A Sawyer company - serving Ventura, CA
An open living room and dining area after a whole-home remodel

Jerith Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Roofing: The Ventura Owner’s Guide

We stock and install Jerith-compatible roofing parts across Ventura, with most replacements running $400 – $1,800 installed depending on the part and roof type. Same-week scheduling is standard for us, and if it’s a leak, we treat that like the urgent problem it is. You’ll typically find out a Jerith part has failed because water shows up where it shouldn’t, or you spot loose metal flashing after a Santa Ana wind event, or the roof just stops holding up the way it did when it was new.

Call (831) 604-3426

Sawyer Remodel Ventura is an independent service provider, not affiliated with Jerith. What that means for you: we match the part, price it honestly, and install it without making you chase down a manufacturer rep.

Which Jerith Models This Applies To

A dining nook with a built-in banquette

Jerith roofing components spec differently from generic supply-house parts. The compatibility gotcha we see most in Ventura homes: Jerith’s older metal roof profiles use a 1-3/4″ rib spacing, not the 1-1/2″ spacing that’s common on other metal systems. If someone hands you a part cut for 1-1/2″, it won’t seat right and the first stiff wind off the Channel will find it. We carry the 1-3/4″ profile parts on hand so we’re not making two trips to figure out why the first one didn’t fit.

To identify what you have, look for the manufacturer label on the underside of a roof panel or the original packaging if you kept it. Measure the rib spacing yourself before calling anyone. On the parts side, OEM Jerith parts hold their finish and warranty, but quality aftermarket panels and flashing from our metal suppliers often install cleaner on a 15-year-old roof because they’re cut fresh. We’ll tell you which makes sense for your situation and why the price is what it is before you commit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Roofing Is Failing

  • Water staining on the ceiling or wall corners. This is almost always a failed flashing point first, not a full roof failure. In Ventura, the west-facing roof slopes on homes near the coast take the brunt of winter storms, and the flashing gives out before the panels do.
  • Loose or rattling metal when the wind picks up. Santa Ana season exposes weak fasteners fast. If you can hear it, the panel has already lifted enough to compromise the seal beneath it.
  • Visible rust or corrosion at the screw heads. Salt air in the Ventura Avenue and Midtown areas accelerates this. Once the screw head rusts through, the washer below it fails and water follows the screw into the decking.
  • Granule loss showing in gutters or downspouts. On Jerith’s shingle-style profiles, granule loss means the UV protection has been cooked off after years of direct sun. The shingle’s waterproofing is compromised even if it looks fine from the street.
  • Daylight visible from the attic through the roof deck. This is the one we don’t soften. If you can see light, the roof has already let water in somewhere and the decking is likely damaged. Call us, not a handyman.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A second-story addition that matches the existing roofline

For Ventura homes, the range breaks down by what failed. A flashing replacement runs $400 – $800. Replacing a section of Jerith metal panels runs $800 – $1,800 depending on roof pitch, access, and whether the underlayment below the panels also needs cutting out. If we’re doing a full Jerith-compatible roof replacement on an average Ventura home, you’re looking at $8,000 – $20,000.

Every quote includes the parts, the labor, the removal of whatever failed, and disposal. The number we write on the estimate is the number on your invoice. No change orders because we found something we should have seen in the first walkthrough. Our work carries the Done Right Promise: if it’s not done right, we make it right, in writing, on every job.

DIY or Call Us?

You can safely check two things without getting on a ladder: inspect your gutters for granule buildup after a rain, and look at your ceiling corners with a flashlight after a heavy storm. That tells you if you have a problem, not where it started. The actual repair on Jerith roofing is not a weekend project. Roofs in Ventura are pitched to shed rain fast, and walking an older metal roof without proper tie-off and the right shoes puts you one wrong step from a hospital visit, or worse. Cutting out and re-flashing a roof penetration is skilled work. Do it wrong and the roof leaks worse than before. Call us at (831) 604-3426 and we’ll look at it honestly, tell you what actually needs doing, and give you a fixed price before any work starts.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch