







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Ventura Owner’s Guide
If you have a Tremron kitchen and something’s failed, we can match the part and install it. A full Tremron kitchen remodel in Ventura runs $14,000 to $45,000 depending on scope, cabinet line, and countertop material. Most owners find us after a hinge breaks, a drawer slide grinds to a halt, a cabinet box pulls loose from the wall, or a countertop seam opens up. We stock common Tremron-spec hardware on hand, and if it’s a cabinet or countertop replacement, we order direct and schedule the install in one visit.
Which Tremron Models This Applies To

Tremron kitchens are best known for exterior hardscapes, but the indoor cabinet and counter lines share the same manufacturing discipline: modular boxes, standardized hardware, and finish specs that favor durability over ornamentation. Most Tremron kitchen components in Ventura fall into two groups. The first is framed cabinetry with face-frame construction, typically 3/4-inch plywood boxes and soft-close hardware. The second is frameless or European-style boxes with 3/4-inch melamine or plywood, full-overlay doors, and integrated hinge systems.
Here’s the compatibility gotcha that catches people: Tremron uses both 35mm cup hinges and a smaller 26mm cup on certain drawer-front applications. If you buy hardware before you measure, you will be wrong about half the time. Open a door and look for a stamped code on the hinge plate. If there’s no stamp, the cup diameter is the tell. We keep both sizes on hand in Ventura. For aftermarket replacement, Blum and Salice make direct-fit equivalents for most Tremron hardware, and we’ve found them identical in operation at roughly 60 to 70 percent of the OEM price. If you want OEM, we order it. If you want it quiet and half the cost, we’ll show you the aftermarket part and let you pick.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Kitchen Remodeling Is Failing
- Cabinet door no longer closes flush or drifts open. The hinge spring has lost tension or one of the mounting screws stripped out of the box. In Ventura’s salt air near the coast, stamped hinge springs corrode faster than inland and fail in predictable fashion.
- Drawer slides scrape, stick, or drop on one side. The ball-bearing carriage inside the slide has worn flat, or the nylon wheel on an older Tremron epoxy slide has cracked. Once one side fails, the other side follows within weeks because the drawer is now racked.
- Cabinet box pulls away from the wall. This is a mounting failure, not a cabinet failure. We see it most in Midtown and downtown Ventura homes where the original install used drywall anchors instead of hitting studs, and two decades of loading finally won.
- Countertop seam opens or laminate bubbles at the edge. Water has worked into the seam or the substrate. It’s a slow failure that starts as a hairline gap and becomes a lift you can catch with a fingernail.
- Soft-close no longer soft-closes. The piston inside the hinge or slide has leaked its damping fluid. Some are serviceable. Most are a five-minute swap with the right part in hand.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a repair call in Ventura, most Tremron hardware replacements land between $180 and $650 with the part included, and the work is done same-day. For a full remodel, you’re looking at $14,000 to $45,000 with the biggest swings coming from cabinet count, countertop material, and whether you’re changing the footprint. Here’s the breakdown:
- Tremron cabinet installation: $4,000 – $13,000
- Countertop replacement: $2,000 – $6,500
- Backsplash install: $800 – $2,500
- Full Tremron-compatible kitchen remodel: $14,000 – $45,000
Every number above is a written price before work starts. You approve the line item, you get the line item on the invoice. If the labor is ours, it’s covered by the Done Right Promise. If the part is OEM, the manufacturer warranty applies on top of that.
DIY or Call Us?
A hinge or drawer slide swap is easy money if you’ve done it once and you have the right cup size. But here’s the thing we tell every Tremron owner in Ventura: cabinet boxes pulling from the wall is not a two-screw fix, and a failed countertop seam is never just the seam. It’s water, substrate movement, or a bad install underneath. Get the wrong hinge and you’ll drill more holes in a cabinet door than it has, and now the veneer is blown out behind the screw holes. If you want to confirm the part number or the cup size before you buy anything, call (831) 604-3426 and we’ll help you ID it over the phone. If you’d rather not touch it, the truck’s already in Ventura most days. The work says it. We just show up and cut straight.
FAQs

In Ventura, expect 15 to 20 years from Tremron cabinetry, with hardware failing in two waves: hinges and slides at the 8-to-12-year mark and box joints at the 15-to-20-year mark. Coastal air shortens the hardware window. Inland, you might get a few extra years out of the hinges. Call (831) 604-3426 and we’ll assess what you have before you spend on anything.
Yes for drawer slides, soft-close pistons, and stripped hinge plates. No for cracked hinge cups, through-bore door holes, or separated face frames. We’ll tell you which one you have and what the repair costs, as a written number, before any work starts.
Most hardware replacements are done in one visit, usually one to two hours. Cabinet and countertop replacements take one to two days once the parts arrive. The order time for OEM Tremron parts is typically five to ten business days in Ventura.
We keep common Tremron-spec hinges, slides, soft-close pistons, and mounting hardware on hand for same-day calls. For cabinet boxes, doors, and countertop runs, we order to spec and install when it arrives. We also stock compatible hardware lines for KraftMaid, Cambria, and Silestone kitchens. Call (831) 604-3426 for a free estimate.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


