







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Ventura Owner’s Guide
If you have a Tremron surface in your bathroom that’s failed or is failing, we stock and install Tremron-compatible replacement materials throughout Ventura, with most bathroom remodels running between $9,000 and $28,000 installed. We can typically get eyes on your bathroom within a day or two of your call and give you a written price before any work starts. Most Ventura homeowners discover the problem the same way: a hairline crack near the drain, a slowly spreading stain that won’t scrub out, or a corner that’s started to lift and catch water.
We’re Sawyer Remodel Ventura, an independent remodeling contractor. We’re not affiliated with Tremron, but we work with their products often enough to know exactly what holds up in coastal air and what doesn’t.
Which Tremron Models This Applies To

Tremron’s product line is broad, but in bathrooms we mostly see two situations. The first is a Tremron shower pan or basin, typically their solid-surface or composite lines sold through regional supply houses in California. The second is Tremron concrete or pavers used as an accent in a bathroom, usually a floor detail or a curb face. The failure mode is different for each, and so is the fix.
Here’s the compatibility gotcha most owners don’t know: Tremron shower pans are cast with specific drain rough-in dimensions, and swapping a pan for a different brand usually means moving the drain. If your subfloor is slab-on-grade, that’s real demolition. Matching the exact Tremron model keeps the repair surgical. So before you order anything online, pull the grate and look for the stamp on the underside of the pan. If it’s faded, take three measurements: the pan footprint, the drain center-to-wall distance, and the lip height. With those three numbers, we can tell you on the first call whether it’s a direct match or a custom rip-out.
For composite pans, OEM replacements are worth the cost. Aftermarket universal pans exist, and some are fine, but the lip profiles rarely match existing tile lines without visible shimming. For Tremron pavers used inside, we’ll match the profile and color as closely as current production allows, but we’ll be honest: if the original sat in your bathroom for fifteen years, the new paver will read slightly different until it weathers in. Nobody can fix that, not even Tremron. We’d rather tell you now than surprise you at install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Bathroom Remodeling Is Failing
- Hairline cracking radiating from the drain. This is the classic composite pan failure. The drain collar is the stiffest point in the assembly, and flex in the subfloor concentrates stress right there. Once a crack starts, water gets under the pan and the problem compounds fast.
- A stain that darkens over days, not weeks. Wicking along a micro-fracture pulls moisture under the finish. If the stain changes shape after a shower, water is moving through the pan body, not over it.
- Spongy spots underfoot. In Ventura’s older Midtown and Pierpont homes, we see subfloor rot beneath pans that looked fine from above. A soft spot means the waterproofing failed long before the visible damage.
- Musty odor that lingers after cleaning. Trapped moisture under a pan or behind a curb grows mold in the framing. You can scrub the surface all day; the smell comes back because the source is underneath.
- Grout lines that stay dark in one section. Persistent damp in a single grout line usually points to a failed seal or a cracked pan lip letting water run backward into the wall assembly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a full Tremron bathroom replacement in Ventura, plan on $9,000 to $28,000 installed. That range is wide because the job changes completely depending on what’s underneath. A straight pan swap with intact subfloor and tile that stays down lands at the lower end. A full tear-out with subfloor repair, new waterproofing, tile, and fixtures pushes toward the top.
Here’s what the range looks like in practice:
- Pan swap only (Tremron-matched pan, drain reconnect, silicone seating): $1,200 – $3,500
- Shower floor rebuild (pan, waterproofing, tile, new grate): $4,500 – $12,000
- Complete bathroom remodel (pan, walls, floor, vanity, fixtures, paint): $9,000 – $28,000
Every quote includes the written price before work starts, the parts, the labor, haul-away of the old material, and our Done Right Promise in writing. If it’s not done right, we make it right. No change orders mid-job, no surprise line items at the end.
DIY or Call Us?
A failed bathroom surface isn’t a spring under tension or live wiring, but it’s still a job where DIY goes wrong in ways you can’t see until the mold appears. You can safely check the obvious: confirm the crack is widening, mark the stain edge with painter’s tape to track it, and shut off water to the room if you see any sign of a leak. What you shouldn’t do is pry up a corner to look underneath. Once you break the pan-to-drain seal, you’ve turned a contained failure into an open one.
The honest split is this: if the pan cracked due to age and you’re replacing it before water has migrated, it’s a one-day job for us and a weekend of uncertainty for you. If the subfloor is involved, which we see more often than not in Ventura homes from the ’60s and ’70s, it’s a structural repair that needs waterproofing done in the correct sequence. The work says it. We just show up and cut straight. Call (831) 604-3426 and we’ll tell you which situation you have, free.
FAQs

In Ventura’s coastal climate, a composite Tremron pan should give you 15 to 25 years if the original install was done correctly. Pans installed over improperly spaced subfloor or with incorrect mortar bedding fail much earlier, sometimes within five to seven years. We’ve pulled pans in East Ventura that were cracked at year six with the manufacturer’s stamp still legible, which tells us it was an installation problem, not a material one.
Surface patches and epoxy fillers can buy you a few months, but they don’t restore the pan’s waterproof integrity. Once water has wicked through a crack, the only lasting fix is replacement. If the crack is cosmetic and bone-dry, a color-matched fill can hold, but we’ll tell you straight whether it’s worth the effort. Call (831) 604-3426 and text us a photo; we’ll give you an honest read before we ever schedule a visit.
A straight pan swap usually takes one day. A full shower rebuild runs three to five days. A complete bathroom remodel with the Tremron surface plus walls, floor, vanity, and fixtures runs two to three weeks depending on material lead times. We give you a written schedule with your written price, and we stick to both. The Relay Visibility Guarantee means live arrival times and photo updates before and after, so you’re never guessing.
We keep common drain assemblies, grates, and shim stock on hand, but the pan itself is ordered per job to match your exact model and footprint. Lead times from Tremron’s regional distributors run five to ten business days for current-production pans, and occasionally longer for discontinued sizes. We confirm availability and lead time before we take a deposit, and the written quote includes that wait. No vague “we’ll call you when it’s in.” You know the date.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


