A Sawyer company - serving Ventura, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Owens Corning Kitchen Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A remodeled kitchen with painted cabinets and a farmhouse sink
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Owens Corning Kitchen Remodeling: The Ventura Owner’s Guide

A full Owens Corning kitchen remodeling project in Ventura typically runs $14,000 to $45,000 installed, depending on cabinet layout, countertop material, and how much structural work the existing kitchen needs. Most Ventura homeowners call us after discovering water damage behind a sink base cabinet, or when a countertop seam has separated and the substrate is swelling. You’re not calling because you want a new kitchen on a whim. You’re calling because something failed, and you need to know if it’s a patch job or a full replacement.

Call (831) 604-3426

Here’s the short version: if the failure is isolated to one component, we can often replace that part and leave the rest of the kitchen alone. If water has been running under cabinets for months, the math changes fast. Either way, we price it in writing before any work starts, so you know exactly what you’re approving.

Which Owens Corning Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Let’s be straight about one thing right up front: Owens Corning doesn’t manufacture kitchen cabinets or countertops. Where Owens Corning shows up in a Ventura kitchen is in the building envelope around it: insulation batts and rigid foam board behind the walls, attic insulation above the ceiling, and sometimes acoustic insulation in interior walls. If your kitchen has Owens Corning products in it, they’re doing quiet work behind drywall, and when they fail or were installed wrong, the symptoms show up as something else. Cold walls in winter, a kitchen that won’t hold temperature in August, moisture condensing where it shouldn’t.

The relevant Owens Corning lines for Ventura kitchens are EcoTouch PINK Fiberglas batts, Thermafiber mineral wool (fire-rated, common in walls shared with a garage), and FOAMULAR XPS rigid board. Identification matters: EcoTouch batts have the Owens Corning logo printed on the facing. If the facing is torn, we verify by measuring R-value against stud bay depth. A 2×4 wall with R-13 batts is standard. If you’re seeing R-11 in a 2×4 cavity, someone cut a corner. The OEM-vs-aftermarket question for insulation is simple: Owens Corning batts are the OEM standard, and there’s rarely a reason to substitute. Aftermarket fiberglass exists, but the compression testing and fire ratings on Owens Corning product is documented, and in a Ventura kitchen where the wall backs up to a range, that matters.

We also work with KraftMaid and Wellborn cabinetry, Cambria and Caesarstone countertops, and Silestone surfaces. When a kitchen remodel goes beyond the insulation layer, the Owens Corning product usually stays in place and we build around it correctly. When it’s failed, we replace it before we close the wall back up.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Owens Corning Kitchen Remodeling Is Failing

  • Cold drafts near the sink base in winter. This usually means insulation batts have settled, been pulled out during a prior plumbing repair, or were never installed tight against the rim joist. The air moving through that cavity is bypassing whatever R-value was supposed to be there.
  • Condensation on the wall behind the refrigerator. Warm kitchen air is hitting a cold wall cavity. That means either missing insulation or a vapor barrier installed on the wrong side. In coastal Ventura, the wrong side is more common than you’d think.
  • Kitchen won’t hold a set temperature in summer. Fiberglass batts lose effectiveness when compressed. If someone shoved batts behind electrical boxes or plumbing lines instead of cutting around them, you’re getting maybe half the rated R-value.
  • Drywall feels damp or smells musty under the sink after rain. Insulation isn’t the root cause here, but wet insulation hides the evidence and holds moisture against the framing. By the time you smell it, the batt is saturated and the real leak needs to be found.
  • Higher cooling bills without a change in usage. This is what air leakage through a poorly insulated kitchen wall looks like on paper. The insulation didn’t necessarily fail, but the install did, and the fix is the same: open the wall, correct it, close it back up.

Replacement Cost & What’s Included

A home office with a built-in desk and shelves

In Ventura, a full kitchen remodel runs $14,000 to $45,000. But if we’re talking specifically about replacing failed Owens Corning insulation in a kitchen wall, that’s a much smaller job, typically $400 to $1,800 depending on how much drywall has to come out and how many linear feet of wall are involved. The bigger number only applies if the failure led to water damage that compromised cabinets, flooring, or countertops, at which point you’re into a real remodel.

What drives the range on the full remodel: cabinet grade and count (KraftMaid starts lower, Wellborn runs higher), countertop material (Caesarstone and Cambria are premium quartz), whether the kitchen footprint changes, and what we find behind the walls once demo starts. Every line item is written down before we start. The number you approve is the number you pay. Our Done Right Promise covers the workmanship for a full year after close, in writing, on every project. No fine print about what’s covered. If it’s not done right, we make it right.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can check a few things yourself. Pull the toe kick off a base cabinet and look at the insulation where the wall meets the floor. Check for gaps around plumbing penetrations under the sink. Look at the attic hatch seal above the kitchen. All of that is safe and gives you real information.

What you shouldn’t do is open a wall yourself. Kitchen walls carry electrical, plumbing, and sometimes gas lines. Cutting into one without knowing what’s behind the drywall is how you end up with a bigger problem than a cold kitchen. Beyond that, fiberglass insulation installed wrong isn’t just ineffective, it’s a lung irritant. We wear respirators for a reason. If you’ve found signs of failed insulation or water damage behind a kitchen wall, call (831) 604-3426 and we’ll come look at it. The estimate is free.

FAQs

A wood double vanity with two mirrors after a bathroom remodel

Call for a Free Estimate

If your Ventura kitchen has a failed Owens Corning product behind the walls, or if you’ve discovered water damage that started small and is now a remodel, call (831) 604-3426. We’ll schedule a visit, price the work in writing, and you’ll know exactly who’s coming and when. The work says it. We just show up and cut straight. The local pro work throughout Ventura, including Midtown and the surrounding neighborhoods.

Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch