A Sawyer company - serving Ventura, CA
An open living room and dining area after a whole-home remodel

Unilock Driveway & Pavers Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A small remodeled galley kitchen with cabinets to the ceiling
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Driveway & Pavers: The Ventura Owner’s Guide

We install and repair Unilock paver driveways and hardscape systems throughout Ventura, with typical driveway installation running $7,000 to $18,000 and individual paver or section repairs starting around $250 to $700. Most Ventura homeowners call us when they notice one of three things: a sunken or heaved section after winter rains, a spreading crack pattern along the driveway edge where the border restraints failed, or efflorescence (that chalky white residue) that keeps coming back. You don’t need a full teardown in most cases, and you shouldn’t have to rip out a whole driveway because one section settled an inch.

Call (831) 604-3426

Here’s the thing about Unilock in Ventura specifically: our clay-heavy soil expands and contracts with our wet winters and dry summers. That movement is the number one reason Unilock driveways fail here, not the pavers themselves. Unilock makes a genuinely solid product. What usually gives out first is what’s underneath and around it: the base, the edge restraint, and the joint sand.

We’re an independent contractor, not a Unilock dealer or corporate service. That means we match your existing pavers by color, size, and series, then install what actually works for Ventura soil conditions, not what a catalog says should work everywhere.

Which Unilock Models This Applies To

A built-in window seat in a bay window

We work with every Unilock paver line you’re likely to find in a Ventura driveway or patio: the Brussels Block, Hollandstone, Courtstone, Town Hall, and Beacon Hill series for flatwork, plus Unilock wall units like the Lineo or U-Cara for retaining and accent walls that tie into the driveway. The compatibility question that matters most is whether your paver is a 2 3/8 inch paver (most driveways in neighborhoods like Midtown, College Area, and east Ventura use these) or a 3 1/8 inch paver (more common on newer builds and commercial-adjacent hardscape). That quarter-inch-plus thickness difference changes your base prep, your edge detailing, and which replacement pavers you can safely mix in.

When you’re trying to identify what you have without pulling anything up, check three places: the underside of any loose paver, the original invoice or permit paperwork from when the driveway was installed, or the side of the driveway where a border course may show the paver profile. Unilock embeds a small product code on most pavers, usually along one edge. If you can’t find it, snap a photo of the top surface and one of the side profile and we’ll ID the series from that.

On OEM versus aftermarket: Unilock strongly recommends OEM, and for color-critical repairs we agree. Their color blends are proprietary, and a paver from another manufacturer that’s “close enough” in the store will look wrong on your driveway within a season of sun and water. For structural components like base material and joint compound, quality aftermarket products like Techniseal or Gator polymeric sand perform as well as Unilock’s own. We stock both.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Driveway & Pavers Is Failing

  • Shifting or rocking pavers. When you step on a paver and it tilts or clicks, your sand has washed out underneath it. Water is getting in, and every rain moves more material. This is an early catch, usually fixed in one visit with sand replacement and compaction.
  • Sinkhole or low spot after a rain. That’s a base failure, not a paver failure. In Ventura’s clay soil, improper compaction at install shows up as dips and bowls. The pavers are fine; what’s under them isn’t. We pull the section, recompact the base, and reset the same pavers.
  • Edge pavers drifting outward. Your edge restraint has failed or was never installed correctly. The restraint is what holds the whole field in tension. Once one edge drifts, every paver in that section shifts with it, and cracks follow.
  • White crust that comes back after cleaning. That’s efflorescence, and the cause is water moving through the pavers and carrying minerals to the surface. If it returns after a good cleaning, the real issue is drainage, not surface chemistry. We fix the drainage and the staining stops.
  • Weeds or grass pushing up between joints. This means your joint sand has degraded to soil. Decades-old driveways in neighborhoods like Midtown with mature trees are prone to this. The fix is re-sanding with polymeric sand that hardens and resists vegetation.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A wide opening with a new beam where the kitchen wall was removed

A full Unilock driveway installation in Ventura runs $7,000 to $18,000, with most residential driveways landing between $9,000 and $14,000. The range depends on square footage, paver thickness, site access (shorter driveways off narrow lanes cost more to stage), and how much base work your soil needs. A paver patio installation runs $3,500 to $11,000 on the same logic. A repair job, whether that’s resetting a settled section, replacing cracked pavers, or re-sanding the joints, runs $250 to $700 per visit depending on how much material we’re moving.

Every quote from Sawyer Remodel Ventura is a written, line-item price before we start any work. That number on the quote is the number on the invoice. It includes the pavers or materials, base prep, labor, haul-off of debris, and a written guarantee on the work. We don’t quote low and “discover” problems once the old surface is up. If we do find something wrong underneath, we show you photos before touching anything else and put the revised number in writing before we proceed.

Job Type Ventura Price Range
Full paver driveway installation $7,000 – $18,000
Paver patio installation $3,500 – $11,000
Driveway replacement (surface plus base) $5,000 – $14,000
Section repair / re-leveling / re-sanding $250 – $700

DIY or Call Us?

Paver repairs are one of the few driveway jobs where a homeowner can safely do real work. If you have a single rocking paver or a low spot under a couple of square feet, you can lift the pavers, add sand, compact, and reset them. It’s heavy work but mechanically simple. If your edges are drifting, your base has failed across a wide area, or you’re seeing water flowing under the driveway, stop guessing. That’s a structural problem, and a bad fix now becomes a bigger one after the next winter rain.

We’ve seen Ventura driveways where homeowners spent weekends trying to patch sinking sections with bags of sand from the hardware store and made the drainage worse. If you’re not sure, call (831) 604-3426. We’ll tell you over the phone whether it sounds like a reset or a resurface, and we’ll come look. The estimate is free, and we’ll give you a written price whether you hire us or not.

FAQs

A stone counter, tile backsplash and open shelf after a kitchen remodel

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch