A Sawyer company - serving Ventura, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Mr-Glass Kitchen Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
A freestanding soaking tub in a remodeled primary bathroom
A whole-home remodel with the living, dining and kitchen areas opened up
A second-story addition that matches the existing roofline
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Kitchen Remodeling: The Ventura Owner’s Guide

If you have a Mr-Glass kitchen and something’s failed, we can match the part, price it honestly, and install it usually within a week of your call. A full Mr-Glass kitchen remodel in Ventura runs $14,000 – $45,000 depending on footprint, material grade, and how much of the original cabinetry shell is salvageable. Most owners discover a problem the same way: a drawer that suddenly drags, a cabinet door that won’t stay closed, or a glass panel that’s fogged between the panes and won’t clear. That’s the part telling you it’s done.

Call (831) 604-3426

We’re Sawyer Remodel Ventura, an independent contractor in Ventura. We’re not affiliated with Mr-Glass. We stock and source Mr-Glass-specific replacement components and install them with the same written-price process we use on every job.

Which Mr-Glass Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Mr-Glass kitchen products span three categories we see most often in Ventura: frameless glass cabinet doors, aluminum-framed glass doors, and full glass-front cabinet systems. The compatibility gotcha is the hinge bore. Mr-Glass frameless doors typically use a 35mm cup bore on European-style concealed hinges, but the aluminum-framed series varies between 26mm and 35mm depending on the year. If you grab the wrong hinge plate, the door either won’t sit flush or won’t close at all. We measure before we order anything.

Identifying your part starts with the hinge or slide label. Older Mr-Glass units in Ventura often have a small etched code on the hinge arm: MRG, MRG-A, or MRG-T. If that label’s worn off, we measure the door overlay and the bore spacing. For glass panels, edge thickness matters more than most owners expect. Mr-Glass frameless doors typically use 5/16-inch tempered glass. Some custom Ventura jobs use 3/8-inch, and you can’t swap one for the other without changing the hinge geometry. For aftermarket equivalents, Blum and Salice hinges are both solid matches for the 35mm Mr-Glass bore. For glass panels, the aftermarket route is only worth it on non-tempered applications, and we generally recommend OEM-grade tempering because it’s a safety item, not a style item.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Kitchen Remodeling Is Failing

  • Fogged glass between panes. Insulated glass units in older Mr-Glass cabinets lose their seal over time, especially in Ventura’s coastal air. Once moisture gets in, the panel is done. You replace the sealed unit, not the frame.
  • Hinge drift or sagging doors. The spring inside a concealed hinge fails gradually. If one door sits 1/8-inch lower than its neighbor no matter how many times you adjust the screw, the hinge is past saving.
  • Soft-close no longer working. Mr-Glass soft-close mechanisms are small hydraulic dampers mounted in the hinge cup or the drawer slide. Once they go stiff or stop damping, they’re a replaceable wear item, not a cabinet problem.
  • Drawer slides that catch or grind. Ball-bearing slides in Mr-Glass bases fail after years of salt air and daily use. If one side of the drawer runs smooth and the other binds, a bearing cage is shot.
  • Aluminum frame corrosion or pitting. In Ventura, the marine layer does real work on aluminum. Pitting around the bottom rail or the hinge plate usually means the frame is compromised and a partial replacement is smarter than a full cabinet swap.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Scope Typical Ventura Installed Price
Full Mr-Glass kitchen remodel $14,000 – $45,000
Small kitchen remodel (Mr-Glass cabinetry) $9,000 – $20,000
Cabinet installation (Mr-Glass or compatible) $4,000 – $13,000
Countertop installation $2,000 – $6,500
Glass panel replacement (per panel) $150 – $600
Hinge and hardware replacement (full kitchen) $400 – $1,600

What drives the range in Ventura is mostly material grade and how much of the existing structure you keep. If your Mr-Glass frames are solid and it’s a hardware and panel swap, you’re toward the low end. If the boxes are compromised and we’re rebuilding, the number climbs. Every quote is a written line-item price before any work starts. Our Done Right Promise applies to the whole job: if something we did fails within a year, we fix it. No argument, no re-quote.

DIY or Call Us?

You can safely handle a few things yourself. Cleaning the hinge cups, tightening a loose mounting screw, checking whether a drawer slide has debris in the track. That’s fine. Where DIY goes wrong is swapping hinges on a frameless glass door or replacing a tempered glass panel. The glass is under edge stress, the hinge geometry matters in millimeters, and a dropped panel means a shattered hazard in your kitchen. It’s not worth the ER trip or the second trip to buy the right part. If you’re comfortable with the small stuff, do it. For the rest, call us at (831) 604-3426 and we’ll match the part, quote the job, and show up when we say we will.

FAQs

A remodeled living room with built-in shelves around the fireplace

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch