A Sawyer company - serving Ventura, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Wellborn Kitchen Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Ventura
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
A remodeled kitchen with painted cabinets and a farmhouse sink
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Wellborn Kitchen Remodeling: The Ventura Owner’s Guide

Wellborn kitchen remodeling in Ventura typically runs $14,000 to $45,000 for a full rework, with cabinet replacement or reconditioning accounting for the largest share of that range. If your cabinets are failing, a faster targeted fix like replacing doors, drawer fronts, hinges, or drawer boxes is usually under $6,000. Most Ventura kitchens we open up fall into one of two camps: cabinets that still have solid boxes but worn hardware and fronts, or cabinets with water damage, swollen MDF, and failed joinery that’s past the point of a parts-only repair.

Call (831) 604-3426

You probably landed here because something stopped working the way it should. A drawer drags or racks sideways when you pull it. A door hangs at a weird angle no matter how many times you fiddle with the hinge screw. A corner of the cabinet base looks darker than it used to, soft under the edge of the sink. That’s how it starts. The good news is Wellborn builds cabinets with dimensions and specs that are consistent across their lines, which means the right part matched to the right series goes in clean. We stock the common failure points on hand and we do most Ventura cabinet repairs in one visit.

Which Wellborn Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

We work on the Wellborn product families most common in Ventura homes: Cabinet Collections, Wellborn Closets, Estate, Premier, and Select Series. Each series uses its own door profile thickness, hinge cup bore pattern, and drawer box construction, so a hinge from the Estate line won’t always sit flush on a Premier door even if the screw pattern looks close. That’s the compatibility gotcha we see all the time. The labels tell the story: Wellborn stamps the cabinet’s series code and production date on a small printed tag inside the drawer box or on the back of a door. Photograph that tag before you call anyone, including us.

For hardware-specific failures, the hinge cup bore is almost always 35 millimeters on Wellborn doors made after the mid-2000s. Older Ventura homes with original 1980s Wellborn boxes sometimes have a 26mm bored hinge, and nobody stocks those at a parts counter. We do. If you’re deciding between OEM Wellborn parts and quality aftermarket equivalents, our honest position is this: soft-close slide-and-hinge hardware from Blum or Salice fits Wellborn’s specs exactly and often carries a longer warranty than the original. For doors, drawer fronts, and moldings, we order OEM Wellborn when the series is still in production. If Wellborn has discontinued the series, we match the profile with a custom mill run from the same hardwood species and finish-mix to the existing patina. For tile, countertop, and stone surfaces tied into the remodel, we pull from our material partners including Cambria and Silestone, plus KraftMaid for cabinet lines when a full box swap makes more sense than a parts repair.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Wellborn Kitchen Remodeling Is Failing

  • Drawers that stick, rack, or drop on one side. The epoxy-coated undermount slide has lost its bearing cage or the back bracket screw has stripped out of the cabinet wall. In seaside Ventura air, slides that live near the dishwater see accelerated corrosion and fail faster than inland units.
  • Doors that won’t stay closed or won’t close all the way. The self-close hinge spring is worn out or the hinge plate’s nylon catch snapped. Adjusting the screw only helps for a few days before it drifts back.
  • A corner of the cabinet base that feels soft or looks swollen. Water has worked into the MDF or particleboard core, usually from a sink supply line, a dishwasher vent, or years of standing moisture on the countertop seam. Once the core swells, the box loses structural strength and the fix is a new box, not a patch.
  • Finish delaminating on door and drawer fronts near the stove or dishwasher. Steam heat breaks the adhesive bond Wellborn uses on thermofoil and laminate fronts. The surface starts as a faint bubble then peels in sheets. New fronts are the permanent fix.
  • Shelves bowing in the middle with heavy dish loads. The original shelf was rated for standard weight but years of stoneware stacks exceed it. Fixed shelves can be removed and replaced with 3/4-inch plywood of the same depth; adjustable shelf clips wear out their holes and the shelf drops.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with subway tile and a floating vanity

Here’s what Wellborn cabinet work costs in Ventura, parts and labor included:

  • Cabinet installation (new boxes, full run): $4,000 to $13,000 depending on linear footage and whether we’re reusing your existing footprint or changing the layout.
  • Targeted parts repair (hinges, slides, drawer boxes, door fronts): $300 to $1,800 for a typical five-to-ten cabinet job.
  • Full kitchen remodel including cabinets, counters, backsplash, island: $14,000 to $45,000.
  • Small kitchen remodel focused on a single wall run: $9,000 to $20,000.
  • Countertop replacement tied to a cabinet repair: $2,000 to $6,500 for fabrication and install.
  • Kitchen island build-out or rebuild: $3,000 to $10,000.

The range moves on three things: the number of boxes, the series of Wellborn you have, and whether we’re repairing the existing footprint or changing the layout. Every job gets a written line-item price before we start. The number you approve is the number on the invoice, no change orders because the job turned out harder than we thought. And every parts repair carries our Done Right Promise: if it’s not done right, we make it right, in writing, for a full year after the work.

DIY or Call Us?

You can check a few things without opening a toolbox. Pull the drawer out and look at the slide on each side. If one bracket is hanging loose, that’s your issue. On a door that drifts, open it and watch the hinge cup where it seats into the door face. If the screws spin without tightening, the bore holes are stripped. Those are diagnostic steps. The repair itself is where owners get into trouble in Ventura. Undermount slides have a release tab you have to hit just right. Hinge plates have mortises that need to match the original’s depth or the door sits proud of the face frame. And if you’ve got a swollen cabinet box under the sink, that’s not a parts fix at all, it’s a structural replacement. Cutting into a wet, failed box near supply lines and a disposal is work for someone who does it every week. Call (831) 604-3426 and we’ll put eyes on it. The estimate is free.

FAQs

A remodeled primary suite with built-in wardrobes and a window seat

Getting started with Sawyer in Ventura

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Ventura team

A local vetted partner works across Ventura and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Ventura? Licensed & insured · free written estimates
Call (831) 604-3426
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Sawyer Remodel Ventura responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch