







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Fence Installation: The Ventura Owner’s Guide
Quikrete fence installation in Ventura typically runs $3,500 to $9,000 for a standard residential project, including concrete footings, post setting, and panel or picket placement. We stock Quikrete fast-setting concrete and the common post hardware on hand, so most fence jobs start within days of your estimate, not weeks. Where owners typically discover the problem is at the base: a post that rocks in the wind, a concrete collar that cracked away from the wood, or a gate that drags because the post has pulled out of plumb. If you’re looking at a fence that leans after every Santa Ana wind event, the Quikrete footing underneath it is usually where the failure started. We see it constantly in neighborhoods like Midtown and Pierpont, where salt air and clay soil work on fence posts year-round.
Key takeaways:
- Ventura-installed Quikrete fence projects run $3,500 – $9,000 depending on linear footage, post depth, and soil conditions.
- We stock Quikrete fast-setting mix and standard post hardware on hand for most repair calls.
- Post wobble, concrete cracking, and gate sag are the three symptoms owners report most often.
- Written price before work starts, every time. No surprises on the invoice.
Which Quikrete Models This Applies To

Quikrete doesn’t make fence panels or posts. What Quikrete makes is the concrete that anchors the fence: their Fast-Setting Concrete Mix, the standard 50-pound red bag, and their Quikrete 5000 high-strength mix. The Fast-Setting product is what most fence contractors in Ventura use for post setting because it sets in 20 to 40 minutes and doesn’t need bracing overnight. The Quikrete 5000 is what we spec when the project sits in clay soil or when the fence carries a heavy gate.
The compatibility question owners should be asking isn’t about model numbers. It’s about post type and hole diameter. Standard 4×4 posts need a minimum 8-inch diameter hole. Chain link terminal posts run 2-3/8 inches OD and need a 6-inch minimum. If the post is steel and the concrete is too lean, you get electrolytic corrosion at the concrete line within five years, especially within a mile of the beach. We use Quikrete’s acrylic fortifier additive on coastal jobs for exactly that reason. As an independent Ventura contractor, we’re not affiliated with Quikrete, but we’ve used their mixes long enough to know what holds and what doesn’t in this climate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Fence Installation Is Failing
- Post wobble at the base. The concrete collar has separated from the wood. In Ventura’s shrink-swell clay, this happens when the hole wasn’t flared at the bottom or the concrete was mixed too dry to bond.
- Cracks radiating from the base of the concrete. This is freeze-thaw or soil movement. We don’t get hard freezes in Ventura often, but thermal cycling plus clay expansion does the same work over three to five summers.
- Gate sag or dragging. The hinge post has moved. Even a quarter inch of post displacement at the footing translates to an inch or more at the latch end of a gate.
- Concrete collar lifting out of the ground with the post. The bottom of the hole wasn’t belled, or the hole was too shallow for the fence height. A 6-foot fence needs posts set 24 to 30 inches deep minimum.
- Rust staining at the concrete line on steel posts. Moisture wicks through the concrete and sits at the air boundary. Within a few blocks of the ocean this happens faster than owners expect.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Ventura, a Quikrete fence installation runs $3,500 to $9,000 installed for a typical backyard fence of 60 to 120 linear feet. The range breaks down like this:
- Post replacement with new Quikrete footing (single post): $250 – $600
- Full fence replacement, under 60 linear feet: $3,500 – $5,500
- Full fence replacement, 60 – 120 linear feet: $5,500 – $7,500
- Full fence replacement with gate(s), 120+ linear feet: $7,500 – $9,000
What drives the number is existing concrete removal (old footings have to come out clean), soil type, access for digging equipment, and whether you’re on a slope. Our written price includes demo of the old footing, post holes, Quikrete mix, post installation, panel or picket hanging, and cleanup. The price you approve is the price you pay. Every job carries our Done Right Promise: if it’s not done right, we make it right, in writing, for a full year after we finish.
DIY or Call Us?
You can safely do the inspection yourself. Walk the fence line and push each post at chest height. Check for cracks at the concrete collar. Watch the gate swing. That tells you what’s wrong without lifting a tool.
Replacing a rotted post or resetting a footing is where DIY goes sideways. Digging a 30-inch hole in Ventura clay by hand is a full afternoon. Getting the post plumb in both planes while pouring fast-setting Quikrete gives you about 20 minutes before the mix locks. Mess it up and you’re chipping out the concrete you just poured. We’ve fixed enough homeowner attempts to say this plainly: the concrete is easy to mix and easy to pour wrong. If the post carries a gate, call us. If it’s in sandy soil near the water, call us. If it’s one post on a straight run and you’re handy, it’s a fair Saturday project. For everything else, call (831) 604-3426 and we’ll give you a written price before any work starts.
FAQs

A properly done Quikrete post footing in Ventura should last 15 to 20 years, with the wood post above it failing first in most cases. Coastal properties within a mile of the ocean may see 10 to 15 years because salt moisture accelerates both wood rot and steel corrosion. Call (831) 604-3426 if you’re unsure whether your footing is the original problem or a symptom of the post itself.
Sometimes, but not often. If the post is still sound and the concrete collar is intact but the post has simply loosened, we can re-set it with a polymer grout. If the concrete has cracked or lifted, replacement is the honest fix. Call (831) 604-3426 and we’ll tell you which one you’re looking at, with a written price either way.
A single post replacement with Quikrete fast-setting concrete takes about two to three hours including demo of the old footing and cleanup. A full fence line runs two to four days depending on length, access, and whether we’re removing old concrete at every post. We’ll give you a written timeline before work starts.
Yes. We carry Quikrete Fast-Setting Concrete Mix and Quikrete 5000 on hand, plus standard post hardware and fasteners. For larger fence jobs in Ventura we order the Quikrete by the pallet so it’s on site before the first hole gets dug. Estimates are free: call (831) 604-3426.
If you’ve got a Quikrete fence installation in Ventura that’s leaning, cracking, or pulling loose, don’t wait for the next wind event to finish the job. Call (831) 604-3426 for a free written estimate. We’ll tell you exactly what failed, what it costs to fix, and when we can start. The work says it. We just show up and cut straight.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


