A Sawyer company - serving Ventura, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Oldcastle Kitchen Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Oldcastle Kitchen Remodeling: The Ventura Owner’s Guide

A full Oldcastle kitchen remodel in Ventura runs $14,000 – $45,000 installed, and the number depends far less on the Oldcastle components than on what’s around them: cabinet layout, countertop footage, and whether walls or plumbing move. We stock and install Oldcastle-compatible cabinetry and hardware daily, and we can usually start within two weeks, not two months. Most Ventura homeowners call us after one of three discoveries: a cabinet face has separated from its frame, drawer glides have worn so the drawer sags when open, or a hinge has stripped out of the particleboard and the door hangs crooked no matter how many times they retighten the screw.

Call (831) 604-3426

Which Oldcastle Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Oldcastle cabinetry shows up in Ventura homes in a few distinct generations. The older Oakmont and Madison lines (common in 1990s and early-2000s builds around Midtown and College Area) used 1/2-inch face frames with concealed Euro hinges that mount to a 35mm cup hole. The newer Boardwalk and Harbor series, mostly installed after 2010, use full-overlay doors with soft-close Blum or Grass hardware. The compatibility gotcha: Oldcastle changed hinge cup spacing between generations. Older models use 42mm cup centers; newer cabinets use 45mm. If you buy a replacement hinge without measuring that distance, the door will never seat flush. We carry both specs on hand.

Sawyer Remodel Ventura is an independent contractor, not affiliated with Oldcastle. We match OEM parts when the cabinet line is still in production, and for discontinued runs we source quality aftermarket equivalents from Blum, Salice, and Hafele. On most Oldcastle cabinets in Ventura, the aftermarket hinge is actually a small upgrade over the original, often with better soft-close dampening.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Oldcastle Kitchen Remodeling Is Failing

  • Doors that won’t stay closed or won’t close square. The hinge has lost spring tension, or the mounting screws are stripping out of the face frame. In Ventura’s dry-summer, damp-winter cycle, particleboard holds screws less reliably over time, especially in un-insulated exterior-wall cabinets.
  • Drawers that tip forward or bind halfway out. The undermount glide has worn its nylon roller, or the glide brackets are loose. Oldcastle’s older side-mount glides are prone to this around year ten.
  • Cabinet face separating from the box. Heat and moisture swings do this to any wood product, but Oldcastle’s older oak veneer faces are especially prone to delaminating along the top rail if a vent hood wasn’t moving enough air.
  • Adjustment screws that spin without holding. The screw has stripped the hinge cup or the mounting plate. This is the point where repeated retightening stops working and the door needs a hinge swap, not a band-aid.
  • Soft-close doors that slam. The damper cartridge inside the hinge has blown its oil seal. It cannot be recharged, only replaced.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A built-in window seat in a bay window

In Ventura, a full kitchen remodel lands between $14,000 and $45,000. The spread comes from three things: cabinet footage (a galley kitchen has far less than a peninsula layout in the hills), countertop material (laminate starts around $2,000 installed; Cambria or Caesarstone can push $6,500 or more), and whether plumbing or gas lines move. A smaller kitchen refresh, cabinets plus counters and hardware but no layout change, runs $9,000 – $20,000.

Every quote is written and line-itemed before work starts. You’ll see exactly what the cabinets cost, what the countertops cost, what labor costs, and what the permit fees are if your project needs them. No change orders appear later unless you add scope, and you approve any change in writing first. The Done Right Promise covers the entire project: if something isn’t right, we make it right, in writing, for a full year after we close out.

DIY or Call Us?

Replacing a single hinge or a drawer glide is a 15-minute job for a homeowner with a #2 Phillips and a tape measure, provided you match the cup spacing and the overlay. Where DIY goes wrong on Oldcastle installs is when the face frame behind the hinge has blown out, or when doors have shifted so far out of alignment that adjusting one throws off four others. At that point you’re fighting geometry with drywall screws, and the cabinet gets worse every time. Tearing out and reinstalling full cabinet runs is a two-person job with lift and align steps that test even experienced finish carpenters. If the whole cabinet run has to come out, that’s not a weekend project. If you’d rather not spend your Saturday proving that point, call (831) 604-3426 and we’ll come look.

FAQs

A dining nook with a built-in banquette

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch