







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Ventura Owner’s Guide
We stock and install ActiveYards-compatible driveway and paver components throughout Ventura, with most paver driveway repairs running $250 to $700 for sealing or localized fixes and full paver driveway installation landing between $7,000 and $18,000 depending on square footage. Most owners figure out something’s wrong the same way: a paver sinks after the first big rain, a border row starts drifting toward the curb, or a section of the driveway develops a low spot that holds water for two days after a storm. The good news is that ActiveYards pavers are modular by design, which means a failed section usually doesn’t require tearing out the whole driveway.
Sawyer Remodel Ventura is an independent service provider, not affiliated with ActiveYards. We carry compatible parts and install them the same way we’d handle any paver job in Ventura: a written price before any work starts, uniformed technicians who show up on time, and a Done Right Promise backing the work.
Which ActiveYards Models This Applies To

ActiveYards builds their paver and driveway systems around a modular grid, which means most of what we see in Ventura falls into two buckets: the Classic Series pavers (standard 4″ x 8″ and 6″ x 9″ profiles) and the Permeable Series pavers, which are thicker and designed to let water drain through the joints. If you have an ActiveYards driveway, the quickest way to identify your exact paver is to flip one that’s already loose and look underneath. The mold number is stamped on the underside, and that number is what we match when you call.
Here’s the compatibility gotcha most people run into: ActiveYards changed the locking-lip profile on their border pavers about six years ago. If your driveway was installed before that change and you’re trying to match a border row, the old-profile paver won’t seat flush against a new-profile neighbor. It’s the kind of thing that looks right in a catalog photo and fights you on the ground. We keep both profiles on hand because we’ve made that mistake exactly once and don’t plan to make it again.
For OEM versus aftermarket: ActiveYards OEM pavers are color-matched at the factory, which matters more than you’d think when the sun has been hitting a Ventura driveway for eight years. An aftermarket paver from a generic supplier will be close in size but never exactly right in color, and that patch job will stare at you every time you pull in. We stock OEM-profile ActiveYards-compatible pavers for this reason, and we’ll tell you straight if a color-match is close enough or if you should consider redoing the section.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Driveway & Pavers Is Failing
- Sinking or low spots after rain. This is almost always a base-prep issue below the pavers, not the pavers themselves. In Ventura, we see it most in driveways built on the old clay-heavy soils near Midtown, where water moves the ground every winter.
- Border rows drifting or opening up. The edge restraint on an ActiveYards driveway is either a plastic or aluminum edge that pins the border pavers. When it lets go, the whole border row starts leaning outward, and you’ll see a visible gap along the concrete curb or lawn line.
- Weeds or sand pushing up through the joints. The joint sand in a paver system is the first thing to wear out. Once the sand is gone, weeds find the gap and the pavers start shifting against each other, which leads to chipped edges.
- Holding water for more than a few hours. Permeable paver systems are supposed to drain, and a Ventura driveway that ponds water after a light rain is telling you the base has compacted or the joint fill is clogged. That standing water is also exactly what invites more settlement.
- Chipped or cracked pavers in one concentrated area. A single cracked paver is a replacement. A cluster of them is a base problem, and replacing the pavers without fixing the base is like painting over dry rot.
Replacement Cost & What’s Included

For Ventura specifically, here’s what you should expect to pay. A localized paver repair, where we pull a small section and reset it on fresh base, runs $250 to $700 depending on how many pavers come up and what we find underneath. A full paver driveway installation in Ventura typically runs $7,000 to $18,000, and the range mostly comes down to square footage, whether we’re reusing existing base or rebuilding it, and whether you want a simple field pattern or something with a border and accent rows.
| Service | Ventura Price Range |
|---|---|
| Driveway sealing (paver joint re-sand & seal) | $250 – $700 |
| Localized paver repair / reset | $250 – $700 |
| Paver driveway installation (new) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement (full tear-out & rebuild) | $5,000 – $14,000 |
Every ActiveYards-compatible repair we do in Ventura includes the parts, the labor, the joint sand, and the edge restraint if we’re touching the border. You get a written line-item price before any work starts, and the number you approve is the number on the invoice. That’s the Relay Visibility Guarantee, and it’s how we’ve run every job.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Paver work is one of the few driveway repairs where a homeowner can do real, lasting good work with a rubber mallet and some patience. If you have a single sunken paver near the house and the base underneath is still solid, you can pull it, add a skim of sand, and reset it in an afternoon. What you shouldn’t do is try to fix a failing base, a moving border row, or anything involving more than a few pavers. Once you’re lifting a section, you need to know what the base layer is doing, and Ventura’s clay-heavy soils mean guessing wrong just puts the problem back in the driveway a year later.
If you’d rather have it done once and not think about it again, call Luca and the crew at (831) 604-3426. We’ll come out, tell you what’s actually happening under the pavers, and put the price in writing before we lift a single stone.
FAQs

With proper base prep and occasional joint sand replacement, an ActiveYards paver driveway in Ventura should last 25 to 40 years. The pavers themselves rarely fail; it’s the base and edge restraint that need TLC. Call (831) 604-3426 if your driveway is showing age, and we’ll give you a straight assessment, no charge for the visit.
Yes, in most cases a sunken section can be pulled, re-leveled, and reset on new base without replacing the whole driveway. The cutoff is usually whether the base failure runs across more than a third of the surface. Call (831) 604-3426 for an exact quote, and we’ll tell you which side of that line you’re on.
A localized repair on an ActiveYards driveway in Ventura usually takes one day, including pulling the section, re-compacting the base, and resetting the pavers. A full driveway installation runs three to five days depending on size and weather. Either way, you’ll have a start date and a real arrival time before we begin, because that’s how every Sawyer Remodel Ventura job runs.
We keep the most common ActiveYards Classic and Permeable profiles in stock at our Ventura shop alongside parts from KraftMaid, Cambria, and Silestone for the remodels we do. If we don’t have your exact mold number, we’ll source it and tell you the lead time before you commit to anything.
Call Sawyer Remodel Ventura for ActiveYards Driveway & Pavers Work
If your ActiveYards driveway in Ventura is sinking, shifting, or just looking tired, call (831) 604-3426 for a free estimate. The work says it. We just show up and cut straight.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


