







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Driveway & Pavers: The Ventura Owner’s Guide
If you’ve got a cracked, sunken, or shifting Ameristar paver driveway in Ventura, we can match the exact paver profile or replacement part, quote a written price, and have it installed by a uniformed crew with a one-year guarantee behind the work. Typical Ameristar paver repair and replacement in Ventura runs $700 to $6,500 depending on square footage and whether the base layer needs rebuilding. Most owners discover the failure the same way: a walkway paver that’s tilted after rain, a section of the driveway that dips near the garage apron, or edge pavers that have moved and left a gap.
We carry Ameristar-compatible pavers and edge restraints on hand for common profiles, and we can source the rest from our local Ventura supplier in a day or two. We’re an independent contractor, not an Ameristar factory outlet. That means we price honestly and install to the conditions of your specific driveway, not a catalog guess.
Which Ameristar Models This Applies To

Ameristar makes four paver lines we see on Ventura driveways: the Classic series (flat-top, square-edge, 60mm thickness), the Highland series (tumbled edges, 60mm), the Colonial series (rectangular, comes in 45mm and 60mm), and the Perma-Edge border block (a tapered restraint that locks the field pavers in place). The profile and thickness are everything. A 45mm paver from the Colonial line will not sit flush next to a 60mm drive field without a visible lip, and it’s the first thing to crack under a car axle.
How to identify yours: pull one paver from an edge, clean the bottom, and look for a stamped code beginning with “AM-” followed by the series code (CL, HL, CO, or PE). If the stamp has worn off, measure the thickness with a tape in millimeters. That measurement tells us more than the color ever will. On the OEM-versus-aftermarket question: Ameristar’s factory pavers are consistent in color from lot to lot, which matters if you’re replacing a single strip and don’t want a two-tone driveway. Quality aftermarket matches from Ventura suppliers are fine for full-section replacements, but mixed-lot color variation is a real thing in our coastal sun, so we’ll always show you a sample against your existing field before we commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Driveway & Pavers Are Failing
- Pavers that rock when you step on them. The sand bedding underneath has washed out, usually at the low point of the drive where Ventura’s winter rain pools before it drains.
- A sagging dip near the garage apron. This is a base failure, not just a paver problem. The crushed rock sub-base has settled, and the fix means pulling the section, re-compacting, and re-laying, not just adding sand.
- Edge pavers pulling away from the curb or lawn line. The edge restraint has failed or was never installed correctly. Water gets in, and with Ventura’s clay-heavy soil in the hills, it moves fast once the edge lets go.
- Cracks that run in a straight line across multiple pavers. That’s a load stress crack, usually from repeated parking in the same spot. Individual pavers crack on top; base failure cracks through patterns.
- A haze of efflorescence or a paver that’s turned lighter than its neighbors. Surface salts have wicked up, or the paver’s UV coating is gone from age. In Ventura’s direct coastal sun, unsealed pavers lose color faster than you’d think.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Small Ameristar paver repairs in Ventura, like a ten-square-foot edge section, usually run $700 to $2,000 installed. A partial driveway re-level with base re-compaction runs $2,500 to $4,500. Full paver driveway removal and re-installation on a failing base is $7,000 to $18,000, which lines up with a brand-new paver driveway install because that’s effectively what it is. The variables that move the price: access for a plate compactor, how much of the base is clay versus good rock, and whether we’re matching an existing Ameristar profile or switching the whole field.
Every quote is a written line-item price before we start, matching the Relay Standard Luca’s crew has run on since day one. You’ll know the paver cost, the base cost, the labor, and the haul-away, separately. No change orders unless you ask us to expand the scope. And the Done Right Promise covers the work, in writing, for a full year.
DIY or Call Us?
You can safely handle one thing: sweeping new polymeric sand into joints between pavers that are still level but have lost their grip. That’s a maintenance fix, not a repair. Everything beyond that gets physically demanding fast. Pulling pavers means lifting them without chipping the edges. Re-compacting a base means running a plate compactor without making the existing edge worse. And if you’ve got a sagged section, the fix is never “add more sand under the paver.” Sand doesn’t build structure; it just fills the gap until the next rain. If you’d rather spend a Saturday doing something else, call (831) 604-3426 and we’ll bring a written quote and a straight answer.
FAQs

Ameristar pavers on a well-built base typically last 25 to 40 years in Ventura’s climate, with the pavers themselves outlasting the sand joints and sometimes the base. Coastal sun fades unsealed color faster than inland, and winter rain is the bigger threat to the base than anything else. Call (831) 604-3426 for a free assessment of your specific driveway.
An individual cracked paver is replaced, not repaired. Concrete pavers don’t glue back together under car weight. If the crack is from a base failure, replacing the paver alone just cracks the next one. We’ll tell you which situation you’ve got before quoting anything.
A typical edge repair or small section replacement in Ventura takes one day from paver removal to re-compaction to final sand sweep. A full driveway re-base is three to five days depending on access and weather. We’ll give you a real schedule in writing before we start, not a vague “soon.”
We stock common Ameristar Classic and Highland profiles and the Perma-Edge border block on hand for a fast match when we arrive. Anything else we source from our Ventura supplier, usually within one to two business days. Call (831) 604-3426 with your paver’s thickness and we’ll tell you before we set a timeline.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


