







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Home Additions & ADU: The Ventura Owner’s Guide
When a Tremron paver or retaining wall product fails inside a home addition or ADU project in Ventura, you’re usually looking at a structural or drainage issue, not a part you can swap in an afternoon. Installed home additions involving Tremron products in Ventura typically run $45,000 to $130,000, and ADU construction lands between $90,000 and $220,000. Most owners discover the problem the same way: a paver shifts, a retaining wall leans after winter rain, or water starts pooling where the addition meets the original slab. We stock Tremron-compatible materials on hand for repair work, and we’ll give you a written price before any tool comes out.
You’re not calling because you want to redo the whole addition. You’re calling because something specific failed and you need to know if it’s a repair or a rebuild. Fair question. The answer usually comes down to whether the base layer under the Tremron product held up. In Ventura’s marine layer and winter storm cycles, clay-heavy soil expands and contracts aggressively. That’s what kills most of these jobs, not the paver itself.
Which Tremron Models This Applies To

Tremron makes pavers, retaining wall blocks, and outdoor hardscape products in several series lines, and the compatibility question matters more than most homeowners expect. Their paver lines include the Vienna, St. Augustine, and Travertine series, plus eco-friendly permeable options. Retaining walls come in the Diamond, StoneCreek, and BelAire systems. Each uses different pin-and-clip or lip-lock mechanisms, and you cannot mix wall block from one Tremron series with another without getting visible joint gaps and eventual leaning. We see that mistake in Ventura more than anywhere, usually after a homeowner or a lesser contractor tries to save money by sourcing mismatched pallets.
Identifying your specific product is straightforward if you still have the original invoice. If not, flip a paver or wall block and look for the Tremron stamp, then measure the thickness. Most Tremron pavers run 60mm for patios and walkways, 80mm for driveways, and wall blocks range from 3 to 12 inches in face height depending on the series. OEM versus aftermarket matters less with Tremron than with, say, a KraftMaid cabinet hinge or Cambria countertop seam, because Tremron pavers are modular. But color batch variation is real. A replacement paver from a different run will be visibly off in tone, especially in full Ventura sun. We order from current production lots and, where possible, pull from our own stocked batches that have already settled to their final color.
Sawyer Remodel Ventura is an independent contractor. We’re not affiliated with Tremron, but we install and repair their products regularly enough to know what holds up in Ventura’s coastal climate and what doesn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Home Additions & ADU Is Failing
- Pavers shifting or rocking underfoot. This means the sand bedding or base aggregate has washed out beneath. In Ventura, the cause is usually a failed edge restraint or a drainage slope that sends runoff under the addition instead of away from it.
- Water pooling against the foundation line. If your Tremron patio or walkway slopes toward the addition instead of away, you’ll see staining on the slab and eventually moisture intrusion. This is a grading issue, not a paver issue, and it will not fix itself.
- Retaining wall leaning or bulging. Most Tremron wall failures within a home addition context come from insufficient drainage behind the wall or a missing geogrid layer. Once a wall leans past about an inch, it’s a rebuild, not a patch.
- Visible cracks running through multiple pavers in a line. That’s a base failure or a root intrusion, and it means the sub-base was never compacted correctly. Repairing the surface without fixing the base gets you six months before the crack returns.
- Joint sand washing out after every rain. If your paver joints drain away with each storm, the wrong joint material was used or the pavers are loose enough to pump sand out as you walk. Left alone, the pavers start shifting and the whole surface degrades fast.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For the scope of a Tremron-related home addition or ADU in Ventura, expect $45,000 to $130,000 for a full addition that includes hardscape integration, and $90,000 to $220,000 for ADU construction. If the work is limited to paver or wall repair within an existing addition, you’re looking at a much smaller number, usually $3,500 to $11,000 for a paver patio rebuild, or $7,000 to $18,000 for a paver driveway redo. The range depends on square footage, base depth, whether we’re hauling off failed material, and whether the original grading or drainage needs correction.
Our price includes the Tremron-compatible materials, base preparation, compaction, labor, and haul-off of any debris. You get the number in writing before we start, and that’s the number on the invoice. No change orders at the door. The Done Right Promise backs every repair we do in Ventura: if it’s not done right, we make it right, in writing, for a full year.
DIY or Call Us?
You can safely inspect a few things yourself. Check if your edge restraints are still buried and intact. Look for low spots where water sits after rain. Pull up one loose paver and see if the base underneath is solid or mush. That tells you a lot without risking anything.
Where DIY goes sideways is the base work. Compacting aggregate in Ventura’s clay soil takes a plate compactor and, more importantly, someone who knows when the soil is dry enough to work. Do it wrong and you’ll be redoing the whole section in two years. Retaining walls over three feet are even less forgiving, and they can fail catastrophically if the drainage behind them is wrong. A leaning wall can drop hundreds of pounds of block and soil. We’d rather you call us for that. Reach out at (831) 604-3426 and we’ll give you an honest read on whether it’s a repair or a rebuild.
FAQs

Tremron pavers and walls typically last 25 to 40 years in Ventura when the base is installed correctly, and 5 to 10 years when it isn’t. Coastal air and winter moisture shorten the lifespan of the base layer far more than the Tremron product itself. Call (831) 604-3426 if you want us to check whether your base is still sound.
Yes, if the failure is isolated to one area and the base underneath is still stable, we can lift, re-level, and re-set those pavers in a single visit. If the base has washed out or the drainage grade is wrong, the repair becomes a rebuild. We’ll tell you which one you’ve got after looking at it, and the estimate is free.
Most paver repairs and small wall fixes in Ventura take one to three days. A full paver patio rebuild runs two to four days, and a retaining wall rebuild can extend to a week depending on access and drainage work. You’ll get a written schedule with your price, and we hold to it.
We keep common Tremron pavers and wall blocks in stock on hand for repairs, and we source full replacement pallets from local Ventura suppliers on a project-by-project basis. If your specific series is discontinued or on backorder, we’ll match the closest current product and tell you before we buy anything.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


