







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Fence Installation: The Ventura Owner’s Guide
Unilock fence installation in Ventura typically runs $3,500 to $9,000 for a complete fence using Unilock posts, panels, and caps, with most residential jobs landing between $4,500 and $6,500. We stock Unilock-compatible fence components on hand and can usually start within a few days once we verify your existing layout. The way most Ventura homeowners discover they need this work: a post wobbles after a winter storm, a panel cracks at the seam, or the fence has shifted so much the gate won’t latch anymore. Unilock fences are engineered as a system, and when one component fails, it’s rarely isolated. The good news is that the modular design means we usually don’t have to tear out the whole run, just the section that gave out.
We’re an independent Ventura contractor, not affiliated with Unilock, but we’ve been installing and repairing their fence systems long enough to know which parts fail, why, and what it costs to make it right. The local pro work these fences throughout the city and we’ve seen how coastal moisture and shifting soil in neighborhoods like Midtown and the Avenue punish a fence that wasn’t set right the first time.
Which Unilock Models This Applies To

Unilock fences aren’t one product. They break down into a few distinct lines, and getting the right part means knowing which one you’re standing next to. The main categories are Unilock’s modular precast concrete fence systems, typically sold in 6-foot and 8-foot sections with post-and-panel configurations. Within that, you’ll see different finished textures: smooth face, stone finish, and the Estate line that mimics dry-stacked ledgestone. The compatibility gotcha most homeowners hit: Unilock fence posts have different internal channel widths depending on the panel thickness. A post meant for a 2-inch panel won’t accept a 3-inch panel cleanly, and forcing it is how you get panels that crack at the corners within a year.
We always recommend OEM Unilock components when the fence is less than 10 years old and the color match matters. Concrete cures and weathers, and an aftermarket cap that’s slightly lighter or darker will show. That said, for interior posts or sections hidden by landscaping, quality aftermarket equivalents from Ventura-area masonry suppliers can save real money without compromising the structure. We’ll give you both options with numbers attached, and you decide.
If you want to identify the exact part before calling, look for the manufacturer stamp on the underside of a cap or the back of a panel near the seam. Unilock stamps are small but legible, usually a logo plus a series number. Take a photo of it. It saves a trip back to the supplier and gets your quote accurate on the first call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Fence Installation Is Failing
- Post lean or wobble that wasn’t there last year. In Ventura, this usually means the footing was poured too shallow or the post base has been undermined by drainage. It’s not the post failing, it’s what’s under it.
- Cracks running vertically through a panel. Concrete panels expand and contract with the temperature swings between Ventura’s marine layer mornings and hot afternoon sun. If the installer didn’t leave expansion tolerance at the post channel, the panel cracks at the stress point, almost always at the lower third where it’s seated.
- Gate sag or a latch that no longer lines up. The gate post was either set without enough embedment or the hinge fasteners have worked loose in the concrete. Left alone, a sagging gate turns into a cracked post and then a full section replacement.
- Efflorescence or spalling at the panel base. That white chalky residue is salt and mineral wicking up from groundwater, common near the beach and in areas with heavy irrigation. It’s cosmetic at first, but over time it eats the concrete’s surface and weakens the panel edge.
- Cap pieces sliding or missing. Caps are usually adhered, and the adhesive fails before the concrete does. A missing cap isn’t just a finish issue, it lets water into the post core, and that’s how a post splits from the inside out.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Full Unilock fence installation in Ventura runs $3,500 to $9,000 depending on linear footage, post count, access, and whether we’re removing an old fence or starting fresh. A partial repair, say one post and two panels with new caps, usually comes in between $800 and $1,800. We write every quote as a line-item price you see before any work starts. That’s the Sawyer Remodel Ventura way: you approve a number, and that’s the number on the final invoice.
What’s included in that price: material (OEM or approved aftermarket per your choice), concrete and rebar for footing work, removal and disposal of the failed section, post setting with proper embedment depth for Ventura soil, panel seating with correct expansion tolerance, cap installation, and cleanup. Every job carries our Done Right Promise in writing. If the fence isn’t right, we come back and make it right, no argument.
Cost drivers for this work in Ventura specifically: access to the fence line (a back fence off an alley in Midtown runs less labor than one behind a hillside home with no truck access), existing footing condition, and whether your original install was done to code. We’ve repaired fences installed by others where the posts were set 12 inches deep. Ventura code and common sense both call for deeper, especially with our clay-heavy soil that swells in winter.
DIY or Call Us?
Precast concrete fence sections are heavy. A single panel can run 180 to 250 pounds, and a post is another 100-plus. This isn’t a weekend project with a friend and a six-pack unless you own a skid steer or have a crew of four with strong backs and good insurance. The safety hazard is real: panels tip, crush toes, wreck vehicles, and take down neighboring fence sections when they go. We’ve also seen DIYers set posts in the wrong orientation so the panel channels face the wrong way, then they’re stuck with a fence that can’t be assembled without breaking concrete.
What you can safely do: identify the part using the stamp, measure your post spacing so you know if you’re on a 6-foot or 8-foot module, and clear vegetation around the failed section so we can get to it. Past that, let a crew that does this every week handle the lifting. Call (831) 604-3426 and we’ll have someone out to look, with a number in your hand before any tools come off the truck.
FAQs

A properly installed Unilock fence in Ventura should last 25 to 30 years as a structure, though caps and surface finish may need attention around the 12 to 15 year mark. Coastal exposure in areas near the 101 or within a mile of the beach accelerates surface wear, so fences west of downtown usually show their age faster than those in the foothills. Call (831) 604-3426 for an honest assessment of what’s cosmetic and what’s structural.
Hairline cracks can sometimes be sealed and stabilized, but if a panel is cracked through, repair is a temporary fix. The panel is already compromised and will keep moving with temperature swings. Replacing the failed section is usually the same cost as repeated patch work within two years. We’ll show you the crack, explain what we’re seeing, and let you decide with real numbers.
A typical partial repair, one or two posts and panels, takes one day on site. A full fence replacement runs 2 to 4 days depending on footage and access. We’ll schedule the start, show up when we say we’ll be there, and you’ll get photo updates before and after, so you’re not standing in the yard wondering what happened.
We stock the common post sizes, panel profiles, and cap styles on hand, and we can source OEM Unilock components through Ventura masonry suppliers in a day or two for anything unusual. Give us the stamp number or a photo before the visit and there’s a good chance the part is on hand when we pull up. Call (831) 604-3426 and text us a picture, it speeds everything up.
No. The price we put in writing is the price you pay. The only exception is if we open up the footing and find something structural that was invisible from the surface, like a broken irrigation line or a rotted retaining wall behind the fence. In that case, we stop, show you what we found, and give you a written number for the extra scope before we touch it. That’s the whole point of a written price before work starts: no surprises on either side.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


