







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Home Additions & ADU: The Ventura Owner’s Guide
ES Windows home additions and ADU projects in Ventura typically run $45,000 to $130,000 installed, depending on square footage, foundation work, and how much of the existing structure ties into the new space. We stock ES Windows-compatible frames, sashes, and hardware for additions, and we can usually quote the window package within 48 hours of measuring. Most Ventura homeowners call us because a window in their existing home addition or ADU has failed, or because they’re planning a new addition and want window specs locked before framing starts.
Here’s the reality we see across Ventura: ES Windows are built for coastal climates, but the salt air off the Pacific works on aluminum frames faster than people expect. A home addition built in 2012 with ES Windows might already show frame corrosion near the beach, while the same windows two miles inland look almost new. The part that fails first is rarely the glass. It’s the hardware: rollers, locks, and weatherstripping. That’s what this page covers, because that’s what you’re likely dealing with right now.
Which ES Windows Models This Applies To

ES Windows builds several series lines, and the parts are not always interchangeable between them. The ES 300 Series, ES 500 Series, and ES 800 Series use different roller assemblies and lock mechanisms. If you’re standing in front of a window trying to figure out what you have, look for the manufacturer label on the inside edge of the frame, usually stamped or stickered near the top corner. Write down the series number and the glass dimensions. That label is the single fastest way to get the right part ordered the first time.
One compatibility gotcha we’ve seen repeatedly in Ventura: ES Windows manufactured before 2010 used a narrower roller housing than current production. If you buy a current ES roller assembly for an older window, it won’t seat properly. You’ll either need the older-style roller (still available from a few specialty suppliers) or a machined adapter. For homeowners, this is exactly the kind of detail that turns a one-hour swap into a three-week headache. We keep both old and new roller assemblies on hand for ES Windows because we run into this often enough in Midtown and the older beach neighborhoods.
On the OEM-versus-aftermarket question: for locks, catches, and handles, quality aftermarket parts work fine and save real money. For rollers and hinge assemblies, we recommend OEM ES Windows parts. The tolerances matter, and a sloppy aftermarket roller will bind and chew up the track. You’ll replace a $40 part twice instead of a $70 part once. That’s not savings.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Home Additions & ADU Is Failing
- The window won’t slide without real effort, or it grinds when it moves. This almost always means the rollers have worn flat or the bearings have seized. Coastal Ventura air accelerates this: salt and moisture get into the roller housing and the bearings corrode from the inside.
- The lock doesn’t engage or feels loose even when it’s thrown. The lock pawl or the strike plate on ES Windows will wear over years of use, especially on doors and windows that get opened daily. A loose lock isn’t just a nuisance; it’s a security issue on a ground-floor addition or ADU.
- You can feel a draft or see daylight at the sash edge. Weatherstripping on ES frames degrades under UV exposure, which Ventura gets plenty of. Once the seal goes, you lose energy efficiency and start pulling dust and moisture into the space.
- Condensation between the glass panes. The insulated glass unit seal has failed. This isn’t a hardware fix; the IGU itself needs replacement. ES Windows uses double-pane IGUs in most series, and a failed seal means the window’s insulating value is gone.
- The frame shows white, chalky oxidation or pitting, especially ocean-side. Aluminum frames are durable but not invincible. Salt air in Ventura’s beach zones eats at the finish, and once pitting starts, the frame face will only get worse. It’s often a signal that the window needs replacement rather than a hardware swap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For window parts specifically, here’s what Ventura homeowners typically pay with us:
- Roller assembly replacement (per window): $85 to $180 installed, depending on series and whether it’s old or new style
- Lock or handle replacement (per window): $60 to $140 installed, parts included
- Weatherstripping replacement (per window): $50 to $120 installed
- Full IGU glass replacement (per window): $350 to $850 installed, depending on size and glass type
- Complete window replacement in an existing addition or ADU: $4,500 to $15,000 for a typical multi-window project
The bigger number on this page, $45,000 to $130,000, is for a full home addition or ADU where ES Windows go in as part of the build. That range covers everything from a single 400-square-foot bump-out to a detached ADU with a full window package. What drives the price: foundation type, roofline tie-in, window count and sizes, and whether we’re matching existing window styling or starting fresh.
Every parts swap includes the labor, the part, cleanup, and our Done Right Promise. If a window part we install fails within a year, we come back and fix it. No invoice, no argument. The written price you approve before we start is the price you pay after we finish.
DIY or Call a Pro?
Let’s be straight about what you can check yourself. You can clean the tracks, check for visible debris in the roller channel, and confirm whether the lock pawl is actually broken or just misaligned. Those are honest, safe checks. Replacing rollers, especially on a heavy glass panel, is where things get tricky fast. When you pull a window sash out of a second-story home addition in Ventura, you’re handling tempered glass and aluminum in tight spaces. One slip, and a $700 window turns into a broken pane and a trip to the ER. That’s not scaring you; that’s math.
For anything beyond surface cleaning and inspection, call us. We’ll get the right part matched to your ES Windows series, bring it with us, and have the window working again without you needing to guess at measurements or wrestle a sash. The number is (831) 604-3426 for a free estimate.
FAQs

Frames typically last 20 to 30 years in Ventura, but hardware (rollers, locks, weatherstripping) usually needs replacement every 10 to 15 years, sooner within a mile or two of the coast where salt air is constant. Call (831) 604-3426 and we’ll assess what’s worth fixing versus replacing on your specific windows.
Some parts can be repaired, like cleaning and re-lubricating rollers or adjusting a misaligned lock strike plate. But once bearings seize or the lock mechanism breaks, replacement is the only fix that holds. We’ll tell you which path makes sense for your window and your budget.
Most single-window hardware swaps (rollers, lock, weatherstripping) take 30 to 60 minutes on site. A full IGU glass replacement takes longer because we order the glass unit to spec, usually a week or so from order to install. Call (831) 604-3426 for a timeline on your specific window.
We stock common ES Windows rollers, locks, and weatherstripping on hand, including the older pre-2010 roller style that catches people off guard. For series-specific or custom glass, we order directly and schedule the install the same week parts arrive.
No. The written quote we give you before the job is the price you pay. If we uncover something unexpected mid-install, we stop, show you what we found, and put the new number in writing before we touch it. That’s the Relay Visibility Guarantee, and it’s how we’ve worked.
We also work with homeowners building additions and ADUs from the ground up, and we can source window packages alongside KraftMaid cabinetry, Cambria countertops, and Silestone surfaces so the whole build moves on one schedule. Reach us at (831) 604-3426 and let’s get your ES Windows sorted.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


