A Sawyer company - serving Ventura, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower

Schluter Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
An open kitchen and dining area after a remodel
A whole-home remodel with the living, dining and kitchen areas opened up
A second-story addition that matches the existing roofline
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Roofing: The Ventura Owner’s Guide

If your Schluter roof system is leaking, lifting, or showing rust at the seams, we stock the Schluter-compatible roofing parts to fix it, and most repairs land between $400 and $1,800 installed in Ventura. We’re typically on-site within a day of your call, and a written price hits your phone before we touch a single fastener. Owners usually discover the problem the hard way: a water stain on the ceiling after the first real rain, a drip near the skylight, or flashing that’s peeled back after a Santa Ana wind event.

Call (831) 604-3426

Sawyer Remodel Ventura is an independent contractor, not a Schluter factory rep. That matters because we’ll tell you honestly whether you need an OEM part, an aftermarket equivalent, or a full replacement of a failed section. The crew have pulled apart enough Ventura roofs to know the difference.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter is best known for waterproofing and tile systems, not traditional shingle roofing. When a Ventura homeowner says “Schluter roof,” they almost always mean one of three things: Schluter metal edge trim and flashing used at roof-to-wall transitions, Schluter’s KERDI waterproofing membrane used under tile on a flat roof deck or balcony, or a hybrid system where Schluter drainage mat sits under a paver or pedestal roof surface. Each one has different failure points, and the right fix depends on which product you actually have.

The fastest way to identify your part is to look at the edge profile. Schluter flashing pieces have the product name stamped into the metal on the underside, usually near the bend. KERDI membrane comes in rolls with a printed grid and the KERDI name repeated across the surface. For metal parts, measure the exposed face width in millimeters: the most common Schluter roof edge profiles run 40mm to 80mm. Buying the wrong width means water pools where it should drain, and that’s a $1,000 mistake disguised as a $40 part.

On OEM versus aftermarket: Schluter’s metal trims are aluminum with a factory-applied coating, and for Ventura’s salt air, the factory finish matters more than the brand stamp. We stock both OEM Schluter where the profile is unusual and quality aftermarket equivalents where the profile is standard. You get the choice, with the price difference spelled out in writing before work starts.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Roofing Is Failing

  • Rust staining at seams or fastener heads. Schluter aluminum itself doesn’t rust, but if a previous installer used a non-compatible steel screw, the screw corrodes and bleeds rust down the metal face. This is the single most common Schluter metal part failure we see in Ventura, especially within a mile of the coast.
  • Water stains on the ceiling directly below a roof edge. That’s usually failed flashing, not a shingle problem. The Schluter edge piece has lost its bond or its fasteners, and rain is running behind it instead of over it.
  • Membrane peeling or bubbling on a flat tile deck. KERDI only waterproofs if it’s fully bonded with thin-set. Edges lift after years of Ventura sun heating the surface to 140 degrees, and once one edge lifts, water works its way underneath.
  • Efflorescence or white crust at tile joints on a balcony or roof deck. Water is getting into the mortar bed and carrying minerals up through the grout. The Schluter membrane below has a breach somewhere, and patching the grout won’t fix what’s underneath.
  • Ponding water on a flat or low-slope roof surface 48 hours after rain. Schluter drainage mat is designed to move water, but it clogs over time with debris and fine silt from Ventura’s dry season dust. When the channels clog, water sits, and the supporting surface starts to fail.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A stone counter, tile backsplash and open shelf after a kitchen remodel

In Ventura, expect Schluter roofing part replacement to run $400 to $1,800 installed, depending on what failed and how much has to come apart. A simple edge flashing swap on a single roof plane runs $400 to $700. Replacing a section of KERDI membrane under a small tiled balcony runs $900 to $1,500 because we pull the tile, repair the membrane, and retile. A full flat-roof deck waterproofing redo with new Schluter membrane, drainage mat, and surface material falls into roof replacement territory at $8,000 to $20,000.

The range comes down to access (single-story versus second-story roof with no good ladder path), the square footage of membrane involved, and whether the framing underneath got wet and needs repair. Every quote from Sawyer Remodel Ventura is written before work starts, with parts and labor separated line by line. If the framing is sound and the scope doesn’t change, the number you approve is the number you pay. Our Done Right Promise covers the new part and our installation for a full year.

DIY or Call Us?

You can safely inspect a few things yourself. Check the fasteners on your Schluter metal edges: if you see rusted screws, uneven spacing, or missing pieces, that’s good information. Look for lifted membrane edges at any place where the tile meets a wall or penetration. Take a photo and note the measurements. That’s where DIY should end.

Roof waterproofing is a system, not a patch. A homeowner who replaces one piece of Schluter flashing but doesn’t address the underlying fastener pattern or membrane lap has just bought a slower leak. And working on any roof surface, even a low-slope flat deck, means height risk and the real possibility of turning a $400 part into an $8,000 fall and rebuild. On a Schluter balcony or roof deck, the membrane has to be lapped in the right direction, bonded fully, and sealed at every penetration. Get it wrong and water finds the one seam you missed.

If you want a pro’s read on it, call (831) 604-3426. We’ll look, tell you what’s actually wrong, and hand you a price in writing. If you decide to live with it for now, at least you’ll know what you’re dealing with.

FAQs

A remodeled primary suite with built-in wardrobes and a window seat

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch