







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Ventura Owner’s Guide
If you have a Tremron paver driveway, walkway, or patio that’s shifting, cracking, or staining, we stock Tremron-compatible pavers and can match, replace, or rebuild the failed section. Installed paver driveway work in Ventura typically runs $7,000 – $18,000 for a full driveway, while isolated paver replacements and repairs fall between $400 and $1,800 depending on square footage, base condition, and access. Most Ventura homeowners notice the problem the same way: a paver sinks after heavy rain, a corner chips from a car tire, or a section of the driveway starts to look like a patchwork of mismatched stone after a plumber or utility crew dug through it.
Key takeaways:
- Tremron pavers are manufactured concrete units, and while Tremron discontinues colors and patterns, we match existing field pavers through thickness, profile, and color lot sampling.
- Most paver failures in Ventura are base failures, not paver failures. The paver itself is usually fine; the sand and gravel under it shifted.
- We’re an independent Ventura contractor, not affiliated with Tremron. We work with Tremron product because it’s what’s already in the ground across this city.
Which Tremron Models This Applies To

Tremron has manufactured pavers for decades under pattern names like Old Town, Bella, StoneCraft, and Holland. If you bought your Ventura home with an existing paver driveway, there’s a good chance one of these is in your yard. The gotcha: Tremron changes color blends and line names over time, so the exact color you have may be discontinued. That doesn’t mean you’re stuck. We pull a sample from your existing driveway, measure the thickness (most residential driveways use 60mm or 80mm pavers, though 45mm shows up on some patios), and match profile and color from current production or closeouts.
OEM versus aftermarket matters less with pavers than with most building materials. Tremron pavers are concrete, and a structurally equivalent concrete paver from a quality manufacturer will perform the same. Fit matters more than brand. The real compatibility question is paver thickness, joint spacing, and paver pattern. A 60mm paver replaced with an 80mm paver creates a lip that catches toes and tires. A fieldstone pattern patched with a running-bond rectangle looks like a Band-Aid. We get this right because we’ve torn up enough Ventura driveways to know what’s underneath them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Driveway & Pavers Is Failing
- Sunken or dipping pavers. The base layer under the pavers has eroded or was never compacted properly. Ventura’s clay-heavy soil expands and contracts with rain, and a thin base gives way first.
- Water pooling in one spot. The patio or driveway has lost its slope. Water sits instead of running to the street or drain, and that standing water works its way under the pavers and makes the problem worse.
- Wobbling or rocking pavers. Individual units have come loose from the sand joint. This usually starts at the outside edge of the driveway where tire pressure is highest.
- Weed or ant activity between joints. Polymeric sand has failed or washed out. Weeds follow, then roots lift the pavers, and you get a slow-motion teardown.
- Chipped or cracked edges near drive-over areas. This is the one failure that’s often the paver’s fault rather than the base’s. Older Tremron units with a rounded top edge are thinner there, and repeated tire contact along the same line chips them.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a full paver driveway replacement in Ventura, budget $7,000 – $18,000. That covers demolition and haul-off of the old surface, new base material, sand, pavers, and installation. The spread comes from square footage, whether we’re rebuilding the base from scratch or reusing it, edge restraint work, and paver style. Small, isolated paver repairs in a patio or walkway run $400 – $1,800. If base failure has already started under a paved area, know this: replacing just the sunken pavers without fixing the base is a temporary fix. Six months later you’ll see the same dip.
The written price you approve before work starts covers the pavers, the base material, the sand, the labor, and the haul-off. If the work involves a driveway that butts against the street, we check the city’s right-of-way rules when it matters. Ventura’s coastal air and clay soil mean we pay extra attention to drainage grade before we set the first paver. The Done Right Promise covers the installation: if it’s not done right, we make it right.
DIY or Call Us?
You can safely inspect your own pavers: look for obvious dips, check whether water pools after a rain, and see if individual units wobble when you step on them. What you shouldn’t do is start pulling pavers without knowing what’s underneath. Paver work on driveways involves demolition, base compaction, and re-grading, and all of it is hard on the back and easy to get wrong. If the issue is a single cracked paver in a patio and you have spares, go ahead and swap it. If the issue is a sinking driveway or shifting sections, the base under the surface needs real work. Give us a call at (831) 604-3426 and we’ll tell you straight whether it’s a paver problem or a base problem, and what each one costs.
FAQs

Tremron concrete pavers typically last 25 to 40 years in Ventura if the base was built correctly. The pavers themselves rarely fail from age. Base failure, root intrusion, and repeated vehicle weight are what shorten a paver driveway’s life here. If your pavers are chipping or sinking before the 20-year mark, it’s almost always a base or drainage issue underneath. Call (831) 604-3426 and we’ll tell you what’s actually going on.
Individual chipped or cracked pavers can usually be pulled and replaced without redoing the whole driveway, as long as the base underneath is still sound. We match the existing paver as closely as current production allows. If the base has shifted, replacing the paver alone won’t hold. Call (831) 604-3426 for an honest assessment and a written price.
A typical paver driveway replacement takes three to five working days from tear-out to final compaction, weather permitting. Isolated paver repairs take one day. Ventura’s morning marine layer adds moisture to the base material, and we account for that in the schedule so the compaction actually holds. Call (831) 604-3426 for a time estimate on your specific driveway.
We stock common Tremron-compatible field pavers in 60mm and 80mm thicknesses and can order current Tremron production colors for larger jobs. If your exact color has been discontinued, we source closeout lots or match a current equivalent. Along with Tremron-compatible pavers, we also stock parts and materials for KraftMaid cabinetry, Cambria and Silestone surfaces, and other brands we install across Ventura. Call (831) 604-3426 with a photo of your existing paver and we’ll tell you if we can match it.
If your Tremron driveway or patio is failing, get the base checked before you spend money on pavers alone. The local pro will give you a written price and a straight answer, no phone tag and no surprise line items. Call (831) 604-3426 to schedule your free estimate, and we’ll bring the tape measure. The work says it. We just show up and cut straight.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


