A Sawyer company - serving Ventura, CA
An open living room and dining area after a whole-home remodel

Oldcastle Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Oldcastle Roofing: The Ventura Owner’s Guide

We install and repair Oldcastle roofing systems throughout Ventura, and we keep the most common failure points on hand: replacement caps, ridge components, and flashing matched to Oldcastle’s concrete and clay tile profiles. Installed repair work in Ventura typically runs $400 to $1,800 depending on scope, and a full Oldcastle roof replacement runs $8,000 to $20,000. Most folks find out they need parts the hard way: a tile that slid after a Santa Ana wind event, a cracked ridge cap after the summer heat, or water staining on a ceiling after the first real rain in November.

Call (831) 604-3426

Which Oldcastle Models This Applies To

A dining nook with a built-in banquette

Oldcastle’s roofing line in Southern California splits into two families: their concrete tile profiles (Flat, Barrel, and Slate-look) and their clay tile profiles, which show up more on older Spanish-style homes in Midtown and the hills around Grant Park. The gotcha we hit on Ventura jobs regularly is that Oldcastle changed their interlocking lug pattern on the Flat Concrete tile around 2008. A tile made before then won’t seat correctly against a new one from a different batch, which is why we always match the tile by measuring the side lap and checking the underside stamp against the batch code. We’re an independent contractor, not affiliated with Oldcastle, so we stock factory OEM Oldcastle caps and standard profiles from our supplier network, plus quality aftermarket equivalents when a profile is discontinued.

Here’s the compatibility reality: if your roof was installed before 2008, there’s a decent chance the exact tile you need is no longer in production. We handle that by pulling a sample tile, verifying the profile, and sourcing either remaining OEM stock or a dimension-matched aftermarket replacement that seats on the same lug pattern. For newer roofs, we carry the current profile caps and rake tiles on hand so a repair doesn’t wait on a supplier run from Oxnard.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Oldcastle Roofing Is Failing

  • Cracked or dislodged tile after wind. Santa Anas hit Ventura hard, and tile that gets lifted and dropped rarely survives. The crack usually runs right through the nail hole, and once the fastener is exposed to salt air, corrosion follows.
  • Water staining on the underside of eaves or ceiling corners. This is almost always a broken or missing underlayment section under the tile, not just a tile issue. Oldcastle tile sheds water, but the felt or synthetic underlayment beneath it is the real waterproof barrier, and it breaks down faster in Ventura’s sun than most owners expect.
  • Granule loss or bare spots on the tile surface. Concrete tile shouldn’t shed granules the way asphalt shingles do. If you see sandy material in gutters, the tile surface is spalling, usually from repeated wet-dry cycles where you get coastal moisture against warm tile.
  • Ridge caps cracked or missing mortar at the peak. Ridge cap failure starts small: hairline cracks along the mortar joints. Once one cap goes, the next wind event pulls the neighbors loose, and suddenly the whole peak is exposed.
  • Visible rust or lifted flashing at valleys and penetrations. The flashing around vents, skylights, and chimneys takes the most abuse on a tile roof. Oldcastle tile can last 50+ years, but the flashing it relies on rarely makes it past 20 without service in this climate.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled kitchen with painted cabinets and a farmhouse sink

In Ventura, a repair that replaces up to 20 tiles with new Oldcastle-compatible profile tiles, including fasteners and any underlayment patch, runs $400 to $1,800. The spread comes down to access: a single-story walkable roof in Midtown costs less than a two-story cut-up roof in the hills that needs a full safety setup. Full roof replacement with Oldcastle or comparable concrete tile sits at $8,000 to $20,000 depending on square footage, teardown, and underlayment choice.

What you get from us on any Oldcastle repair: a written line-item price before we start, the exact tile profile noted on the invoice with the batch code, and the Done Right Promise behind the install. If a tile we set comes loose or the repair fails within a year, we come back and fix it. No argument, no re-invoice. We don’t work on pricing games, and we don’t surprise you at the end.

DIY or Call Us?

Walking a tile roof in Ventura is not a weekend project. The tiles are brittle, the slope on many Ventura homes is steep enough to turn a misstep into a fall, and one wrong foot puts you through a tile and the underlayment both. What you can safely do from the ground: use binoculars to check the ridge line for missing caps, note any tile edges that look lifted, and clear your gutters so water isn’t backing up under the eave line. If you see exposed fastener heads, cracked tiles, or daylight at the ridge, call us at (831) 604-3426 and we’ll get up there with the right profile, the right fasteners, and a safety setup. The work says it. We just show up and cut straight.

FAQs

A freestanding soaking tub in a remodeled primary bathroom

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch