A Sawyer company - serving Ventura, CA
An open living room and dining area after a whole-home remodel

Boral Windows & Doors Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Windows & Doors: The Ventura Owner’s Guide

If you’re searching for Boral windows and doors in Ventura, you likely have a frame that’s warping, a sash that won’t stay up, or a door that drags against the jamb every time the coastal air shifts. Replacement work for Boral-compatible windows and doors in Ventura typically runs $4,500 to $15,000 installed, depending on how many openings and whether we’re matching existing trim. In many cases we can have parts ordered and the first window swapped within two weeks.

Call (831) 604-3426

Most Ventura homeowners discover a Boral part has failed the same way: a window suddenly sticks, a door latch stops catching, or a seal lets fog build between the panes. The salt air here accelerates wear on aluminum cladding and hardware in ways inland homes never see. When that happens, the question is rarely “should I fix it” and more “who actually knows Boral systems well enough to do this right.” That’s where we come in.

Key takeaways:

  • We’re an independent Ventura contractor that works on Boral windows and doors. We’re not affiliated with Boral, which means we give you straight answers about what’s worth replacing versus what still has life in it.
  • Written pricing before any work starts. The number you approve is the number on the invoice.
  • Every window and door install carries our Done Right Promise in writing.

Which Boral Models This Applies To

A home office with a built-in desk and shelves

Boral has produced several window and door lines over the years, and the compatibility question trips up a lot of people. The main split is between Boral’s aluminum-clad wood series and their earlier vinyl lines. Hardware, weatherstripping, and sash balances are not interchangeable across all generations. If your home was built in the 1990s or early 2000s, you’re almost certainly looking at the aluminum-clad wood product line, and the good news is those parts are still findable. The less common vinyl line is harder to source, which changes the repair-versus-replace math.

To identify what you have, open the sash and look for a small silver or white label on the frame or the edge of the door slab. That label usually has the series name and a manufacturing code. No label? Take a photo of the corner joint and the lock mechanism. We match parts by profile shape and hardware footprint, not guesswork. For Boral specifically, we generally recommend genuine OEM hardware for locks, rollers, and balances. Aftermarket weatherstripping and glazing beads are fine when the profile matches exactly. The cost difference on a single lock may be $40, but a generic lock on a Boral door rarely sits flush, and a misaligned strike plate is how you end up with a door that rattles in the wind off the Ventura coast.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Windows & Doors Is Failing

  • Fog or moisture between the glass panes. The seal around the insulated glass unit has failed. It won’t resolve on its own, and the window loses its energy performance. This is the most common Boral issue we see in Ventura, where morning marine layer moisture works on failed seals year-round.
  • Sash drops when you raise it, or won’t stay open. The balance system is worn out. On Boral aluminum-clad units, the block-and-tackle balances have a lifespan, and once one side goes the window cocks in the frame and starts chewing up the weatherstripping.
  • Door drags along the threshold or won’t latch. This can be hinge wear, frame settlement, or roller failure if it’s a sliding door. A dragging door wears the edge of the slab and eventually the jamb, turning a minor fix into a full door replacement if ignored.
  • Visible rot or soft spots on the lower frame corners. Coastal humidity plus irrigation overspray attacks the untreated end grain first. If you can press a screwdriver into the wood, the structural integrity is gone and the corner needs more than caulk.
  • Hardware feels loose, sloppy, or the lock turns without engaging. Internal strike and latch mechanisms wear down. A Boral multi-point lock that’s out of alignment puts stress on the door slab itself, and a sagging slab gets worse every month.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A low-threshold walk-in shower with a bench and grab bar

The installed price for Boral-compatible window and door work in Ventura depends mainly on how many units and what condition the surrounding framing is in. Here’s the range we give homeowners:

  • Single window sash replacement: $450 – $900 per window, including the sash, balance service, and weatherstripping.
  • Full window replacement (Boral-compatible, installed): $800 – $1,800 per opening, depending on size and whether the frame itself needs work. A whole-home window job in Ventura typically lands between $4,500 and $15,000.
  • Sliding glass door roller and track service: $250 – $600, which includes new rollers, track cleaning, and alignment.
  • Full Boral-compatible door replacement: $1,500 – $3,500 installed, depending on slab size, hardware, and trim work.
  • Unlimited silicone seal & weatherstripping refresh on all windows while we’re there: included in our quote. We don’t nickel-and-dime that because it’s how you prep a Ventura home for the wet season.

The full Boral window replacement range is $4,500 – $15,000. Every quote includes the parts, labor, disposal of old units, and our written Done Right Promise. The range exists because a 2-foot-by-3-foot fixed window is a different animal than a 6-foot sliding door with a rotted corner. You’ll get a line-item written price before work starts, and it won’t change at the door. That’s The Relay Standard, and it applies to every job we do.

DIY or Call Us?

You can safely check a few things yourself: whether the weep holes on the bottom track are clogged, whether the weatherstripping is torn, and whether screws on the hinge plates are loose. A can of silicone spray on a sliding door track is fine, and so is tightening a handle screw. But this is also where DIY usually goes wrong on Boral products. Replacing a sash balance means dealing with tension-loaded hardware, and removing an aluminum-clad frame without the right technique destroys the cladding. We’ve fixed more botched Boral repairs in Ventura than we can count, and the repair bill for a damaged frame always costs more than calling us first. The work says it. We just show up and cut straight. Call (831) 604-3426 if you’re not sure whether you’re looking at a five-minute fix or a real problem.

FAQs

A walk-in pantry with wood shelving

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch