A Sawyer company - serving Ventura, CA
An open living room and dining area after a whole-home remodel

CWS Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Fence Installation: The Ventura Owner’s Guide

A full CWS fence installation in Ventura runs $3,500 to $9,000 installed, including removal of the old fence, new posts set in concrete, rails, pickets, and hardware. For a partial repair or section replacement, most homeowners in Ventura pay $1,200 to $3,800 depending on how many panels failed and what condition the posts are in. Most owners figure out something’s wrong the same way: a gate that drags, a section of fence leaning after a Santa Ana wind event, or pickets that have started cupping and pulling off the rails. We carry CWS-compatible fence parts on hand and can usually have a section back up within a few days, not weeks.

Call (831) 604-3426

Note: Sawyer Remodel Ventura is an independent contractor. We are not affiliated with CWS, but we install and repair CWS fence systems throughout Ventura with parts matched to the original specs.

Which CWS Models This Applies To

A built-in window seat in a bay window

CWS fence systems come in a few distinct lines, and matching parts to the right series matters more than most homeowners expect. The big split is between CWS wood privacy fences and CWS ornamental iron or aluminum styles. Wood systems use either 1×4 or 1×6 dog-ear pickets on 2×4 rails, with posts typically set at 6-foot or 8-foot spacing depending on the original install. Metal systems use ¾-inch pickets with punched channel rails, and the post caps and gate hinges are series-specific. If you’ve got a CWS fence, you’ll usually find a small stamp or sticker on the inside of the gate frame or on the top rail. If that’s gone, measure the picket width and post spacing before buying parts. A 1×4 picket is not interchangeable with a 1×6, and forcing the swap looks wrong and fails early.

When it comes to OEM versus aftermarket, our rule in Ventura is simple: for structural rails, posts, and gate frames, go OEM or exact-match. The tolerances on CWS gate hardware are tight, and a knock-off hinge that’s off by an eighth of an inch turns a smooth gate into one that binds every time the temperature shifts. For pickets and trim, a quality aftermarket board from a local Ventura lumber yard often beats the OEM on price and holds up just as well, as long as it’s the same species and dried properly.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Fence Installation Is Failing

  • Posts leaning or twisting. The concrete footer was too shallow for the post height, or water has been sitting at the base. In Ventura’s marine layer zones, we see this most often along back fences that never get direct sun, so the soil stays damp year-round.
  • Pickets cupping, splitting, or falling off. This is a fastener problem. Nails back out as the wood swells and shrinks through Ventura’s wet-dry cycles, and once the bottom nail lets go, the picket warps and pops off the rail.
  • Rails sagging between posts. Usually a span issue, or too-small rails for the span. CWS wood sections need a 2×4 rail at minimum, and any span over 6 feet really should have a mid-rail or a thicker top rail.
  • Gate dragging or refusing to latch. The post has moved, or the hinge screws have eaten themselves loose. Forcing the gate only tears the hinge out of the post, which turns a $40 repair into a post replacement.
  • Bottom of pickets rotting through. Wood sitting in wet soil or too close to sprinkler heads. In Ventura, this shows up fastest on the north side of a fence, where the morning marine layer and shade from the house keep the base wet for hours.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled primary bathroom with a soaking tub and walk-in shower

Here’s how CWS fence installation costs shake out in Ventura:

  • Full CWS wood fence installation: $3,500 – $9,000 depending on linear feet, post spacing, gate count, and soil conditions.
  • Partial section replacement (1 – 3 panels): $1,200 – $3,800 including post reset and new pickets where needed.
  • Post replacement: $200 – $450 per post including concrete removal and new footer, with variables for soil type and access.
  • Gate replacement with CWS-compatible hardware: $450 – $1,100 per gate, including frame, hinges, and latch.

Every price we give in Ventura is written before we touch a tool, and it includes removal of the old section, haul-away of debris, concrete for post footers, all hardware, and a workmanship warranty. No change orders on material cost once we’ve looked at the job. If a post is set and the gate still binds three months later, that’s covered under the Done Right Promise.

DIY or Call Us?

You can absolutely reset a sagging gate hinge or replace a few loose pickets yourself if you have a level, a drill, and an afternoon. What you shouldn’t DIY is anything involving a post set in concrete, especially on a slope or in clay-heavy Ventura soil. A snapped post under tension from a heavy gate can take a fence section down hard. The same goes for removing a concrete footer with a fence still attached to it.

For most Ventura homeowners, the time cost is the deciding factor. A three-panel repair takes us a day. The same job on a weekend with one trip to the hardware store and one trip back for the right post mix usually burns two weekends. If you’d rather skip the guessing, call us at (831) 604-3426 and we’ll price the section, tell you exactly what we’re matching, and schedule it.

FAQs

A single-story rear room addition with tall windows and a new patio

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch