







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Bathroom Remodeling: The Ventura Owner’s Guide
A full GAF bathroom remodel in Ventura typically runs $9,000 to $28,000 installed, and most projects take two to four weeks depending on scope. If you’re reading this, you probably have a bathroom that’s leaking at the pan, showing water damage around the curb, or a shower that’s failed outright and started staining the ceiling below. We stock GAF-compatible waterproofing material for shower pans and walls, and we can usually start measuring within a few days of your call.
Here’s the thing most people don’t realize until they’re standing in a wet bathroom at 6 a.m.: GAF makes waterproofing underlayment and membrane systems that go under tile and stone, and when that membrane fails, the tile can look perfectly fine while the structure underneath rots. We see it in Ventura homes all the time, especially in Midtown bungalows and the 1970s tracts east of Victoria Avenue where original bathrooms are hitting the end of their waterproofing life.
We’re an independent Ventura remodeling contractor, not affiliated with GAF. We install their products because they hold up in our coastal climate, but we answer to you, not the manufacturer.
Which GAF Models This Applies To

GAF’s bathroom lineup centers on their HydroStop and Tri-Ply membrane systems, which come in rolls of 3-foot and 6-foot width with a peel-and-stick or torch-applied backing. The newer HydroStop SA line is self-adhesive and is what we install most often in Ventura because it forms a continuous waterproof envelope without the seams that fail on older felt-and-hot-mop pans.
If you’re matching a repair to existing material, look for the GAF logo printed on the membrane edge, usually visible where the pan meets the drain or in the corner folds. Got a torch-down pan? That’s the older Ruberoid TC system, discontinued but sometimes still found in homes built before 2000. We carry HydroStop SA on hand and can match most existing GAF pans without tearing out the whole floor. For aftermarket equivalents, we’ll tell you straight: an off-brand peel-and-stick might save $150 on materials, but the glue quality degrades differently in salt air. Not worth it. We use GAF adhesive and primer with GAF membrane, every time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Bathroom Remodeling Is Failing
- Water stains on the ceiling below the bathroom. This almost always means the shower pan membrane has a breach. Tile and grout aren’t waterproof, they’re wear surfaces. The membrane below is what actually keeps water out, and when it goes, the stain shows up downstairs first.
- Musty smell that won’t leave, even after cleaning. Water is trapped in the mortar bed under the tile. That’s a saturated pan, and air freshener won’t fix it. The subfloor is holding water like a sponge.
- Loose or hollow-sounding tile near the drain. The mortar has broken down from constant moisture exposure. Once tile moves underfoot, the pan system has already failed beneath it.
- Cracked grout at the wall-to-floor transition. This is the first visible sign of movement, and movement breaks waterproofing. In Ventura’s clay soil, slab movement is common, and rigid waterproofing doesn’t flex with it.
- Efflorescence or white mineral deposits on tile or grout. Water is migrating through the tile assembly and evaporating on the surface, leaving salt behind. It means moisture is where it shouldn’t be, and that’s a membrane problem, not a cosmetic one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full GAF waterproofed bathroom remodel in Ventura runs $9,000 to $28,000. The range comes down to size, scope, and how much of the existing structure has to come out. A small 5×8 hall bath with a tub-to-shower conversion and new HydroStop pan starts around $9,000. A master bath with a walk-in shower, curbless entry, custom tile, and new vanity can push toward $28,000.
Every quote from us includes the same things, in writing: demolition and haul-off, new GAF membrane system, mortar bed (or pre-sloped foam pan if your floor and framing allow it), tile substrate, tile and grout, plumbing fixture trim-out, and a written workmanship warranty. What drives the price up is structural repair, custom glass doors, heated floors, and moving plumbing lines. We’ll show you the line items before you sign, and the price we write is the price you pay. Our Done Right Promise means if something isn’t right within a year, we come back and make it right. No invoice-first conversations.
DIY or Call Us?
If you’ve got a failing GAF pan, this is not a caulk-and-pray fix. A shower pan replacement involves removing tile, cutting out the old membrane, leveling the subfloor, and installing a new waterproof system that has to hold water at every seam and corner. Get one seam wrong and you’re doing the whole job again six months later, with a mold problem as a bonus. This is a job for someone who does it every week.
What you can safely do before calling: take photos of the damage, measure your bathroom’s rough dimensions, and note where the water stains show up. That helps us give you a ballpark over the phone. If you’ve got water actively dripping, shut off the fixture if you can and put a bucket or towel down. Then call (831) 604-3426 and we’ll get someone out to look.
FAQs

A properly installed GAF membrane typically lasts 20 to 30 years in our climate, though the tile and grout above it may need attention sooner. Ventura’s coastal humidity and hard water shorten grout life, but the membrane itself usually outlasts two or three tile refreshes if it was installed correctly.
In most cases, no. Once a membrane has breached, the mortar bed beneath is saturated and the only durable fix is full removal and replacement. Patch kits exist, but they fail at the seams, and you’ll be paying twice. Call (831) 604-3426 and we’ll tell you honestly if your situation is the rare exception.
A standard GAF bathroom remodel in Ventura takes two to four weeks from demolition to final grout, depending on scope and any structural surprises. We’ll give you a schedule in writing before we start, and you’ll get photo updates as the work progresses so you never have to wonder what happened while you were at work.
We stock GAF HydroStop SA membrane, primer, adhesive, and corner details on hand, so we don’t have to stop work waiting for a delivery. For specialty trim or unusual pan sizes, we order directly from GAF suppliers and it’s usually on site within two days.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


