A Sawyer company - serving Ventura, CA
An open living room and dining area after a whole-home remodel

Boral Driveway & Pavers Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Driveway & Pavers: The Ventura Owner’s Guide

We stock and install Boral-compatible driveway pavers throughout Ventura, with most replacements priced between $7,000 and $18,000 for a full paver driveway installation, and smaller repairs landing in the $500 – $2,500 range. You’ll typically see us on-site within a few days of your call, not weeks.

Call (831) 604-3426

Most owners figure out something’s wrong when a paver sinks, shifts, or cracks after a rain. In Ventura, the marine air and clay-heavy soils mean water finds its way under pavers faster than people expect. Once the base layer starts moving, you get uneven surfaces, loose pavers, and edges that pull away from the driveway border. We see it in Midtown, East Ventura, and up toward the hills where drainage runs heavy.

Key Takeaways:

  • Full Boral paver driveway install in Ventura: $7,000 – $18,000 depending on square footage and base condition.
  • Individual Boral paver replacement or spot repair: $500 – $2,500.
  • We carry Boral-compatible pavers and match existing patterns, colors, and thickness on-site.
  • Written price before any work starts. Always.
  • Call (831) 604-3426 for a free estimate.

Which Boral Models This Applies To

A finished basement family room with a media wall and wet bar

Boral paver lines that we work with most in Ventura include the Boral Clay Paver series, Boral Concrete Paver lines, and their Permeable Paver systems. Each series uses different thicknesses and joint spacing, and matching them wrong looks bad and fails faster. A Boral clay paver is typically 1-1/2 inches thick for residential driveways, while concrete pavers run 2-3/8 inches for vehicle traffic. If you’ve got a mixed install, don’t guess. The pavers are usually stamped on the underside with a series code. We match by thickness, color, and texture, not by a name on a box.

OEM Boral pavers are still the cleanest match when you’re replacing sections. Aftermarket equivalents exist, and we’ve used good ones, but the color variance on second-run concrete is real. Under Ventura sun, a slightly-off paver turns obvious within a year. For clay pavers, aftermarket is riskier because the firing temperature affects how the surface weathers. Our default is OEM Boral where it’s still manufactured. If a line is discontinued, we’ll tell you before we quote anything, and we’ll show you the closest match side by side.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Driveway & Pavers Is Failing

  • Sunken or low spots. This usually means the base layer under the pavers has washed out or compacted unevenly. In Ventura, we see it after heavy rain cycles when drainage wasn’t built right originally. The paver itself is fine; the foundation beneath it gave up.
  • Cracked or chipped pavers. Vehicle weight concentrated on one corner, or a paver that was laid over a void, will crack down the middle. Once one cracks, water enters and the freeze-thaw from cold snaps accelerates the damage.
  • Pavers rocking underfoot. A paver that tips when you walk on it means the sand bedding layer has eroded. If you ignore it, the edges chip and you end up needing a whole section replaced instead of one paver reset.
  • Weeds or ants pushing up between joints. This tells you the joint sand is gone, and that means water is getting underneath. In Ventura, the dry months let weeds root deep, then the wet months push them through any gap they can find.
  • Edges spreading or border pavers separating. Without edge restraint, your Boral driveway slowly spreads toward the lawn or the street. You’ll see a gap open between the border course and the field pavers. That’s a fixable problem, but it gets worse every season.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A small remodeled galley kitchen with cabinets to the ceiling

A full Boral paver driveway install in Ventura lands between $7,000 and $18,000. The range is driven by square footage, access for equipment, and whether the old base can be reused or needs to be dug out and rebuilt. Spot repairs, where we pull and reset a section of failing pavers, run $500 – $2,500 depending on the size of the section and how much base repair is needed.

Every quote includes the line-item price for the pavers, the base material, the labor, and the haul-away if there’s existing material to remove. Nothing gets added at the end. Our Done Right Promise applies to paver work the same as any other project: if the pavers shift, settle, or fail within a year, we come back and fix it. Written price before work starts, live arrival time on the day of install, and before-and-after photos so you see exactly what was done under your driveway.

DIY or Call Us?

A single Boral paver that’s cracked or chipped is something a careful homeowner can swap out. Pop it out with a flat bar, check the sand underneath, drop the new one in, sweep joint sand on top. That’s honest advice. Where DIY goes wrong is when the base has failed. If you’ve got a low spot, spreading edges, or three or more pavers that rock, the issue is under the pavers, not in them. Digging out a section, compacting new base, and relaying pavers to grade takes tools most garages don’t have, and getting the drainage slope wrong in Ventura’s clay soil means you do it twice.

If in doubt, call (831) 604-3426. We’ll come look, tell you what’s actually needed, and give you a written price. If it’s a one-paver fix, we’ll tell you that too.

FAQs

A remodeled kitchen with a waterfall island and wood cabinets

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch