







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Ventura Owner’s Guide
If you’re staring at a cracked Tremron roof tile or a failed underlayment section, here’s the short version: we stock Tremron-compatible roofing materials in Ventura, and most roof repairs run between $400 and $1,800 installed, depending on what actually failed. Roof replacement with Tremron-style concrete tile typically lands between $8,000 and $20,000 for a standard Ventura home. You’ll usually spot the problem after a heavy rain season or a Santa Ana wind event, when a tile shifts, a valley starts weeping, or you see water staining on the ceiling under a slope.
We’re an independent Ventura contractor, not a Tremron dealer, but we work with their tile profiles regularly. Concrete roof tile is a different animal than asphalt shingle, and Tremron’s interlocking profile has specific quirks worth knowing before you patch anything. The local pro have pulled enough broken Tremron tiles off Midtown and Eastside homes to know exactly what fails and why.
Which Tremron Models This Applies To

Tremron’s roofing line in California is dominated by their concrete tile profiles, most commonly the flat and low-profile interlocking styles you see across Ventura’s older tracts and newer coastal builds alike. The critical detail: Tremron tile uses a specific interlocking lug pattern, and not every “flat concrete tile” on the shelf will seat correctly. The lugs on the bottom edge have to match the batten spacing or the tile will rock, crack under foot traffic, and eventually leak at the overlap.
If you’re trying to match an existing roof, flip a broken tile over. The back will show a series code, typically stamped into the concrete, along with the profile name. Take a photo of that stamp before you call anyone. For Tremron specifically, the color blend matters more than most manufacturers because their Ventura-installed roofs have been UV-bleached by our marine layer and sun cycle for years. A factory-fresh tile in the “same” color will often read brighter than the surrounding field. We account for that by sourcing from multiple production lots and, where it matters, pulling from salvage tile that’s already weathered to match.
We also handle the underlayment, battens, flashing, and vent boots that Tremron tile sits on. The tile is rarely the only thing that failed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Roofing Is Failing
- Water staining on ceilings after rain. This is the one that gets you into the attic with a flashlight. With Tremron tile, the leak point is rarely directly above the stain, because water travels along the underlayment before it finds a seam or a nail hole to drop through.
- Broken or shifted tiles you can see from the ground. A cracked tile at the eave or a tile that’s slid out of its interlock is an open invitation for water to hit the underlayment directly. It’s also a sign that foot traffic, wind, or a failed batten caused movement.
- Granular sand collecting in gutters. Concrete tile sheds a fine surface grit as it ages, but accelerated granule loss means the tile’s protective surface has weathered through. On Ventura’s coastal side, salt air speeds this up on homes within a mile or so of the water.
- Valley flashing rusting or lifting. The metal valley where two roof planes meet takes more water volume than any other point on the roof. When that metal corrodes or the sealant dries out, water gets under the tile field.
- Musty smell in the attic after extended damp weather. That’s trapped moisture, which usually means underlayment saturation. In a Tremron tile roof, underlayment is the real waterproofing layer. The tile is a wear surface and UV shield, not the primary water barrier.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Ventura, expect roof repair with Tremron-compatible materials to run $400 to $1,800 for most targeted fixes. That covers the failed tile or flashing section, replacement underlayment if the leak exposed it, and the labor to re-seat and re-seal everything correctly. If you need an entire roof replacement with Tremron-style concrete tile, the realistic range is $8,000 to $20,000, with the spread driven by roof complexity, pitch, the condition of the existing decking, and whether we’re reusing salvageable tile or going full new field.
Every quote we write is line-itemed before work starts. You’ll see the tile cost, underlayment, flashing, labor, and disposal broken out separately. No change orders materialize at the end because we sent someone up there who “found something.” We inspect, we measure, we write the price, and the invoice matches the number you approved. The work carries our Done Right Promise: if the repair fails within a year, we come back and make it right, in writing, no argument.
DIY or Call Us?
You can safely inspect from the ground with binoculars. Look for shifted tiles, visible cracks, lifted flashing, and debris dams at the valleys. You should not walk a Tremron tile roof unless you know how to distribute weight on the tile’s structural ribs. Concrete tile will crack under a misplaced foot, and turning a $600 repair into a $1,500 repair is a bad trade. If you need to access the roof, the risk of a fall is real, and we’d rather you call someone who does this weekly.
If you’ve got a water stain and a broken tile you can see, call us at (831) 604-3426. We’ll send someone out to Ventura, get eyes on it, and give you a written repair price before any work starts. The work says it. We just show up and cut straight.
FAQs

Tremron concrete tile in Ventura typically lasts 40 to 50 years before the tile surface itself degrades, though the underlayment beneath it usually needs replacement at the 20 to 30 year mark. That underlayment cycle is the real maintenance clock on these roofs.
A single cracked Tremron tile can be replaced in about 20 minutes by a roofer who has the matching profile and color, but the underlying underlayment and fasteners need inspection too, because the tile usually breaks for a reason. Call (831) 604-3426 and we’ll tell you if it’s a one-tile job or something bigger.
Most targeted Tremron repairs take half a day to a full day, depending on how many tiles need to be lifted and whether the underlayment has to be cut back and replaced. We give you a live arrival time before we come, not a four-hour window.
We keep common Tremron profile shapes and the most-used Ventura color blends stocked, and for unusual profiles or faded colors we source from local salvage and supply yards so the patch doesn’t read as a patch. If we can’t match it, we’ll tell you before we quote the job, not after.
If your Tremron roof is showing any of the signs above, or you just want a second opinion on a repair another contractor quoted, call (831) 604-3426. The estimate is free, the price is in writing before work starts, and we stand behind the repair for a full year.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


