







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Fence Installation: The Ventura Owner’s Guide
Wellborn fence installation in Ventura typically runs $3,500 to $9,000 for a complete perimeter job, depending on fence style, linear footage, soil conditions, and site prep. We keep Wellborn-compatible fence panels and posts stocked so most installs start within days of your estimate, not weeks. You’ll usually know the old fence is done when the corner post leans past the point of shimming, or two panels rot where the sprinklers hit them every morning. That’s the call we get most.
We’re Sawyer Remodel Ventura, and we’re an independent installer. We are not affiliated with Wellborn, but we work with their fence lines every week. Most homeowners discover their fence has failed the hard way: a strong wind off the Pacific takes a section down, or the gate starts dragging and you realize the post itself is the problem. By the time that happens, the fix is a rebuild, not a patch. We’ll break down the whole process below: what it costs, what goes wrong first, and what you can safely check before picking up the phone.
Which Wellborn Models This Applies To

Wellborn’s fence lineup covers three main series you’ll see around Ventura: the Estate Series (tall privacy panels, 6 to 8 feet), the Garden Series (lower, 3 to 4 feet, decorative picket styles), and the Ranch Series (post-and-rail with optional mesh). The three lines share post dimensions, which is what matters for replacement work: 4×4 posts for Garden, 4×4 or 6×6 for Ranch depending on rail depth, and 6×6 for Estate. If you’re not sure what you have, check the top rail cap or the inside of the post base. Wellborn stamps panels and rails with the series name and a five-digit lot code, usually on the back side of the bottom rail.
Here’s the gotcha most people hit: Wellborn’s vinyl fence posts have a 5×5 square profile on some Ranch Series models, not the more common 4×4 or 5×6. Ordering a generic 5×6 post sleeve off a box-store shelf will leave you with a visibly loose post cap. We match post caps and routed rails to the correct sleeve, because a cap that pops off every week is a call nobody wants to make twice. OEM Wellborn parts are the safe route, but a quality aftermarket post sleeve or top cap from a supplier we trust usually runs 30 to 40 percent less with the same UV stabilizers. We’ll quote both and let you choose.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Fence Installation Is Failing
- Post lean at the corners or gate hinges. This is usually a post base that’s lost its footing in Ventura’s loose, silty soil. The post is fine; the concrete footer below it wasn’t deep enough, and ground pressure from rain cycles is slowly tilting the whole thing.
- Vinyl panels rattling or bowing between posts. The rails that hold panels in place have pulled off their tabs or the bottom rail is cracked. We see this around Midtown and College Park where fences run tight to driveways, and a car bumper or trash bin kiss starts the crack that spreads over two or three seasons.
- Gate drag or a latch that doesn’t line up anymore. The hinge post shifts first, then the gate binds. It’s the single most common complaint. The latch alignment is a symptom, not the root cause.
- Chalky, streaked, or warped panel faces. Ventura’s coastal sun is hard on vinyl. Older Wellborn panels without newer titanium-dioxide UV stabilizers will fade unevenly. It doesn’t look dirty; it looks like the surface is giving up.
- Water pooling at the foot of posts after rain. Drainage around the footer is shot. In Ventura’s clay-adjacent soil, standing water works into the post base and freezes nothing, but softens everything. The post stays but the ground lets go.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Complete Wellborn fence installation in Ventura runs $3,500 to $9,000 installed. A typical 60-foot privacy fence with one gate lands between $4,200 and $6,500. What moves that number: linear footage, fence height, series, gate hardware, slope, and whether we’re pulling old concrete footers or setting fresh posts. Trellis toppers, decorative caps, and custom gate widths add line items but not surprises, because you’ll see them in the written price before we start.
Every quote includes the parts, the labor, the post hole digging and concrete footers, gate hang and latch, and haul-away of the old fence. The price you approve is the price on the invoice. No change orders because a post hole hit a rock, no “materials came in higher” conversations later. We’re licensed and insured, and every Wellborn fence install we do in Ventura carries our Done Right Promise: if something’s not right in the first year, we come back and make it right, in writing, no argument.
DIY or Call Us?
Here’s the honest split. You can safely check three things: series stamp on the bottom rail, post dimensions with a tape measure, and how the gate latch lines up. That information helps us price your job accurately on a phone call. What you shouldn’t do is pull a post footer yourself, especially on a slope. A 6×6 vinyl post set in 24 inches of concrete is a two-person job with the wrong tools and a weak point waiting to happen. We’ve repaired more than a few posts where the previous homeowner dug out three inches, gave up, and tamped the dirt back in with a shovel handle. The fence leans harder in six months.
If a section has come down and it’s resting against a power line or a meter bank, leave it alone and call us. Same with any post that’s snapped at the base and is under load from the gate. That’s tension, not leverage. Call (831) 604-3426 and we’ll take it from there.
FAQs

A properly installed Wellborn fence in Ventura lasts 15 to 25 years before panels need cosmetic attention, and longer for the posts if the footers are set below the frost line and well drained. The killer is UV and soil, not the material itself.
Yes. If the posts are still plumb and only the rails or panels are cracked, we can often replace just the damaged section without rebuilding the whole run. We’ll tell you if a repair buys you five more years or just one. Call (831) 604-3426 for an honest look.
Most Wellborn fence installs take two to four working days, including pulling the old fence, setting new post footers with a day of cure time, and hanging panels and gates. Weather can stretch that, but you’ll get a written schedule before work starts.
We stock Wellborn-compatible post sleeves, top caps, gate hardware, and standard panel sections for the Estate and Garden Series. Ranch Series rails and posts are usually one to three days from our Ventura supplier. We’ll confirm availability on your first call.
If your Wellborn fence is leaning, dragging, or just looking older than you feel, call (831) 604-3426 for a free estimate. We’ll send someone out, measure the whole run, and get you a written price that doesn’t move. The work says it. We just show up and cut straight.
Written by Sawyer Remodel Ventura, Sawyer Remodel Ventura at Sawyer Remodel Ventura, serving Ventura and nearby areas.


