







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Ventura Owner’s Guide
A Boral roof replacement in Ventura typically runs $15,000 to $40,000 installed, depending on the profile and square footage. If you’re looking at a repair rather than a full reroof, tile roof repair on Boral systems lands between $600 and $2,500. Most Ventura homeowners discover they need Boral-specific work after a Santa Ana wind event knocks tiles loose, or after a rainy winter exposes a cracked underlayment that’s been quietly letting moisture through for months.
Here’s what matters: Boral isn’t just a brand name stamped on a tile. It’s a concrete roof tile system with specific profiles, weights, and installation requirements that differ from clay, slate, and other concrete tile manufacturers. Matching the wrong part or profile creates more than an eyesore. It creates leak paths. We stock Boral-compatible parts in our Ventura trucks, and we know which profiles are still in production and which ones need matched aftermarket sourcing.
Which Boral Models This Applies To

Boral’s US concrete tile lines include several profiles you’ll see across Ventura rooftops: Boral Flat, Boral Shake, Boral Slate, Boral Mission (barrel profile), and the Boral Country Shingle. Each has a different interlocking geometry. Boral Flat tiles from a 2005 build in Midtown will not lock correctly with Boral Flat tiles manufactured in 2023 without checking the mold run. The profile name is the starting point, not the finish line.
Here’s the compatibility gotcha that costs Ventura homeowners real money: Boral changed the lugs and interlock dimensions on several profiles around 2010, and again on select lines after the Westlake Royal acquisition. Two tiles can say “Boral Slate” on the invoice and still not seat together. We measure the tile width, the water channel depth, and the lug position before ordering anything. When we match a tile, we’re matching the mold, not the marketing name.
On OEM vs aftermarket: Boral (now under Westlake Royal) still manufactures many of its core profiles, so OEM sourcing is often possible for current-production tiles. For discontinued profiles, quality aftermarket tiles from other concrete tile manufacturers can work, but the color and texture match requires a physical sample against the existing roof. We’ve watched homeowners order tiles online from a photo and end up with a patch that looks like a different roof entirely. On a Boral roof, the color is baked into the concrete with iron oxide pigments, so matching means daylight comparison, not screen comparison. We do not guess on this.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
- Cracked or chipped tiles, usually at the corners or the interlock points. Concrete tile is strong, but a tile that’s not properly bedded flexes under foot traffic and cracks at the weak point where the water channel meets the lug. Most of the cracked Boral tiles we find in Ventura are on the lower courses, where roofers walked the eave line.
- Displaced tiles after a Santa Ana wind event. The wind itself doesn’t always break the tile. What happens is the tile was nailed incorrectly during the original install or a reinstall from an earlier repair. Over time the nail backs out and the tile shifts. We repair these and the tile often goes right back on, properly fastened this time.
- Granules or concrete dust building up in gutters and downspouts. A little surface wear is normal on concrete tile. Accumulation that’s consistent and heavy is not. It means the tile body is spalling, usually from freeze-thaw moisture cycles or a manufacturing flaw. Ventura’s coastal fog can accelerate this on north-facing slopes.
- Leaks that appear not at the roof edge but in the middle of the field. Concrete tile isn’t the waterproof layer. The underlayment is. A leak in the middle of the roof often means the underlayment has failed under an intact-looking tile. We see this on Boral roofs in Ventura that were installed before synthetic underlayments became standard; the old felt has just given up.
- Visible water staining on eaves, rafter tails, or fascia boards. This is the symptom that finally gets the call. By this point, water has been travelling under the tiles and over the underlayment for a while. The fix is more than replacing a few tiles; it’s tracing the path and repairing the underlayment at the source.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a full Boral roof replacement in Ventura, budget $15,000 to $40,000. That range spans a modest single-story home with a simple roof plane at the low end, up to a larger two-story home with hips, valleys, and a steep pitch at the high end. The tile profile matters too: Boral Flat and Mission profiles price differently than the heavier, more complex Shake profiles.
For a Boral tile roof repair, you’re at $600 to $2,500 installed. The range comes down to how many tiles are involved, whether we’re also repairing or replacing underlayment, and whether the damage is on a walkable low-slope section or a cut-up area that needs staging and safety setup.
Our pricing always includes the parts and labor as one written number, delivered before work starts. You’ll see the tile cost, the underlayment cost if applicable, the labor, and the disposal. No change orders mid-job. Every Boral repair we do carries our Done Right Promise in writing: if it fails within a year, we make it right. And if a repair we installed fails, the second visit is free. No argument, no re-quote.
DIY or Call Us?
There’s a lot on a roof you shouldn’t do yourself, and for good reason. Walking on concrete tile without pads breaks tiles. Working near the rake or eave on a two-story Ventura home without fall protection is exactly how people get hurt. We run safety lines, we know where the load-bearing points are, and we don’t ask you to get on a ladder.
What you can do safely from the ground: photograph the damage, note whether you see displaced tiles or missing ones, and check your gutters for tile dust and granules. That information helps us bring the right parts on the first trip. What we’d rather you not do: climb up with a bundle of roof cement and a caulking gun, because we have pulled gallons of the wrong sealant off Boral tiles that would have been a clean repair the first time. If you’re in Ventura and you’re not sure, call (831) 604-3426 and describe what you see. We’ll tell you whether it needs a service call or just a photo.
FAQs

Boral concrete tile is rated for a 50-year material lifespan, but the underlayment beneath it generally needs replacement at 20 to 30 years in Ventura’s coastal climate. If your Boral roof was installed over old-school felt underlayment, that’s the layer that determines your real replacement timeline. Call (831) 604-3426 and we’ll inspect both layers for an honest assessment.
A cracked Boral tile can sometimes be sealed if the crack is hairline and away from the interlock, but if the crack runs through the water channel or the tile has split, replacement is the only repair that works. The water channel is a precision-fit drainage path. Sealing over it creates a dam that holds water against the underlayment. For an exact call, send us a photo or book a free estimate at (831) 604-3426.
Most Boral tile repairs take 2 to 4 hours on site, including cleaning out the damaged area, matching the tile, and bedding the replacement. If underlayment replacement is involved, the job expands to a full day or more depending on the square footage. You’ll know the timeline before we start, in the same written estimate.
We carry common Boral Flat and Mission profiles in standard Ventura colors like terracotta, charcoal, and weathered gray. Less common profiles or colors we source through our suppliers, usually within a few business days. If you need a discontinued Boral profile matched, we’ll source a compatible aftermarket tile and physically match it against your roof before installation.
No. The written estimate we give you is the price you pay, unless the scope changes because you ask us to do something different. If the underlying damage is worse than we estimated, we’ll stop, show you exactly what we found, and give you a written revision before proceeding. You approve the number before any additional work happens. Call (831) 604-3426 for a free estimate on Boral roofing work in Ventura.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


