A Sawyer company - serving Ventura, CA
A new rear addition with a vaulted beamed ceiling and tall windows

CGI Home Additions & ADU Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A wide opening with a new beam where the kitchen wall was removed
A garage converted into a guest room and home office
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
An open living space after a whole-home remodel
A remodeled kitchen with painted cabinets and a farmhouse sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Home Additions & ADU: The Ventura Owner's Guide

CGI home additions and ADUs in Ventura typically run $45,000 to $130,000 installed, and the range depends on whether you're tying into an existing structure or building a detached unit from the slab up. We stock and install CGI-compatible framing packages, exterior cladding, and energy-rated window systems, and most homeowners call us after a failed rough opening or water intrusion at a header joint. The good news is that if your existing CGI-built addition is showing structural or envelope problems, the fix is almost always local – not a full tear-down.

Call (831) 604-3426

Let's be straight about one thing: Sawyer Remodel Ventura is an independent general contractor, not a CGI factory affiliate. What that means for you is we're free to spec the right product for the job, whether that's a direct OEM CGI panel or a name-brand equivalent with a better lead time. We've worked on CGI additions and ADUs throughout Ventura for years, and we know exactly where these assemblies fail first.

Which CGI Models This Applies To

A single-story rear room addition with tall windows and a new patio

CGI builds a few distinct product families for residential additions and accessory dwelling units, and the part you need depends on which one you have. The most common in Ventura are their pre-fabricated wall panel systems (used heavily in single-story additions) and their window-and-door packages with integrated nailing flanges. You'll spot the model ID on a metal tag riveted inside the door jamb or on the header sticker above the rough opening.

Here's the compatibility gotcha most homeowners don't know: CGI's older panel systems from the mid-2000s used a 4-5/8-inch square-aligned stud profile that doesn't match modern dimensional lumber. If you're splicing into that framing, off-the-shelf connectors won't sit right. We keep the correct bridging hardware on hand for exactly this reason. For aftermarket equivalents, a standard #2 Southern Yellow Pine stud will carry the load, but the wall's shear rating changes if you swap out the sheathing grade. We prefer to match the original spec and have it inspected rather than guess.

One more thing: if your ADU was built under Ventura's 2019 ADU ordinance, your CGI window units are likely low-E dual-pane with a specific U-factor for Title 24 compliance. Swapping in a cheaper single-pane unit isn't just a quality downgrade – it fails final inspection. We won't do it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Home Addition or ADU Is Failing

You'll usually notice the problem before you can name it. A door starts sticking in the frame during winter. A corner of the room feels damp. The window that used to seal tight now whistles when the Santa Anas kick up. Most CGI-related failures we see in Ventura aren't catastrophic – they're slow, and they announce themselves if you're paying attention.

  • Sticking doors or windows at the rough opening: This almost always means the header or jamb framing has moved, usually from moisture cycling. The CGI panel is fine; the connection to the foundation or roof has shifted, and the opening is now out of square.
  • Draft or water staining above a window or door: The integrated nailing flange on CGI window units is the usual suspect. If flashing was lapped wrong at install, water tracks along the flange and shows up as a dark stain on the interior drywall years later.
  • Drywall cracks at inside corners or vaulted ceilings: Truss uplift is common in Ventura's temperature swings, especially in additions with vaulted ceilings that weren't given a floating corner. It looks worse than it is, but it should be inspected.
  • Soft spots or springy floors in the addition: This is moisture or a compromised subfloor seam, often where the addition meets the original house. It's a joist connection issue, not a CSI panel failure, and it needs to be opened up and fixed properly.
  • Visible gap or step crack at the addition-roof junction: This is a flashing and movement joint problem. Ventura's coastal air means a lot of expansion and contraction, and if the ridge or step flashing wasn't installed with a proper metal-to-metal overlap, the gap opens up.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What's Included

A room opened to the studs with new wiring and plumbing

For a CGI-compatible home addition or ADU repair in Ventura, installed pricing runs $45,000 to $130,000 depending on scope. The lower end covers a single-room addition or a partial ADU envelope repair; the upper end is a full detached ADU built from foundation to finish. We write the line items so you see exactly where the money goes: framing and hardware, sheathing and weather barrier, window and door units, rough electrical and plumbing, drywall, and finish work.

Here are the Ventura price ranges we quote most often:

  • Home addition (full build): $45,000 – $130,000
  • ADU construction: $90,000 – $220,000
  • Garage conversion: $30,000 – $80,000
  • Window replacement (CGI-compatible envelope): $4,500 – $15,000

Every quote is a written price before we start, not an estimate that balloons midway. The invoice number is the number you approved. And every job carries our Done Right Promise: if it's not done right, we make it right, in writing, for a full year after we close out.

DIY or Call Us?

Some things you can check yourself: look for the metal ID tag on your CGI window or door, measure the rough opening, and take photos of any cracking or staining so you can send them to us. But opening up a wall or pulling a window unit on a CGI addition isn't a weekend YouTube project. You're dealing with shear walls, possibly load-bearing headers, and a building envelope that has to keep Ventura's ocean air out. Get the flashing wrong and you'll be fixing a bigger problem in three years.

If the issue is a sticking door or minor drywall crack, we'll often diagnose it from photos before we even roll a truck. If it's a structural concern, we'll send out a crew with the right equipment and the right parts. Call (831) 604-3426 for a free estimate and we'll tell you straight what you're looking at.

FAQs

A framer checking new wall framing on a home addition

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch