







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Home Additions & ADU: The Ventura Owner’s Guide
If your ActiveYards addition or ADU has a failing component, we stock and install compatible parts across Ventura, with full home addition projects typically running $45,000 – $130,000 installed. Most owners discover the issue the same way: a door that no longer seals, a window that fogs between the panes, or a roofline seam that’s started leaking after a few coastal winters. The good news is that most ActiveYards-compatible failures are repairable without tearing the whole structure down. Call (831) 604-3426 and we’ll tell you over the phone whether it’s a parts swap or a bigger conversation.
Key takeaways:
- ActiveYards additions and ADUs use modular framing systems, so most component failures can be matched and replaced without structural work.
- Typical repair parts for these structures run from a few hundred dollars up to several thousand, depending on whether it’s hardware, glazing, or a structural tie-in.
- We are an independent Ventura contractor, not affiliated with ActiveYards, and we work on their systems regularly.
- Written price before work starts, every time. No surprises at the end.
Which ActiveYards Models This Applies To

ActiveYards builds modular and panelized structures under a few different product lines, and the part you need depends on which generation you have. The most common units we service in Ventura are their prefab accessory structures and ADU shells that use aluminum framing connectors and proprietary corner brackets. If your unit was built after roughly 2015, you likely have the newer clip-and-lock panel system, which uses a different wall-channel profile than the older screw-fastened frames. That matters because the two are not interchangeable: a corner post from the older series will not seat into a newer channel, and forcing it is how you end up with a misaligned roofline and a voided warranty.
To identify what you need, look for a stamped label on the interior side of any corner post or on the bottom track near the threshold. ActiveYards labels their structural members with a series code and a length spec in inches. Measure the channel width with a tape, not a guess: most residential units are either 2-3/8″ or 3-1/4″ channel, and the difference is invisible to the eye. For anything structural, OEM is the right call. For easily swapped items like weatherstripping, threshold caps, or screen track, quality aftermarket equivalents from brands like KraftMaid or Silestone hardware lines (both of which we carry) work fine and often cost less.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Home Additions & ADU Is Failing
- Door binds at the top corner or won’t latch: Almost always a sagging header or a shifted corner bracket. In Ventura’s clay-heavy soil, minor foundation settling is routine, and even a quarter-inch of movement will throw a modular frame out of square.
- Visible daylight through a wall seam or corner joint: This means the panel gasket has compressed or torn, and moisture is getting in. Left alone through one rainy season, you’ll be looking at mold inside the wall cavity.
- Fog or condensation between window panes: The insulated glazing unit has failed. It’s a straight swap, but ActiveYards units often use custom-sized panes, so a stock big-box window won’t fit.
- Soft spot in the floor near the entry: Water intrusion through a worn threshold or failed door sweep. The floor decking under a modular unit is typically OSB, and once it delaminates, the repair area grows fast.
- Roofline dip or visible sag at the ridge: Either a failed connector plate or an undersized beam for the span. We see this on older units where the original install skipped a prescribed tie-down or hurricane clip, which Ventura County code now requires on all ADU structures.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a full ActiveYards-compatible home addition in Ventura, plan on $45,000 – $130,000 depending on square footage, site prep, and whether you’re tying into existing utilities or running new lines. An ADU conversion or build runs $90,000 – $220,000 for a livable unit with a kitchen and bath. If you’re only replacing a failed component, like a door assembly, a window unit, or a corner bracket, you’re usually looking at $400 – $2,500 installed. What drives the spread is access, structural inspection, and whether we need to pull a permit. Parts and labor are always separated on your written quote, so you see exactly what the component costs and exactly what our time costs. Every repair carries our Done Right Promise: if it fails within a year, we come back and make it right. No argument, no charge.
Here’s the pricing you can expect in Ventura:
- Door assembly replacement: $800 – $2,500 installed
- Window glazing unit replacement: $600 – $1,800 per unit
- Corner bracket or connector repair: $400 – $1,200 depending on access
- Threshold and weather seal replacement: $250 – $600
- Full addition or ADU build: $45,000 – $220,000 depending on scope
DIY or Call Us?
You can safely check a few things yourself: look for a visible stamp on the corner post, measure the channel width, and inspect the weatherstripping for tears. That’ll help you describe the problem over the phone. What you shouldn’t DIY is anything structural: corner brackets, header connections, or any repair that involves lifting or shoring a wall. These modular frames are under load even sitting still, and pulling a connector without bracing the panel is how people get hurt. The crew have been doing this work, and we’d rather spend 20 minutes on the phone telling you it’s a simple fix than spend an afternoon undoing a well-intentioned mistake. Call (831) 604-3426 and we’ll walk you through what you’re looking at.
FAQs

Most ActiveYards structural components carry a 10-15 year expected lifespan in Ventura’s coastal climate, but the real wear items are seals, glazing, and hardware, which typically need replacement every 5-8 years. Salt air and afternoon marine layer moisture accelerate gasket compression and aluminum corrosion, especially on units within a mile or two of the coast. A well-maintained unit on the east side of Ventura will outlast an identical one on Beachmont by several years. Call (831) 604-3426 for an exact assessment of your unit.
Sometimes, yes. Weatherstripping, threshold caps, and minor hardware can usually be repaired or re-seated. Structural components like corner brackets and header connectors are replace-only: once the aluminum is stressed or cracked, field repair isn’t safe or code-compliant. We’ll tell you straight which bucket your issue falls into. Estimates are free.
Most component replacements, like a door assembly or window glazing unit, take 2-4 hours on site once the part is in hand. Structural repairs involving shoring, bracket replacement, and re-plumbing the frame typically take 1-2 days, including inspection. We confirm a live arrival time before we show up, and you get photo updates when the work is done.
We keep the most common ActiveYards-compatible fast-fail items on hand: weather seals, threshold caps, screen tracks, and standard door hardware. Custom-sized glazing units and structural channel stock are ordered to spec and usually arrive within 3-5 business days. If we don’t have it on hand, we’ll give you an honest timeline, not a vague “soon.” Call (831) 604-3426 for a free estimate.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


