A Sawyer company - serving Ventura, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Boral Kitchen Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled primary suite with built-in wardrobes and a window seat
A garage converted into a guest room and home office
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Kitchen Remodeling: The Ventura Owner’s Guide

Boral kitchen remodeling in Ventura typically runs $14,000 to $45,000 for a full rework, depending on cabinet count, countertop material, and whether walls or plumbing move. Most Boral-material kitchens we open up in this area were built in the 1980s through early 2000s, and the failure point is rarely the Boral surface itself; it’s the substrate, the seams, or the trim work around it. You’ll usually find us replacing tired Boral laminate or tile surrounds, rebuilding the cabinet boxes that hold them, and giving the whole kitchen a current layout while we’re in there.

Call (831) 604-3426

Sawyer Remodel Ventura is an independent contractor; we’re not affiliated with Boral, but we work with their materials and match replacements every week. If your Boral kitchen has peeling laminate, swollen MDF under the sink, or grout that won’t stay sealed near the cooktop, you’re looking at more than a patch job.

Which Boral Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Boral made its name in Australia, then pushed into the US market with laminate boards, tile underlayment, and later their compact laminate and stone-look panels. In Ventura kitchens, we most often see Boral Compact Laminate (sold under names like DiamondGloss or through cabinet shops as 12mm door and drawer faces) and Boral Tile & Slate underlayment behind original tile counters and backsplashes. Identifying what you have is straightforward: pull a drawer and check the exposed edge. Compact laminate reads as a dense, dark core with color through the full thickness. Tile underlayment is a cement-fiber sheet, usually stamped with the Boral name on the back after demo starts.

The compatibility gotcha with Boral compact laminate: it’s a full-thickness solid panel, not a foil-wrapped MDF door. That means you can’t “re-laminate” or heat-strip it. If a door is chipped or de-laminated, the panel is replaced, not resurfaced. OEM Boral panel stock is thinner now in some series than what was installed 15 years ago, so we match thickness to the adjacent original doors rather than trusting a part number alone. Aftermarket compact laminate from brands like Wilsonart Compact or Trespa cuts, routes, and installs similarly, but color matching across brands is a fool’s errand; we order from the same series when it still exists and tell you straight when it doesn’t.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Kitchen Remodeling Is Failing

  • Swollen edges on cabinet doors and drawer fronts. This is water migration into MDF substrate under a foil layer, or impact damage on compact laminate. Once an edge swells, it won’t dry flat. Replacement is the permanent fix.
  • Grout cracking repeatedly along the counter-to-backsplash seam. The Boral underlayment behind the tile has flexed or the cabinet box below has settled. Re-grouting buys weeks on a moving joint; fixing the structure buys decades.
  • Doors that no longer close square. Cabinet boxes built on Boral-era framing may have shifted in Ventura’s dry-season soil movement. Hinge adjustments mask it; we check the corner joints and level the boxes before replacing fronts.
  • Dark streaks bleeding through laminate surfaces. Moisture has worked into the core through a failed seam or edge. This is not a surface stain. The panel has begun failing from the inside.
  • Countertop lifting at the sink cutout. We see this constantly in Boral kitchens with original drop-in sinks. Water sits at the rim, the underlayment wicks it, and the whole area loses bond. The fix is a new top, properly sealed, with the sink rim bedded in a modern adhesive layer.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Scope of Work Typical Ventura Installed Price
Full Boral-era kitchen remodel $14,000 – $45,000
Smaller kitchen rework (fewer boxes, laminate tops) $9,000 – $20,000
Cabinet replacement only $4,000 – $13,000
Countertop replacement only $2,000 – $6,500
Backsplash replacement only $800 – $2,500
Kitchen island build or rework $3,000 – $10,000

What drives the spread is simple: how many cabinet boxes get replaced, whether the countertop is laminate or a stone upgrade, and whether plumbing or electrical moves. Every estimate is a written line-item price before any work starts, so you see the parts, the labor, and the haul-off separately. Our Done Right Promise covers the workmanship for a full year after the job closes. We don’t surprise you with a change order at the end.

DIY or Call Us?

You can check a few things without touching a tool: open every door and note which ones bind, run a hand along counter edges for swelling, and look under the sink with a flashlight for water staining on the cabinet floor. That tells us a lot before we even arrive. What you shouldn’t do is start prying Boral panels off cabinet ends hoping to find dry wood. The adhesive bonds used on older compact laminate are strong enough to pull substrate apart, and then a door replacement becomes a box rebuild.

If the failure is on the countertop near any plumbing or an appliance gas line, stop and call. A wet substrate near an ignition source is not a sand-and-paint situation. Call (831) 604-3426 and we’ll get eyes on it in Ventura, usually with a firm written price within the first visit.

FAQs

A remodeled hall bathroom with patterned floor tile and painted walls

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch