







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Home Additions & ADU: The Ventura Owner’s Guide
Adding an ADU or home addition in Ventura using Quikrete products typically runs $45,000 to $130,000 for a permitted, finished space, and the local pros are on Quikrete-intensive foundation and slab projects across the city every month. Most owners call us because they have a Quikrete product on hand or specified in their plans and either hit a snag with the mix, the form work, or the curing, or because they’re mid-project and realized the slab pour is not something to learn on. That’s the moment this page is for: you have a Quikrete materials list, a partially framed or poured project, and you need someone in Ventura who actually knows how Quikrete products behave in coastal concrete work.
We’re an independent Ventura remodeling contractor, not a Quikrete dealer or affiliate. What we do is work with Quikrete products every week on ADU slabs, additions, footings, and stem walls, and we know what fails and what doesn’t.
Which Quikrete Models This Applies To

When we say Quikrete on an addition or ADU, we’re almost always talking about three product lines: Quikrete 5000 concrete mix for structural slabs and footings, Quikrete ProFinish crack-resistant mix for interior floors that will get tile or flooring, and Quikrete fast-setting mix for fence posts, gate posts, and small pads on the ADU site. The biggest compatibility gotcha we see in Ventura is people using standard Quikrete 4000 PSI mix when their plans call for 5000 PSI at the footing. City inspectors here check the bag tags, and a 4000 PSI bag on a 5000 PSI spec will fail your inspection. We flag this on almost every Ventura ADU project we take over from a homeowner or handyman who got partway in and stalled.
OEM versus aftermarket is less of a decision for bagged concrete than for parts, but the same rule applies: match the PSI rating and the aggregate size to the plans. If your drawings say 3/4-inch aggregate and you buy a pea-gravel mix, you’re pouring the wrong slab. We bring 5000 PSI Quikrete on hand for Ventura additions because coastal air and soil conditions reward the stronger mix, and the price difference is less than $4 a bag at local supply yards. Spending $4 to pass an inspection is the easiest money in the whole project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Home Additions & ADU Is Failing
- Hairline cracks appearing in the first 48 hours. In Ventura’s dry, warm afternoons, a slab poured without a curing compound or with too little water can flash-set and crack. This is usually a water-ratio or finishing issue, not a Quikrete product failure.
- Soft or sandy surface a week after the pour. That’s almost always too much water in the mix. The top layer never cured properly. You can scratch it with a screwdriver, which means flooring will fail on top of it.
- Footings crumbling at the edges. If the forms were pulled too early or the mix wasn’t consolidated, the corners lose structure. An inspector will catch this and red-tag the foundation.
- Standing water pooling on the slab. That’s a slope or leveling problem, and it means the Quikrete slab needs grinding or a self-leveling overlay before framing continues.
- Efflorescence, the white chalky film, showing up within weeks. Common near Ventura’s coast where salt moisture moves through soil. It’s not fatal, but it tells you moisture is moving through the concrete faster than it should, and you want that sealed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full Quikrete-based ADU or home addition in Ventura runs $45,000 to $130,000 depending on size, foundation complexity, and finish level. A smaller addition with a straightforward slab might land at the lower end. A 700-square-foot ADU with a full kitchen and bath pushes toward the top. These numbers are what we actually quote on Ventura jobs, and we write the price before the first bag opens. That written quote covers demo of a failed pour if needed, re-forming, Quikrete material, placement, finishing, and the inspection coordination with the city. If you only need a partial repair, say a failed footing or a cracked slab section, that’s a different conversation and we’ll price it as a repair, not a full rebuild.
Every project carries our Done Right Promise: if it’s not right, we make it right, in writing. We pull permits and schedule the city inspection. You see photos before and after, and the invoice you pay is the number you approved.
DIY or Call Us?
You can check a few things yourself: look at the bag tags and confirm the PSI matches your plans. Check the slab for visible cracking, check for standing water, and look at whether forms are still in place and intact. That’s diagnosis. The actual pour is where DIY falls apart. A footing form that shifts during the pour, a mix that’s too wet, or a slab floated too late can cost you a tear-out and redo, and concrete demolition is not a weekend job. Concrete doesn’t forgive, and it doesn’t wait for you to fix a mistake.
If your Quikrete project is stalled, cracked, or just not passing inspection, call (831) 604-3426 and we’ll tell you straight what it costs to fix and how long it takes.
FAQs

A properly mixed, cured, and sealed Quikrete slab in Ventura should last 30 to 50 years or more. Coastal moisture and occasional salt air mean you want the 5000 PSI mix and a good curing sealer, but there’s nothing in Ventura’s climate that shortens the lifespan if the pour is done correctly. Call (831) 604-3426 and we’ll tell you if your current slab is worth saving.
Yes, hairline and settling cracks can often be repaired with epoxy injection or a resurfacing overlay, but structural cracks at the footing or stem wall usually mean removal and repour. It depends what the crack is doing, and that requires someone to look at the pour and the plans. Estimates are free, and the price is written before any work starts.
For a failed ADU slab or addition footing, plan on two to five days including demolition, re-forming, pour, and cure time before framing resumes. On smaller repairs like a broken pad or a single footing, it’s often a one-day job. We give you a schedule with the written quote.
We stock Quikrete 5000 PSI mix, fast-setting mix, and curing compounds on hand and at our Ventura materials yard, so most pours don’t wait on supply runs. If your plans call for a less common Quikrete product like an ultra-high-strength or specialty mix, we order it from local Ventura suppliers, and it’s usually on site within a day. Call (831) 604-3426 for an exact price on your material list.
If you’re in Ventura and your Quikrete-based addition or ADU needs a real look, call us at (831) 604-3426 for a free estimate. The work says it. We just show up and cut straight.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


