A Sawyer company - serving Ventura, CA
An open living room and dining area after a whole-home remodel

GAF Driveway & Pavers Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A small remodeled galley kitchen with cabinets to the ceiling
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

GAF Driveway & Pavers: The Ventura Owner’s Guide

We stock and install GAF-compatible driveway pavers and paving systems throughout Ventura, with paver driveway installation typically running $7,000 – $18,000 depending on square footage, base condition, and the specific GAF product line you’re matching. Most paver failures we see in Ventura aren’t the pavers themselves, they’re what’s underneath: a base that settled, a drainage slope that failed, or edge restraint that let go after a few hard rain seasons. Homeowners usually discover the problem the same way, a paver that rocks underfoot, a low spot that ponds water after January storms, or a row of pavers pulling away from the driveway edge near the garage.

Call (831) 604-3426

Which GAF Models This Applies To

GAF’s paver line isn’t a one-size thing, and the compatibility questions we get most from Ventura homeowners boil down to two things: what’s stamped on the back of your existing paver, and what your base is doing underneath it. GAF pavers come in specific thicknesses, usually 60mm for pedestrian and standard driveway use, but heavier traffic areas and some commercial-rated applications call for 80mm units. The thickness matters because swapping a 60mm paver into a section originally laid at 80mm creates a trip lip at the transition, and it also changes how the surface bears load over time. We’re an independent service provider, not affiliated with GAF, but we work with their paver specs daily and know where the fit issues hide. On the OEM-versus-aftermarket question: for GAF-specific color blends and textured finishes, we order OEM so the new section doesn’t look like a patch. For base materials, edge restraint, and joint sand, we use suppliers we’ve vetted over years in Ventura’s coastal climate, where salt air and wet winters punish the wrong polymer sand faster than you’d think.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your GAF Driveway & Pavers Is Failing

  • Rocking or shifting pavers underfoot. This is almost always a base problem, not a paver problem. The sand bed has washed out or the compacted base has settled unevenly, leaving voids under individual units. If you can rock a paver with one foot, water is already getting under the whole section.
  • Water ponding in low spots after rain. Ventura’s winter rains expose grading failures fast. A properly pitched paver driveway should sheet water to the edges or to a drain. If it ponds for more than an hour after the rain stops, the base has settled and the surface pitch is gone.
  • Edge pavers pulling away from the driveway border. Edge restraint failure lets the outside rows drift outward under tire load. Once the edge opens up, joint sand drains out, and the whole field starts to creep. This one compounds quickly.
  • Weeds or moss growing through the joints. Joint sand with a proper polymer binder resists weed growth. When you see consistent green through the joints, the sand has broken down or washed out, and your pavers are losing lateral support.
  • Cracked or chipped pavers near the driveway apron. The transition where the driveway meets the street takes the hardest hits, especially from garbage trucks and delivery vehicles. Chipping there usually means the pavers weren’t bedded with enough support at the transition, and once one breaks, the load transfers to its neighbors and the cracking spreads.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Paver driveway installation in Ventura runs $7,000 – $18,000 installed, and that spread comes down to three factors: square footage, what’s under the existing surface, and access. A full tear-out and re-base on a standard two-car driveway runs toward the middle and upper end of that range because the old base usually has to come out and get replaced with properly compacted aggregate. If we’re replacing a section and the base is still sound, you’re looking at the lower end per square foot. Every quote includes the same line items: demo and haul-off, base prep and compaction, paver material, edge restraint, polymer joint sand, and a written labor warranty on the install. The price Luca gives you is the price on the invoice. No change orders because we found something we should have caught in the estimate.

DIY or Call Us?

You can safely check a few things without touching a tool: look at where water ponds after rain, walk the driveway feeling for rocking pavers, and check whether the edges are pulling away at the borders. What you should not do is start pulling pavers yourself. Once you break the edge restraint or disturb the sand bed, you’ve changed the load pattern on every paver around it, and a partial fix usually turns into a full section replacement within a year. Paver work is also heavy, repetitive, and hard on your back, and the compaction step is where most DIY jobs go wrong: a rented plate compactor doesn’t replace a properly compacted base, it just vibrates the surface and hides the voids underneath. If you’re seeing any of the failure signs above, call (831) 604-3426 and schedule a free estimate. We’ll tell you what’s actually failing, whether it’s the base or the pavers, and what it costs to fix it right.

FAQs

A dining nook with a built-in banquette

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch