket is riskier because the firing temperature affects how the surface weathers. Our default is OEM Boral where it’s still manufactured. If a line is discontinued, we’ll tell you before we quote anything, and we’ll show you the closest match side by side.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Driveway & Pavers Is Failing
- Sunken or low spots. This usually means the base layer under the pavers has washed out or compacted unevenly. In Ventura, we see it after heavy rain cycles when drainage wasn’t built right originally. The paver itself is fine; the foundation beneath it gave up.
- Cracked or chipped pavers. Vehicle weight concentrated on one corner, or a paver that was laid over a void, will crack down the middle. Once one cracks, water enters and the freeze-thaw from cold snaps accelerates the damage.
- Pavers rocking underfoot. A paver that tips when you walk on it means the sand bedding layer has eroded. If you ignore it, the edges chip and you end up needing a whole section replaced instead of one paver reset.
- Weeds or ants pushing up between joints. This tells you the joint sand is gone, and that means water is getting underneath. In Ventura, the dry months let weeds root deep, then the wet months push them through any gap they can find.
- Edges spreading or border pavers separating. Without edge restraint, your Boral driveway slowly spreads toward the lawn or the street. You’ll see a gap open between the border course and the field pavers. That’s a fixable problem, but it gets worse every season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full Boral paver driveway install in Ventura lands between $7,000 and $18,000. The range is driven by square footage, access for equipment, and whether the old base can be reused or needs to be dug out and rebuilt. Spot repairs, where we pull and reset a section of failing pavers, run $500 – $2,500 depending on the size of the section and how much base repair is needed.
Every quote includes the line-item price for the pavers, the base material, the labor, and the haul-away if there’s existing material to remove. Nothing gets added at the end. Our Done Right Promise applies to paver work the same as any other project: if the pavers shift, settle, or fail within a year, we come back and fix it. Written price before work starts, live arrival time on the day of install, and before-and-after photos so you see exactly what was done under your driveway.
DIY or Call Us?
A single Boral paver that’s cracked or chipped is something a careful homeowner can swap out. Pop it out with a flat bar, check the sand underneath, drop the new one in, sweep joint sand on top. That’s honest advice. Where DIY goes wrong is when the base has failed. If you’ve got a low spot, spreading edges, or three or more pavers that rock, the issue is under the pavers, not in them. Digging out a section, compacting new base, and relaying pavers to grade takes tools most garages don’t have, and getting the drainage slope wrong in Ventura’s clay soil means you do it twice.
If in doubt, call (831) 604-3426. We’ll come look, tell you what’s actually needed, and give you a written price. If it’s a one-paver fix, we’ll tell you that too.
FAQs

A properly installed Boral paver driveway lasts 25 to 40 years in Ventura’s climate. The pavers themselves rarely fail; it’s the base that gives up first. If your driveway is sinking or spreading at year ten, the original base was the problem, not the paver.
Call (831) 604-3426 if you’re seeing movement. We’ll diagnose the base and give you a straight answer.
A cracked paver needs replacing, not patching. Once the structural face is split, it will keep cracking along the same fault under vehicle weight. We match the replacement to your existing series so the repair blends. The good news is a single paver swap is a small job, not a driveway rebuild. Call (831) 604-3426 for a free estimate on a spot repair.
A single paver or small section repair takes half a day on site, including base compaction and joint sand. A full driveway replacement takes three to five days depending on the size and whether we’re removing old concrete or asphalt. You’ll have a written timeline before we start, and live arrival tracking on the day.
We stock common Boral-compatible pavers on hand for standard replacements, and we source specific colors or series matches within a few days for larger jobs. If your exact series is discontinued, we’ll tell you before quoting and show you the closest available match. Call (831) 604-3426 and we’ll check your paver against what we carry.
We also keep parts and materials for other lines we install, including KraftMaid cabinetry, Cambria and Silestone countertops, and James Hardie siding. But Boral driveway work is its own trade. You want someone who knows how the base was built, not just someone who can drop in a paver.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


