A Sawyer company - serving Ventura, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

ES Windows Kitchen Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A remodeled kitchen with a waterfall island and wood cabinets
A remodeled kitchen with painted cabinets and a farmhouse sink
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
A wood double vanity with two mirrors after a bathroom remodel
An open living space after a whole-home remodel
A finished backyard cottage with a small covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Kitchen Remodeling: The Ventura Owner’s Guide

Kitchen remodeling around ES Windows in Ventura runs $14,000 to $45,000 installed, depending on how much of the opening we’re rebuilding and what surrounds the window. Most calls we get start with a homeowner noticing water staining below the sill or a crank that’s gone stiff in a house built in the 90s or 2000s, when ES Windows were a common spec in Ventura tract homes. Here’s the reality: window work is almost never just window work. The sill, the drywall returns, the countertop overhang, the backsplash line that dies into the frame – it’s all connected. When an ES window fails in a kitchen, the repair usually turns into a partial remodel because the surrounding surfaces have to come apart to do the job right.

Call (831) 604-3426

That’s why we price it as a kitchen remodel, not a window swap. The window is the trigger. The kitchen is the scope.

Which ES Windows Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

ES Windows were made in several series that show up all over Ventura – the ES-3000 single-hung, the ES-5000 casement, and the ES-7000 slider are the big three we see in kitchens built between roughly 1985 and 2010. Each series used different frame depths and different sash hardware, so a replacement part from one series does not drop into another. That’s the first compatibility gotcha: ES Windows parts are series-specific, and the labels are often worn off by decades of sun exposure this close to the coast.

If you can’t read the label, we match by measuring the visible glass width, the frame depth at the sill, and the shape of the crank housing if it’s a casement. ES-5000 casements used a distinctive square crank base; the older ES-3000 used a round one. The second gotcha: ES Windows used aluminum frames with a thermal break that degrades differently in Ventura’s salt air than it does inland. That break is what fails first, and once it’s gone, the frame conducts heat and cold straight through. OEM parts are getting scarce for the ES-3000 line. Quality aftermarket equivalents exist for most hardware and weatherstripping, but we won’t put an aftermarket sash balancer in a kitchen window that faces the afternoon marine layer – it’ll sag within a year. We spec OEM when the part is structural and aftermarket only when it’s trim or weatherstripping.

We should be clear: Sawyer Remodel Ventura is an independent contractor. We stock and install ES Windows-compatible parts, but we’re not affiliated with ES Windows or their distributor network. We source through our own supply channels and stand behind what we install.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Kitchen Remodeling Is Failing

  • Water staining or soft drywall under the sill. The weep holes on ES aluminum frames clog with salt and grit in Ventura, and water backs up into the wall cavity. By the time you see the stain on the inside, the sill framing underneath is usually already wet.
  • The crank turns but the sash doesn’t move. That’s a stripped operator gear in the ES-5000 casement line. The gear teeth are pot metal and they shear clean off after about 15 years of regular use.
  • Condensation between the panes in the morning. The factory seal on the insulated glass unit has failed. Ventura’s daily temperature swing – especially in neighborhoods like Midtown where morning marine layer burns off fast – accelerates seal failure. Once the seal is gone, the glass fogs and you’re replacing the IGU, not the whole window.
  • A kitchen window that won’t stay open or slams shut. That’s the block-and-tackle balancer in a single-hung ES-3000. The nylon cord in those balancers frays over time, and when it lets go, the sash can drop hard. If you’ve got kids, that’s a finger hazard.
  • You can feel a draft standing at the sink in winter. The felt weatherstripping in the ES-3000 and ES-7000 series rots out after about 8 to 10 years, faster within a mile of the beach. Salt air makes the felt brittle. Replacements are cheap, but getting the frame clean enough for the new strip to seat properly is the part people skip – and that’s why the draft comes back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

In Ventura, a kitchen remodel that revolves around an ES Windows replacement lands between $14,000 and $45,000. Here’s what drives the spread:

Scope Typical Ventura Price
Window only (part, trim, no surrounding work) $4,500 – $15,000
Window + sill rebuild + drywall returns $14,000 – $22,000
Window + backsplash + countertop section $22,000 – $35,000
Full kitchen remodel with ES Windows replacement $35,000 – $45,000

The window itself is the cheap part in most of these jobs. The labor is in the surrounding surfaces – pulling the backsplash without cracking the field tile, templating the countertop to the new sill depth, matching the finish on a 30-year-old cabinet run. We write the price before we start, and it includes the part, the labor, the disposal, and the written Done Right Promise on the whole scope. If the window gets swapped and the surrounding work isn’t right, we’re back to make it right. That’s in writing.

DIY or Call Us?

You can safely do two things yourself: clean the tracks and weep holes with a stiff brush and a shop vac, and take photos of any labels or stamping on the frame so you know exactly what you’re working with. That’s where DIY stops for ES Windows. These are aluminum-frame windows with spring-loaded balances and, on the casements, a tensioned operator arm. If the balance lets go while you’re prying the sash out, it can break a hand. If you drop the IGU, you’re buying a new one and cleaning glass out of your kitchen for a week.

What we tell Ventura homeowners is this: run the test, take the photos, call us. We’ll match the part off your measurements, bring the right hardware the first trip, and the quote is free. Call (831) 604-3426 and we’ll walk you through what you’re looking at.

FAQs

A single-story rear room addition with tall windows and a new patio

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch