







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Home Additions & ADU: The Ventura Owner’s Guide
If you’re planning or already own a Cambridge Pavers home addition or ADU in Ventura and something’s failing, here’s the straight answer: we install and repair Cambridge Pavers-compatible additions and ADUs throughout Ventura, with typical project pricing landing between $45,000 and $130,000 depending on square footage, foundation work, and the paver system you’re matching. Most owners discover a problem the same way: hairline cracking in paver surfaces near the addition’s tie-in point, door frames that no longer sit square, or water pooling where the new slab meets the existing structure. The local pro have worked on enough of these to know exactly what fails first, and it’s rarely the pavers themselves.
We’re an independent Ventura contractor, not affiliated with Cambridge Pavers, which means we call it like we see it: when the part can be matched and repaired, we say so. When it’s a structural issue under the pavers, we say that too.
Which Cambridge Pavers Models This Applies To

Cambridge Pavers runs two main lines that show up in Ventura additions and ADUs: the Ledgestone and ArmorTec series for structural walls and the Cambridge paving stone system (including RoundTable, Maytrx, and Renaissance collections) for driveways, patios, and walkways around the addition. The compatibility gotcha most owners miss is that ArmorTec wall blocks and Maytrx pavers are engineered to interlock with each other, but mixing them with aftermarket blocks from a different manufacturer will throw off the coursing by up to three-eighths of an inch per row. Over a 6-foot wall, that’s a visible wave.
To identify your exact Cambridge product, look for a faint manufacturer stamp on the underside of an edge block or paver, usually a “C” inside a rectangle. If the stamp is gone, bring us a photo and a measurement: Cambridge pavers run 1.5 to 2.25 inches thick for pedestrian use and 3.15 inches for vehicular applications. That thickness range matters because a paver rated for a walkway will crack under the weight of a car if it was used on the driveway approach to your ADU. We stock OEM Cambridge where spec matters and use vetted aftermarket equivalents only where the load rating and color blend match exactly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Home Additions & ADU Is Failing
- Hairline cracks running diagonally across paver surfaces. This is usually not a paver failure. It’s differential settling at the point where the new foundation meets the original slab, and the pavers are just telegraphing the movement. The fix often involves mudjacking or removing the tie-in section and re-compacting.
- Water pooling against the addition’s exterior wall after rain. Cambridge paver installations depend on a 1% to 2% slope away from the structure. If the base settled or the previous installer skipped the geotextile fabric, water finds the wall instead of the drain. You’ll see efflorescence, which is a white mineral bloom, on the lower block courses.
- Doors or windows in the addition that stick or no longer latch. When a new slab settles more than about half an inch, the door frame moves with it. The frame isn’t warped; the foundation under it is dropping. We see this most often in Ventura neighborhoods with clay-heavy soil, especially after a wet winter.
- Edge blocks pulling away from the wall or separating at the corners. Cambridge ArmorTec walls rely on tongue-and-groove locking plus the weight of the caps. If a corner separates, it usually means the base course wasn’t leveled or the drainage stone behind the wall has clogged and is pushing outward.
- Paver color fading unevenly, with some stones clearly lighter. Cambridge UV-stabilized color has a real lifespan in direct California sun. Ventura’s coastal sunshine degrades the surface binder over 10 to 15 years, and replacement pavers will look newer than the originals. OEM color lots change, which is why we recommend replacing a full section, not a patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Ventura, a Cambridge Pavers home addition or ADU falls between $45,000 and $130,000 installed. The wide range comes down to whether you’re repairing a failing paver area around an existing addition or building the addition and the paver surfaces from scratch. A smaller repair job, like re-bedding a sunken paver section and re-sloping the drainage, typically runs $3,500 to $11,000 depending on square footage and whether we’re matching OEM Cambridge product. Full ADU construction with Cambridge pavers for driveway, walkway, and patio areas lands on the higher end of the range, often $90,000 to $130,000.
Every estimate from Sawyer Remodel Ventura includes a written line-item price before any work starts. You’ll know exactly what the pavers cost, what the base prep costs, and what the labor is. If it’s not in the written price, it’s not on the invoice. Our Done Right Promise covers the work for a full year after we close the job, and we put that in writing on every project.
DIY or Call Us?
You can safely check a few things yourself: look for pooling water, take photos of any cracks each month to see if they’re growing, and confirm your downspouts are routed away from the addition. That’s about where the safe DIY ends. Working with compacted base, geotextile fabric, and interlocking paver systems is not a weekend project, and if the issue is foundation settlement, no amount of paver replacement will fix it. Diagnosing the difference between a bad paver and a moving slab takes experience, and guessing wrong means you’re paying for the same repair twice.
If you’re in Ventura and the pavers around your addition are telling you something’s wrong, call us at (831) 604-3426. We’ll come out, look at it, and give you a written price for exactly what it will take to make it right.
FAQs

Cambridge Pavers installed correctly in Ventura typically last 20 to 30 years for the structural block and 15 to 25 years for the surface pavers before UV fading or base erosion becomes noticeable. Coastal salt air and full sun exposure shorten that lifespan compared to inland, shaded installs. Call (831) 604-3426 if you’re seeing premature wear and we’ll identify whether it’s a product issue or an installation problem.
Yes, in many cases a sunken or cracked section can be removed, re-graded, and re-installed with new base material without tearing out the whole surface. If the pavers themselves are intact, we reuse them. Structural wall failures are a different story and usually require rebuilding from the base course up. Call (831) 604-3426 for an honest assessment, and the estimate is free.
A paver repair around an existing addition typically takes 2 to 5 working days once we’re on site, weather permitting. New additions and ADUs with paver work run 8 to 16 weeks depending on permits, foundation scope, and the city of Ventura’s inspection schedule. We’ll give you a date range in writing before work starts, and if anything changes, you’ll know before we do, not after.
We stock common Cambridge paver sizes, edge blocks, and caps on hand for routine repairs, and we special-order specific color lots or ArmorTec structural pieces when the job calls for an exact match. Turnaround on special orders in Ventura is usually 5 to 10 business days. Call (831) 604-3426 and we’ll check the current stock against what your addition needs.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


