







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Cabinet Installation Cost in Ventura?
Cabinet installation in Ventura, CA typically costs between $4,000 and $13,000 for a full kitchen, including labor and materials. Most homeowners in the Ventura area spend around $7,500 for a standard 10×10 kitchen with mid-range stock or semi-custom cabinets. The final number depends on cabinet quality, kitchen size, whether you’re refacing or replacing, and how much prep work the existing walls and floors require.
That’s the number you came for. But the spread between $4,000 and $13,000 is wide, and knowing where your project lands matters. A galley kitchen in a Midtown Ventura condo will price differently than a full custom layout in a Foothill Road hillside home. Here’s exactly how the math breaks down.
Key Takeaways:
- Full kitchen cabinet installation in Ventura: $4,000 – $13,000
- Labor alone typically runs $50 – $100 per cabinet or $75 – $150 per hour
- Stock cabinets cost $100 – $300 per linear foot; semi-custom runs $200 – $600; custom starts around $500 – $1,200+
- Refacing existing boxes runs $3,000 – $7,000 – roughly 30 – 50% less than full replacement
- Ventura’s coastal humidity and older housing stock (much of it built 1940s – 1970s) often means more wall prep than homeowners expect

Cabinet Installation Cost Breakdown (2026)
Here’s the line-item breakdown for a typical Ventura kitchen cabinet project. These are real market numbers, not national averages with a California markup slapped on top. We price based on what we actually see in homes from Montalvo to the Keys.
| Line Item | Typical Ventura Range | Notes |
|---|---|---|
| Stock cabinets (10×10 kitchen, materials only) | $2,000 – $4,500 | In-stock boxes from KraftMaid or comparable; limited sizes and finishes |
| Semi-custom cabinets (10×10 kitchen, materials only) | $4,500 – $9,000 | KraftMaid, Wellborn, or similar with size and finish flexibility |
| Custom cabinets (10×10 kitchen, materials only) | $9,000 – $20,000+ | Built to spec; most common in higher-end East Ventura and hillside homes |
| Installation labor (per cabinet box) | $50 – $100 | Includes leveling, shimming, mounting, hardware install |
| Installation labor (hourly, for complex jobs) | $75 – $150 | Tear-out, wall repair, custom fitting |
| Old cabinet removal & disposal | $300 – $800 | Higher if asbestos testing is needed (common in pre-1980 Ventura homes) |
| Hardware (knobs, pulls, soft-close hinges) | $100 – $600 | Soft-close upgrades add $10 – $30 per cabinet |
| Drywall repair & painting after tear-out | $400 – $1,500 | Almost always needed; old cabinets hide wall damage |
| Permit fees (if structural or electrical work involved) | $150 – $600 | City of Ventura building permit; not always required for cabinet-only swaps |
What pushes a project toward the top of that range? Custom cabinet boxes with full-extension drawers and soft-close everything, a kitchen larger than 200 square feet, a galley layout with tricky corners, and houses where the walls are out of level (which is most of 1950s-era Ventura construction). What keeps it low? Stock boxes you order unassembled, a simple L-shape layout, and walls that are close to plumb.
One thing specific to Ventura: many homes built before 1980 have plaster walls rather than drywall. Plaster is harder to patch cleanly after cabinet tear-out, and getting a flush fit for new cabinets takes more shimming and more time. It’s not a deal-breaker, but it’s a real labor cost that national price guides miss.
What Affects Cabinet Installation Pricing in Ventura
- Cabinet type (stock vs. semi-custom vs. custom). Stock cabinets are pre-built in standard sizes and ship in days. Semi-custom gives you size and finish flexibility with a 4 – 8 week lead time. Custom is built to your exact dimensions, often 8 – 12 weeks out, and costs accordingly.
- Kitchen size and layout. A 10×10 L-shape kitchen might need 12 – 15 cabinet boxes. A large open kitchen in a newer Tract 2380 home could need 25 – 30 boxes plus an island. Each box adds labor and materials.
- Condition of existing walls and floors. Tear-out reveals what’s behind. In older Midtown and Avenue-area homes, we regularly find uneven studs, water staining from old plumbing, or floor sag that needs correction before new cabinets can sit level. A DIY-level install on a wavy wall leaves gaps you’ll see every day.
- Finish and hardware choices. Painted finishes cost more than natural wood veneer. Full-overlay doors cost more than standard overlay. Soft-close hinges, drawer organizers, pull-out shelves, and tall pantry units all add $20 – $100 per cabinet.
- Plumbing or electrical work. If your new cabinet layout moves the sink, cooktop, or outlets, you’ll need a plumber and electrician on site. In Ventura, any electrical work beyond a like-for-like swap requires a permit through the City’s Building & Safety division.
- Access and parking. This one surprises people. Beach-adjacent neighborhoods like Pierpont or the Keys have tight streets and limited parking. If the local pro has to haul cabinets half a block or work around a steep hillside driveway, labor time goes up. It’s Ventura-specific, and it’s real.

How to Save on Cabinet Installation
You don’t have to go cheap to save money. You have to be strategic.
Reface instead of replace when the boxes are sound. If your cabinet boxes are square, dry, and still holding a screw, refacing runs $3,000 – $7,000 in Ventura. That’s new doors, new drawer fronts, and new veneer on the face frames for roughly half the cost of full replacement. We’ll tell you honestly if refacing makes sense. Sometimes it doesn’t, and we’ll say so.
Choose stock boxes and spend on hardware. The visible difference between stock and semi-custom is mostly in the details. Stock cabinets from KraftMaid or similar with upgraded soft-close hinges and good pulls look and feel far better than their price suggests.
Keep the sink and cooktop where they are. Moving plumbing or electrical is where unplanned costs hide. If your current layout works, keep it. You can change cabinet sizes and configurations around a fixed sink location without touching the rough plumbing.
Ask for a written price before any work starts. That’s not a generic tip. It’s how Sawyer Remodel Ventura works, and it’s the single biggest way to avoid the “$2,000 surprise” cabinet invoices we’ve heard about from homeowners who went with a low-bid contractor. Under The Relay Standard, you get a written price with the full scope before a single tool is picked up. The number you approve is the number you pay.
For an exact quote on your kitchen, call us at (831) 604-3426. Estimates are free, and you’ll get a real number, not a ballpark.
Is It Cheaper to Repair or Replace Cabinets in Ventura?
Repairing is almost always cheaper in the short term, at $150 – $600 for typical fixes like sagging hinges, broken drawer slides, or a water-damaged floor cabinet. But if multiple boxes show wear, the door faces are delaminating from coastal moisture, or the layout doesn’t work for how you live, replacing becomes the better long-term call. We tell Ventura homeowners the truth: a $400 repair on a cabinet that’ll fail again in a year costs more than the first step toward replacement.
FAQs – Cabinet Installation Cost
How much does it cost to install cabinets in a 10×10 kitchen in Ventura?
A 10×10 kitchen in Ventura typically costs $4,000 – $8,000 for stock or entry-level semi-custom cabinets installed, with mid-range semi-custom running $7,000 – $13,000. The 10×10 size (roughly 12 – 15 cabinet boxes) is the standard industry measuring stick. Call (831) 604-3426 for a written quote on your actual layout.
How much does cabinet installation labor cost per cabinet?
Labor runs $50 – $100 per cabinet box in Ventura, which includes leveling, shimming, mounting, and hardware. Complex jobs with wall repair or custom fitting can push labor to $75 – $150 per hour. Most installs of 12 – 15 boxes take a crew one to two days.
How long does cabinet installation take?
Most Ventura kitchen cabinet installations take 2 – 4 days once materials are on site. Tear-out is usually a half day, wall prep takes a day, and hanging plus hardware takes one to two days. Custom cabinet orders add an 8 – 12 week lead time before install begins. Stock and many semi-custom lines ship in 2 – 6 weeks.
Can I install cabinets myself to save money?
You can, and you’d save the labor portion of the bill: roughly $600 – $3,000 depending on kitchen size. But cabinet installation is not IKEA assembly. Leveling boxes on wavy Ventura plaster walls, scribing fillers to fit, and aligning doors so they don’t bind takes experience. We’ve been called in to fix DIY installs where the homeowner spent more on the do-over than the original labor would have cost. If you do go DIY, budget two full weekends and a laser level.
How much does cabinet refacing cost compared to replacement in Ventura?
Cabinet refacing in Ventura runs $3,000 – $7,000, or about 30 – 50% less than full replacement. Refacing keeps your existing boxes and replaces doors, drawer fronts, and face frame veneer. It’s a good option when the boxes are structurally solid and the layout works. If your boxes have water damage, warping, or you want to change the layout, full replacement is the right call.
Do I need a permit for cabinet installation in Ventura?
For a cabinet-only swap with no electrical, plumbing, or structural changes, you typically do not need a permit in the City of Ventura. If the project moves outlets, relocates a sink, or opens walls, you’ll need a permit through Building & Safety, which adds $150 – $600 to the project. Sawyer Remodel Ventura handles the permit process as part of our written scope, so you’re never left guessing.
Choosing a Cabinet Installer in Ventura
When you hire someone to install cabinets, you’re hiring them to do the kind of detail work you’ll look at every single day. Gaps at the wall, doors that hang crooked, drawers that stick: these aren’t things you’ll forget. They’re the first thing you’ll notice every time you reach for a plate.
Sawyer Remodel Ventura runs every job under The Relay Visibility Guarantee. That means three things, in writing, before work begins: a written price that doesn’t change, a live arrival time so you’re not burning a day waiting, and photo updates before and after so you see exactly what got done.
We’ve been doing this, first as a general contractor and now as part of the Relay Home Co. family of independent local businesses. Every project carries our Done Right Promise: if it’s not done right, we make it right, covered in writing for a full year after the job closes. And if a repair ever fails, the second visit is free.
On materials, we install cabinets from KraftMaid and Wellborn and pair them with countertops from Cambria and Caesarstone, fixtures from Kohler and Toto. You’re choosing from brands with manufacturer backing behind the install, not mystery boxes from a supply house.
From our home page you can see the full scope of services, and our Cabinet Installation in Ventura page covers the install process in depth. If you’re ready for a number, we’re ready to give you one.
Get a Written Cabinet Installation Quote in Ventura
You shouldn’t have to call three companies and wait a week to know what your kitchen will cost. Call Sawyer Remodel Ventura at (831) 604-3426 and we’ll schedule a free estimate. You’ll get a written price with the full scope, exact line items, and a timeline. We answer the phone when you call, 24/7, with a live person, not a voicemail loop.
If you’re still researching, that’s fine too. The number you get from us will match the ranges on this page, and you can compare it against anyone else in Ventura. That’s how we want you to make the decision.
Pricing reflects the Ventura market as of 2026. Sawyer Remodel Ventura offers free estimates – call (831) 604-3426.
Written by the team at Sawyer Remodel Ventura.
What Our Customers Say
"Home renovation with a new layout. Permits and inspections were all tracked online."
- Nolan R."Booked a kitchen consult online and got a project timeline in the app. Crew texted each morning with the day's plan. Cabinets, counters, and backsplash look great."
- Erin K."Bathroom remodel. Tile and shower niche are flawless. Updates by text kept me in the loop."
- Hugh P.











