







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Ventura Owner’s Guide
We stock and install Jerith-compatible driveway and paver components in Ventura, with typical installed pricing starting around $7,000 for a full paver driveway and sealing work running between $250 and $700. Most Jerith driveway failures show up the same way: a sinking edge, a cracked cap, or a gate post that’s started to lean after a winter of Ventura rain. The good news is a straight swap is usually a one-day job on existing paver layouts. The homework before that swap is knowing which Jerith profile you’re working with so the replacement matches the rest of the run.
Which Jerith Models This Applies To
Jerith driveway components aren’t one-size-fits-all. Most Ventura homes with Jerith work fall into two groups: ornamental steel driveway gates paired with concrete pavers, and interlocking paver driveways where the Jerith brand refers to the edging and paver profiles, not the gate hardware. The quick way to identify what you have is to check the stamp on a paver’s underside or pull a gate hinge cover and look for the model engraving. Jerith gates use a series code, often a two-letter prefix followed by three digits, and that code dictates whether a replacement hinge, latch, or post cap will seat correctly. Go OEM if the gate is still under its powder-coat season and the finish matters. Go with a quality aftermarket equivalent if the post or hinge is structural and you’re repainting anyway. The one gotcha we see all the time: the paver thickness. Older Ventura installs used 60mm pavers and newer ones use 80mm. If you don’t match the thickness, the top of the driveway looks fine for a month, then the patch settles.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
- Edges are cracking along the border. This is almost always a sub-base issue, not a paver problem. Water gets under the edging, the sand washes out, and the border pavers start snapping at the corners. In Ventura, the wet winters followed by dry heat cycles make this more common than inland.
- Gate post leans or pulls away from the driveway. The original concrete collar around the post has cracked. A leaning post puts bad pressure on the hinge side, and one good gust off the ocean finishes the job.
- Pavers shift or rock underfoot near the garage apron. The compacted base has settled or the sand layer washed out. You’ll hear the hollow click when you step on it. Fixing it early prevents a bigger paver drift later.
- Rust bleeding at the gate bottom rail or hinges. Jerith’s powder coat is good, but coastal air in Ventura is tough on metal. Once the coating breaches, the rust travels under the finish. A quick hinge swap or rail touch-up now beats a full gate replacement in three years.
- Gate scrapes the pavers when it swings. Either the post settled or the hinge bushings wore down. Dragging metal carves a wear line into whatever paver is in its path.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Jerith-compatible paver driveway install in Ventura runs $7,000 to $18,000 depending on square footage, access to the yard, and whether we’re reusing the existing base or digging a new one. Driveway sealing runs $250 to $700, and if you’re swapping individual pavers or a gate post, most of that work is an hourly-plus-materials job we quote before any tools come off the truck. The written price covers the pavers, sand, compaction, clean-up, and haul-away of the old material. The number you approve is the number on the digital invoice. Our Done Right Promise applies to every Jerith repair we do: if it’s not right, we make it right within the year, in writing. No arguing, no invoice surprise.
DIY or Call Us?
You can safely lift a cracked paver with two flathead screwdrivers to check the sand layer under it. You can tighten hinge bolts on the gate and add a little penetrating oil, and that’s genuinely fine to do yourself. But anything involving a Jerith gate post set in concrete or a paver section that spans more than four or five stones is where the DIY risk jumps. Digging out a bad base without a plate compactor leads to a patch that sinks in six months, and pulling a gate post means the gate is now unsecured on your property. If the gate is on the heavy side or the post is the hinge side, call us before you unbolt it. Call (831) 604-3426 for a free estimate and a written price before work starts.
FAQs

In Ventura’s coastal climate, a properly installed Jerith paver driveway lasts 25 to 35 years before the surface needs real attention, and the steel gate’s powder coat typically holds 8 to 12 years before rust spotting starts. The paver base matters more than the paver here. If the sub-base was compacted right and the drainage slopes away from the garage, you’ll be sealing every few years and doing very little else. Call (831) 604-3426 if you want an exact read on what you’ve got.
Yes, unless the paver itself is cracked in three or more pieces, a single or small patch of Jerith pavers can usually be lifted, re-bedded, and compacted for a fraction of a full driveway cost. The repair works as long as the base under them is still sound. If the base has washed out, we’ll cut out the failed section, rebuild it, and feather it into the surrounding pavers so you can’t spot the seam. Estimates for repairs are free.
Most single-gate-post or small paver patch repairs take one day. A full paver driveway replacement across a two-car drive in Ventura runs three to five days, depending on access and how much old material has to come out. We’ll give you the timeline in writing before we schedule, and you’ll get photo updates before and after the work.
We keep common Jerith hinge sizes, post caps, and matching profile pavers on hand, and we can source oddball sizes from local distributors within a couple of days. If it’s a discontinued paver color, we’ll level with you about matching options before you spend anything. Call (831) 604-3426 and we’ll check the truck first.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


