







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Ventura Owner’s Guide
We install and remodel kitchens built around KraftMaid cabinetry throughout Ventura, from Midtown bungalows to the hillside tracts off Foothill. A full KraftMaid kitchen remodel in Ventura runs $14,000 to $45,000 installed, depending on cabinet line, layout changes, and countertop scope. You usually land here after a hinge tears out of a face frame, a drawer glide gives up, or you open a door and the finish has worn through where your hand lands every morning.
Which KraftMaid Models This Applies To
KraftMaid ships in three core lines: Vantage, Venicia, and the custom-order Legacy series. Vantage is the frameless line with full-overlay doors and soft-close hardware standard. Venicia is the semi-custom framed series most common in Ventura homes built between 1995 and 2015. Legacy is their fully custom line, which means less aftermarket hardware is available and you’re usually better off sourcing directly from KraftMaid specs. Here’s the look: the cabinet’s model and color code sit on a sticker inside the sink base door or the top drawer of the bank. Without that sticker, measure the door overlay. Vantage doors sit flush with the cabinet body. Venicia doors sit proud of the frame by a quarter inch. That one measurement decides which hinge cup, which glide, and which trim kit we order. Independent note up front: Sawyer Remodel Ventura is not affiliated with KraftMaid. We’re a general contractor that works with their product because half the kitchens in this town already have it and owners deserve a crew that knows the line without waiting on hold with a manufacturer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Doors that won’t stay closed or won’t close square. Usually a worn hinge cup or a face frame that has swelled in Ventura’s marine air. The fix is a hinge replacement, not a door replacement, unless the MDF under the screw has crumbled.
- A drawer that drops or grinds on one side. KraftMaid uses side-mount epoxy-coated glides on Venicia and undermount Blum glides on Vantage. When the epoxy coating wears through in one spot, you get a drawer that feels like it’s rolling over gravel.
- Finish peeling at the bottom of the sink base. Water wicks up through the toe kick over years of spills and drips. Ventura’s hard water doesn’t help. This almost always shows up before any structural failure, so it’s a signal worth catching early.
- A corner cabinet lazy susan that binds or grinds. The bearing plate underneath gets caked with cooking dust and sand that tracks in from beach days. The part itself is cheap. The labor to pull the door and re-seat the mechanism is the real cost.
- Roll-out shelves that list to one side under weight. The nylon roller clips fatigue with age. You’ll see hairline cracks along the clip body before it snaps. When it snaps, the shelf is the last thing you want to trust with a stand mixer on it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full KraftMaid kitchen remodel in Ventura spans $14,000 to $45,000. The low end covers a same-footprint refresh: reuse the existing cabinet layout, swap doors and drawer fronts on Vantage or Venicia boxes, new glides and hinges throughout, and a new sink base if water damage has found its way in. The high end covers moving walls, rebuilding cabinet runs, a new island, under-cabinet lighting, and full countertop replacement. Smaller scopes that touch only one section run lower: cabinet installation alone is $4,000 to $13,000, and countertop installation is $2,000 to $6,500 in Ventura. The price on the written line-item quote is the price you approve, and it doesn’t change at the door. That’s The Relay Standard, and it applies to every KraftMaid job we take.
DIY or Call Us?
KraftMaid boxes are friendly to partial fixes if you’re handy and the problem is just a hinge or a glide. Swap the part, keep the door. Where it goes wrong is when the cabinet box itself has water damage, or the face frame has split, or the end panel started pulling away from the drywall. Rebuilding a cabinet end panel means pulling the countertop, and that’s a two-person job with real risk to the counters. If the failure is water-related, call us. Water that got into the sink base has usually gotten further than you can see without pulling the toe kick off. Call (831) 604-3426 and we’ll tell you straight whether it’s a parts swap or a rebuild.
FAQs

KraftMaid cabinets in a dry interior kitchen last 20 to 30 years. In a kitchen that gets heavy steam and no exhaust fan, or a house within a mile of the coast, figure 15 to 20 before hinges and glides need a full swap. The boxes outlast the hardware by a decade or more.
Yes, and that’s the smartest spend if your layout works and the boxes are dry. We reface doors, install new drawer fronts, replace every glide and hinge, and add soft-close retrofits. You keep the solid KraftMaid boxes and lose everything that makes the kitchen feel dated. Call (831) 604-3426 and we’ll give you a line-item number for the reface versus the full tear-out.
A same-footprint remodel runs 3 to 5 weeks from demo to final walkthrough. A layout change, new island, or wall removal pushes it to 6 to 10 weeks. We’ll tell you the honest timeline before work starts and send photo updates as the job moves.
We keep common Venicia and Vantage hinges, Blum glides, and roller clips on hand. Door fronts and finished panels are ordered per job in the exact color code from your cabinet sticker. We don’t guess at finishes; we match the code.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura, serving Ventura and nearby areas.


