A Sawyer company - serving Ventura, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Tremron Kitchen Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled living room with built-in shelves around the fireplace
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Kitchen Remodeling: The Ventura Owner’s Guide

If you have a Tremron kitchen and something’s failed, we can match the part and install it. A full Tremron kitchen remodel in Ventura runs $14,000 to $45,000 depending on scope, cabinet line, and countertop material. Most owners find us after a hinge breaks, a drawer slide grinds to a halt, a cabinet box pulls loose from the wall, or a countertop seam opens up. We stock common Tremron-spec hardware on hand, and if it’s a cabinet or countertop replacement, we order direct and schedule the install in one visit.

Call (831) 604-3426

Which Tremron Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Tremron kitchens are best known for exterior hardscapes, but the indoor cabinet and counter lines share the same manufacturing discipline: modular boxes, standardized hardware, and finish specs that favor durability over ornamentation. Most Tremron kitchen components in Ventura fall into two groups. The first is framed cabinetry with face-frame construction, typically 3/4-inch plywood boxes and soft-close hardware. The second is frameless or European-style boxes with 3/4-inch melamine or plywood, full-overlay doors, and integrated hinge systems.

Here’s the compatibility gotcha that catches people: Tremron uses both 35mm cup hinges and a smaller 26mm cup on certain drawer-front applications. If you buy hardware before you measure, you will be wrong about half the time. Open a door and look for a stamped code on the hinge plate. If there’s no stamp, the cup diameter is the tell. We keep both sizes on hand in Ventura. For aftermarket replacement, Blum and Salice make direct-fit equivalents for most Tremron hardware, and we’ve found them identical in operation at roughly 60 to 70 percent of the OEM price. If you want OEM, we order it. If you want it quiet and half the cost, we’ll show you the aftermarket part and let you pick.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Kitchen Remodeling Is Failing

  • Cabinet door no longer closes flush or drifts open. The hinge spring has lost tension or one of the mounting screws stripped out of the box. In Ventura’s salt air near the coast, stamped hinge springs corrode faster than inland and fail in predictable fashion.
  • Drawer slides scrape, stick, or drop on one side. The ball-bearing carriage inside the slide has worn flat, or the nylon wheel on an older Tremron epoxy slide has cracked. Once one side fails, the other side follows within weeks because the drawer is now racked.
  • Cabinet box pulls away from the wall. This is a mounting failure, not a cabinet failure. We see it most in Midtown and downtown Ventura homes where the original install used drywall anchors instead of hitting studs, and two decades of loading finally won.
  • Countertop seam opens or laminate bubbles at the edge. Water has worked into the seam or the substrate. It’s a slow failure that starts as a hairline gap and becomes a lift you can catch with a fingernail.
  • Soft-close no longer soft-closes. The piston inside the hinge or slide has leaked its damping fluid. Some are serviceable. Most are a five-minute swap with the right part in hand.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

An open living space after a whole-home remodel

For a repair call in Ventura, most Tremron hardware replacements land between $180 and $650 with the part included, and the work is done same-day. For a full remodel, you’re looking at $14,000 to $45,000 with the biggest swings coming from cabinet count, countertop material, and whether you’re changing the footprint. Here’s the breakdown:

  • Tremron cabinet installation: $4,000 – $13,000
  • Countertop replacement: $2,000 – $6,500
  • Backsplash install: $800 – $2,500
  • Full Tremron-compatible kitchen remodel: $14,000 – $45,000

Every number above is a written price before work starts. You approve the line item, you get the line item on the invoice. If the labor is ours, it’s covered by the Done Right Promise. If the part is OEM, the manufacturer warranty applies on top of that.

DIY or Call Us?

A hinge or drawer slide swap is easy money if you’ve done it once and you have the right cup size. But here’s the thing we tell every Tremron owner in Ventura: cabinet boxes pulling from the wall is not a two-screw fix, and a failed countertop seam is never just the seam. It’s water, substrate movement, or a bad install underneath. Get the wrong hinge and you’ll drill more holes in a cabinet door than it has, and now the veneer is blown out behind the screw holes. If you want to confirm the part number or the cup size before you buy anything, call (831) 604-3426 and we’ll help you ID it over the phone. If you’d rather not touch it, the truck’s already in Ventura most days. The work says it. We just show up and cut straight.

FAQs

A remodeled family room with new windows and a window seat

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch